Commit 0f59c1ac authored by Manuel Barrette's avatar Manuel Barrette

Small corrections, improved format

parent 2081976b
......@@ -2893,7 +2893,7 @@ Some newer hardware do not use the well-known BIOS to manage boot options.
UEFI often goes hand in hand with the infamous Secure Boot option that
makes it more difficult to boot operating systems outside of a select few.
If your computer came with Microsoft Windows 8 or later installed, your
computer uses UEFI and probably has Secure Boot enabled by default.
computer probably uses UEFI and has Secure Boot enabled by default.
However, the Linux community reacted to this and developed means to install
and boot Linux on those systems as well.
Some installers, such as
......@@ -2916,9 +2916,9 @@ The most important step is to ensure that your machine does not have Secure
\series default
.
Only a very limited number of operating systems will boot with this enabled.
You must disable Secure Boot in your BIOS before proceeding; if you don't
know how to do this please refer to your computer's user manual, as it
differs for all computers.
You must disable Secure Boot in your UEFI/BIOS before proceeding; if you
don't know how to do this please refer to your computer's user manual,
as it differs for all computers.
\end_layout
\begin_layout Section
......@@ -3036,7 +3036,6 @@ lang=en_US
\series default
key.
A list of available languages will appear.
In this instance, English (US) has been highlighted for the user.
\end_layout
\begin_layout Standard
......@@ -3138,15 +3137,26 @@ Enter
>.
If you cannot find the one you are used to, do not worry, you will be able
to select it once in the Live environment (see subsection
\series bold
\begin_inset CommandInset ref
LatexCommand nameref
reference "keyboard_layout"
\end_inset
\series default
).
\end_layout
\begin_layout Standard
\begin_inset Newpage newpage
\end_inset
\end_layout
\begin_layout Section
Choosing the drivers
\end_layout
......@@ -4284,6 +4294,25 @@ Click and drag the separation between the two parts to change the amount
You can also choose to encrypt your Manjaro partition.
That way, anyone trying to access to the data it contains will have to
enter a password of your choosing.
For more information, see chapter
\series bold
\begin_inset CommandInset ref
LatexCommand nameref
reference "encryption"
\end_inset
\series default
.
\end_layout
\begin_layout Standard
\begin_inset Newpage newpage
\end_inset
\end_layout
\begin_layout Subsection
......@@ -4341,6 +4370,13 @@ password
\end_inset
\end_layout
\begin_layout Standard
\begin_inset Newpage newpage
\end_inset
\end_layout
\begin_layout Subsection
......@@ -4620,12 +4656,16 @@ reference "advancedInstallBIOS"
\series default
for a BIOS system and
\series bold
\begin_inset CommandInset ref
LatexCommand nameref
reference "advancedInstallUEFI"
\end_inset
\series default
for a UEFI system.
\end_layout
......@@ -4642,7 +4682,7 @@ The key difference in the way the partitions are arranged compared to the
of this partition if it does not already exist and writes the necessary
files to it.
If the partition already exists, it is detected and used to write the files.
In this section, it is on partition
In this section, for UEFI systems, it is on partition
\emph on
sda1
\emph default
......@@ -4758,7 +4798,7 @@ setcounter{figure}{0}
\begin_layout Standard
Other than that, the process involved in each assisted installation option
is the same wether you are on a UEFI or BIOS system.
is the same whether you are on a UEFI or BIOS system.
Calamares takes care of the differences for you.
For specific instructions about dual-booting with Windows, see chapter
......@@ -4817,12 +4857,16 @@ When clicking on a partition in the bar representing the current state,
the bottom bar will change to show this partition split in two.
Drag the demarcation to adjust the size of the new partition, as shown
in section
\series bold
\begin_inset CommandInset ref
LatexCommand nameref
reference "windows10"
\end_inset
\series default
.
On a UEFI system, the suggested partition setup will mention if an existing
EFI partition was detected.
......@@ -5171,8 +5215,6 @@ reference "summary"
\series default
.
On a UEFI system, Calamares suggests a EFI partition at the beginning,
a root partition for Manjaro and a swap partition at the end.
\end_layout
\end_inset
......@@ -5478,7 +5520,7 @@ status open
\begin_layout Plain Layout
\begin_inset Graphics
filename images/calamares-manual/man_part_edit.png
filename images/calamares-manual-BIOS/edit.png
lyxscale 50
width 100col%
......@@ -5517,7 +5559,7 @@ status open
\begin_layout Plain Layout
\begin_inset Graphics
filename images/calamares-manual-BIOS/edit.png
filename images/calamares-manual-BIOS/resize.png
lyxscale 50
width 50col%
......@@ -6332,12 +6374,16 @@ status open
Congratulations, you have now successfully created new partitions which
you will be able to use to install Manjaro! This is especially useful when
partitioning manually or when replacing an existing partition (
\series bold
\begin_inset CommandInset ref
LatexCommand nameref
reference "replace"
\end_inset
\series default
).
\end_layout
......@@ -7457,7 +7503,7 @@ That's it! Your partitions are all set up and ready to use in the installer.
\end_layout
\begin_layout Subsection
Using the partitions
Use the partitions
\end_layout
\begin_layout Standard
......@@ -7582,19 +7628,6 @@ status open
\begin_layout Plain Layout
Next, select the other partitions you want to use and choose their respective
mount points.
If you want to dual-boot, you may want to shrink an existing partition
and create partitions for Manjaro as illustrated in chapter
\series bold
\begin_inset CommandInset ref
LatexCommand nameref
reference "advancedInstallBIOS"
\end_inset
\series default
.
\end_layout
\end_inset
......@@ -7832,13 +7865,12 @@ status open
\begin_inset Caption Standard
\begin_layout Plain Layout
Like in the previous section, but this time using the manual partitioning
option, select the partition used as the C: drive by Windows and
Select the partition used as the C: drive by Windows and
\series bold
Edit
\series default
it.
As previously stated, it should be the biggest one.
It should be the biggest one.
\end_layout
\end_inset
......@@ -8085,6 +8117,16 @@ Next
Encrypting your partitions
\end_layout
\begin_layout Standard
\begin_inset CommandInset label
LatexCommand label
name "encryption"
\end_inset
\end_layout
\begin_layout Standard
In order to prevent others from accessing the data stored on your drive,
you may want to encrypt your partitions.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment