Commit b3db6668 authored by Bernhard Landauer's avatar Bernhard Landauer

some more dialog formatting

parent fd34260e
......@@ -103,7 +103,7 @@ _LvmDelVG="Delete Volume Groups"
_LvMDelAll="Delete *ALL* VGs, LVs, PVs"
_LvmDetBody="Existing Logical Volume Management (LVM) detected. Activating. Please Wait..."
_LvmPartErrBody="There are no viable partitions available to use for Logical Volume Management. A minimum of one is required.\n\nIf LVM is already in use, deactivating it will allow the partition(s) used for its Physical Volume(s) to be used again."
_LvmNameVgBody="Enter the name of the Volume Group (VG) to create.\n\nThe VG is the new 'virtual device / hard-disk' to create out of the partition(s) selected next."
_LvmNameVgBody="Enter the name of the Volume Group (VG) to create.\n\nThe VG is the new 'virtual device/hard-disk' to create out of the partition(s) selected next."
_LvmNameVgErr="Invalid Name Entered. The Volume Group name may be alpha-numeric, but may not contain spaces, start with a '/', or already be in use."
_LvmPvSelBody="Select the partition(s) to use for the Physical Volume (PV)."
_LvmPvConfBody1="Confirm creation of Volume Group"
......@@ -113,12 +113,12 @@ _LvmPvDoneBody1="Volume Group"
_LvmPvDoneBody2="has been created"
_LvmLvNumBody1="Enter the number of Logical Volumes (LVs) to create in"
_LvmLvNumBody2="The last (or only) LV will automatically use 100% of the remaining space in the Volume Group."
_LvmLvNameBody1="Enter the name of the Logical Volume (LV) to create.\n\nThis is like setting a name / label for a partition."
_LvmLvNameBody1="Enter the name of the Logical Volume (LV) to create.\n\nThis is like setting a name or label for a partition."
_LvmLvNameBody2="NOTE: This LV will automatically use up all space remaining on the Volume Group"
_LvmLvNameErrBody="Invalid Name Entered. The Logical Volume (LV) name may be alpha-numeric, but may not contain spaces or be preceeded with a '/'."
_LvmLvSizeBody1="remaining"
_LvmLvSizeBody2="Enter the size of the Logical Volume (LV) in Megabytes (M) or Gigabytes (G). For example, 100M will create a 100 Megabyte LV. 10G will create a 10 Gigabyte LV."
_LvmLvSizeErrBody="Invalid value Entered. A numeric value must be entered with an 'M' (Megabytes) or a 'G' (Gigabytes) at the end.\n\nExamples include, 100M, 10G, or 250M. The value may also not be equal to or greater than the remaining size of the VG."
_LvmLvSizeBody2="Enter the size of the Logical Volume (LV) in Megabytes (M) or Gigabytes (G).\nFor example:\n100M will create a 100 Megabyte LV, 10G will create a 10 Gigabyte LV."
_LvmLvSizeErrBody="Invalid value entered.\nA numeric value must be entered with an 'M' (Megabytes) or a 'G' (Gigabytes) at the end.\nExamples include, 100M, 10G, or 250M.\nThe value may also not be equal to or greater than the remaining size of the VG!"
_LvmCompBody="Done! All Logical Volumes have been created for the Volume Group.\n\nDo you wish to view the new LVM scheme?"
_LvmDelQ="Confirm deletion of Volume Group(s) and Logical Volume(s).\n\nIf deleting a Volume Group, all Logical Volumes within will be deleted as well."
_LvmSelVGBody="Select Volume Group to delete. All Logical Volumes within will also be deleted."
......
......@@ -116,7 +116,7 @@ _LvmLvNameBody1="Geben Sie den Namen des zu erstellenden LV.\n\n Dies is der Nam
_LvmLvNameBody2="HINWEIS: Dieses LV wird automatisch den gesamten verfügbaren Speicherplatz auf der Volume Group einnehmen."
_LvmLvNameErrBody="Ungültiger Name eingegeben. Der Name eines LV muss alpha-numerisch sein, darf jedoch keine Leerzeichen einthalten oder mit '/' beginenn."
_LvmLvSizeBody1="verbleibend"
_LvmLvSizeBody2="Geben Sie die Größe des LV in Megabytes (M) oder Gigabytes (G) ein. Z.B. wird bei 100M ein LV von 100 Megabytes erzeugt, bei 10Gein LV von 10 Gigabytes."
_LvmLvSizeBody2="Geben Sie die Größe des LV in Megabytes (M) oder Gigabytes (G) ein.\nZ.B. wird bei 100M ein LV von 100 Megabytes erzeugt, bei 10G ein LV von 10 Gigabytes."
_LvmLvSizeErrBody="Ungültigen Wert eigegeben. Ein numerischer Wert mit einem 'M' (Megabytes) oder 'G' (Gigabytes) am Ende muss eigegeben werden.\n\nBeispiele: 100M, 10G, oder 250M. Der Wert darf nicht größer oder gleich der verbleibenden Größe der VG sein."
_LvmCompBody="Fertig! Alle Logical Volumes für die Volume Group wurden erzeugt.\n\nMöchte Sie sich das neue LVM-Schema anzeigen lassen?"
_LvmDelQ="Bestätigen Sie, dass Volume Group(s) bzw. Logical Volume(s) gelöscht werden sollen.\n\n Wenn eine Volume Group gelöscht wird, werden alle darin enthaltenen Logical Volumes ebenfalls gelöscht."
......
......@@ -638,7 +638,7 @@ lvm_create() {
# Convert the VG size into GB and MB. These variables are used to keep tabs on space available and remaining
[[ ${VG_SIZE_TYPE:0:1} == "G" ]] && LVM_VG_MB=$(( VG_SIZE * 1000 )) || LVM_VG_MB=$VG_SIZE
DIALOG " $_LvmCreateVG " --msgbox "\n$_LvmPvDoneBody1 '${LVM_VG}' (${VG_SIZE} ${VG_SIZE_TYPE}) $_LvmPvDoneBody2.\n " 0 0 || return 0
DIALOG " $_LvmCreateVG " --msgbox "\n$_LvmPvDoneBody1 [${LVM_VG}] (${VG_SIZE} ${VG_SIZE_TYPE}) $_LvmPvDoneBody2.\n " 0 0 || return 0
fi
#
......@@ -667,8 +667,8 @@ lvm_create() {
LVM_LV_NAME=$(cat ${ANSWER})
done
DIALOG " $_LvmCreateVG (LV:$NUMBER_LOGICAL_VOLUMES) " --inputbox "\n${LVM_VG}: ${VG_SIZE}${VG_SIZE_TYPE} (${LVM_VG_MB}MB \
$_LvmLvSizeBody1).$_LvmLvSizeBody2\n " 0 0 "" 2>${ANSWER} || return 0
DIALOG " $_LvmCreateVG (LV:$NUMBER_LOGICAL_VOLUMES) " --inputbox \
"\n[${LVM_VG}]: ${VG_SIZE}${VG_SIZE_TYPE} - (${LVM_VG_MB}MB $_LvmLvSizeBody1).\n\n$_LvmLvSizeBody2\n " 0 0 "" 2>${ANSWER} || return 0
LVM_LV_SIZE=$(cat ${ANSWER})
check_lv_size
......@@ -676,7 +676,7 @@ lvm_create() {
while [[ $LV_SIZE_INVALID -eq 1 ]]; do
DIALOG " $_ErrTitle " --msgbox "\n$_LvmLvSizeErrBody\n " 0 0
DIALOG " $_LvmCreateVG (LV:$NUMBER_LOGICAL_VOLUMES) " --inputbox \
"\n${LVM_VG}: ${VG_SIZE}${VG_SIZE_TYPE} (${LVM_VG_MB}MB $_LvmLvSizeBody1).$_LvmLvSizeBody2\n " 0 0 2>${ANSWER} || return 0
"\n[${LVM_VG}]: ${VG_SIZE}${VG_SIZE_TYPE} - (${LVM_VG_MB}MB $_LvmLvSizeBody1).\n\n$_LvmLvSizeBody2\n " 0 0 "" 2>${ANSWER} || return 0
LVM_LV_SIZE=$(cat ${ANSWER})
check_lv_size
done
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment