overlays/nemomobile/etc/bluetooth/main.conf

+[General]
+
+# Default adapter name
+# Defaults to 'BlueZ X.YZ'
+#Name = BlueZ
+
+# Default device class. Only the major and minor device class bits are
+# considered. Defaults to '0x000000'.
+# Phone, smart-phone
+Class = 0x00020c
+
+# How long to stay in discoverable mode before going back to non-discoverable
+# The value is in seconds. Default is 180, i.e. 3 minutes.
+# 0 = disable timer, i.e. stay discoverable forever
+#DiscoverableTimeout = 0
+
+# Always allow pairing even if there are no agent registered
+# Possible values: true, false
+# Default: false
+#AlwaysPairable = false
+
+# How long to stay in pairable mode before going back to non-discoverable
+# The value is in seconds. Default is 0.
+# 0 = disable timer, i.e. stay pairable forever
+#PairableTimeout = 0
+
+# Use vendor id source (assigner), vendor, product and version information for
+# DID profile support. The values are separated by ":" and assigner, VID, PID
+# and version.
+# Possible vendor id source values: bluetooth, usb (default) or false (disabled)
+#DeviceID = bluetooth:1234:5678:abcd
+
+# Do reverse service discovery for previously unknown devices that connect to
+# us. For BR/EDR this option is really only needed for qualification since the
+# BITE tester doesn't like us doing reverse SDP for some test cases, for LE
+# this disables the GATT client functionally so it can be used in system which
+# can only operate as peripheral.
+# Defaults to 'true'.
+#ReverseServiceDiscovery = true
+
+# Enable name resolving after inquiry. Set it to 'false' if you don't need
+# remote devices name and want shorter discovery cycle. Defaults to 'true'.
+#NameResolving = true
+
+# Enable runtime persistency of debug link keys. Default is false which
+# makes debug link keys valid only for the duration of the connection
+# that they were created for.
+#DebugKeys = false
+
+# Restricts all controllers to the specified transport. Default value
+# is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW).
+# Possible values: "dual", "bredr", "le"
+#ControllerMode = dual
+
+# Enables Multi Profile Specification support. This allows to specify if
+# system supports only Multiple Profiles Single Device (MPSD) configuration
+# or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple
+# Devices (MPMD) configurations.
+# Possible values: "off", "single", "multiple"
+#MultiProfile = off
+
+# Permanently enables the Fast Connectable setting for adapters that
+# support it. When enabled other devices can connect faster to us,
+# however the tradeoff is increased power consumptions. This feature
+# will fully work only on kernel version 4.1 and newer. Defaults to
+# 'false'.
+#FastConnectable = false
+
+# Default privacy setting.
+# Enables use of private address.
+# Possible values: "off", "device", "network"
+# "network" option not supported currently
+# Defaults to "off"
+#Privacy = off
+
+# Specify the policy to the JUST-WORKS repairing initiated by peer
+# Possible values: "never", "confirm", "always"
+# Defaults to "never"
+#JustWorksRepairing = never
+
+# How long to keep temporary devices around
+# The value is in seconds. Default is 30.
+# 0 = disable timer, i.e. never keep temporary devices
+#TemporaryTimeout = 30
+
+# Enables the device to issue an SDP request to update known services when
+# profile is connected. Defaults to true.
+#RefreshDiscovery = true
+
+# Enables experimental features and interfaces.
+# Defaults to false.
+#Experimental = false
+
+[BR]
+# The following values are used to load default adapter parameters for BR/EDR.
+# BlueZ loads the values into the kernel before the adapter is powered if the
+# kernel supports the MGMT_LOAD_DEFAULT_PARAMETERS command. If a value isn't
+# provided, the kernel will be initialized to it's default value.  The actual
+# value will vary based on the kernel version and thus aren't provided here.
+# The Bluetooth Core Specification should be consulted for the meaning and valid
+# domain of each of these values.
+
+# BR/EDR Page scan activity configuration
+#PageScanType=
+#PageScanInterval=
+#PageScanWindow=
+
+# BR/EDR Inquiry scan activity configuration
+#InquiryScanType=
+#InquiryScanInterval=
+#InquiryScanWindow=
+
+# BR/EDR Link supervision timeout
+#LinkSupervisionTimeout=
+
+# BR/EDR Page Timeout
+#PageTimeout=
+
+# BR/EDR Sniff Intervals
+#MinSniffInterval=
+#MaxSniffInterval=
+
+[LE]
+# The following values are used to load default adapter parameters for LE.
+# BlueZ loads the values into the kernel before the adapter is powered if the
+# kernel supports the MGMT_LOAD_DEFAULT_PARAMETERS command. If a value isn't
+# provided, the kernel will be initialized to it's default value.  The actual
+# value will vary based on the kernel version and thus aren't provided here.
+# The Bluetooth Core Specification should be consulted for the meaning and valid
+# domain of each of these values.
+# LE advertisement interval (used for legacy advertisement interface only)
+#MinAdvertisementInterval=
+#MaxAdvertisementInterval=
+#MultiAdvertisementRotationInterval=
+
+# LE scanning parameters used for passive scanning supporting auto connect
+# scenarios
+#ScanIntervalAutoConnect=
+#ScanWindowAutoConnect=
+
+# LE scanning parameters used for passive scanning supporting wake from suspend
+# scenarios
+#ScanIntervalSuspend=
+#ScanWindowSuspend=
+
+# LE scanning parameters used for active scanning supporting discovery
+# proceedure
+#ScanIntervalDiscovery=
+#ScanWindowDiscovery=
+
+# LE scanning parameters used for passive scanning supporting the advertisement
+# monitor Apis
+#ScanIntervalAdvMonitor=
+#ScanWindowAdvMonitor=
+
+# LE scanning parameters used for connection establishment.
+#ScanIntervalConnect=
+#ScanWindowConnect=
+
+# LE default connection parameters.  These values are superceeded by any
+# specific values provided via the Load Connection Parameters interface
+#MinConnectionInterval=
+#MaxConnectionInterval=
+#ConnectionLatency=
+#ConnectionSupervisionTimeout=
+#Autoconnecttimeout=
+
+# Scan duration during interleaving scan. Only used when scanning for ADV
+# monitors. The units are msec.
+# Default: 300
+#AdvMonAllowlistScanDuration=
+# Default: 500
+#AdvMonNoFilterScanDuration=
+
+# Enable/Disable Advertisement Monitor interleave scan for power saving.
+# 0: disable
+# 1: enable
+# Defaults to 1
+#EnableAdvMonInterleaveScan=
+
+[GATT]
+# GATT attribute cache.
+# Possible values:
+# always: Always cache attributes even for devices not paired, this is
+# recommended as it is best for interoperability, with more consistent
+# reconnection times and enables proper tracking of notifications for all
+# devices.
+# yes: Only cache attributes of paired devices.
+# no: Never cache attributes
+# Default: always
+#Cache = always
+
+# Minimum required Encryption Key Size for accessing secured characteristics.
+# Possible values: 0 and 7-16. 0 means don't care.
+# Defaults to 0
+#KeySize = 0
+
+# Exchange MTU size.
+# Possible values: 23-517
+# Defaults to 517
+#ExchangeMTU = 517
+
+# Number of ATT channels
+# Possible values: 1-5 (1 disables EATT)
+# Default to 3
+#Channels = 3
+
+[AVDTP]
+# AVDTP L2CAP Signalling Channel Mode.
+# Possible values:
+# basic: Use L2CAP Basic Mode
+# ertm: Use L2CAP Enhanced Retransmission Mode
+#SessionMode = basic
+
+# AVDTP L2CAP Transport Channel Mode.
+# Possible values:
+# basic: Use L2CAP Basic Mode
+# streaming: Use L2CAP Streaming Mode
+#StreamMode = basic
+
+[Policy]
+#
+# The ReconnectUUIDs defines the set of remote services that should try
+# to be reconnected to in case of a link loss (link supervision
+# timeout). The policy plugin should contain a sane set of values by
+# default, but this list can be overridden here. By setting the list to
+# empty the reconnection feature gets disabled.
+#ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb,0000111f-0000-1000-8000-00805f9b34fb,0000110a-0000-1000-8000-00805f9b34fb,0000110b-0000-1000-8000-00805f9b34fb
+
+# ReconnectAttempts define the number of attempts to reconnect after a link
+# lost. Setting the value to 0 disables reconnecting feature.
+#ReconnectAttempts=7
+
+# ReconnectIntervals define the set of intervals in seconds to use in between
+# attempts.
+# If the number of attempts defined in ReconnectAttempts is bigger than the
+# set of intervals the last interval is repeated until the last attempt.
+#ReconnectIntervals=1,2,4,8,16,32,64
+
+# AutoEnable defines option to enable all controllers when they are found.
+# This includes adapters present on start as well as adapters that are plugged
+# in later on. Defaults to 'false'.
+#AutoEnable=false
+
+# Audio devices that were disconnected due to suspend will be reconnected on
+# resume. ResumeDelay determines the delay between when the controller
+# resumes from suspend and a connection attempt is made. A longer delay is
+# better for better co-existence with Wi-Fi.
+# The value is in seconds.
+# Default: 2
+#ResumeDelay = 2
+
+[AdvMon]
+# Default RSSI Sampling Period. This is used when a client registers an
+# advertisement monitor and leaves the RSSISamplingPeriod unset.
+# Default: 0
+#RSSISamplingPeriod=0

overlays/nemomobile/etc/lightdm/lightdm.conf

+[LightDM]
+run-directory=/run/lightdm
+
+[Seat:*]
+user-session=nemomobile
+session-wrapper=/etc/lightdm/Xsession
\ No newline at end of file

overlays/nemomobile/etc/systemd/logind.conf

+#  This file is part of systemd.
+#
+#  systemd is free software; you can redistribute it and/or modify it
+#  under the terms of the GNU Lesser General Public License as published by
+#  the Free Software Foundation; either version 2.1 of the License, or
+#  (at your option) any later version.
+#
+# Entries in this file show the compile time defaults.
+# You can change settings by editing this file.
+# Defaults can be restored by simply deleting this file.
+#
+# See logind.conf(5) for details.
+
+[Login]
+#NAutoVTs=6
+#ReserveVT=6
+#KillUserProcesses=no
+#KillOnlyUsers=
+#KillExcludeUsers=root
+#InhibitDelayMaxSec=5
+HandlePowerKey=ignore
+#HandleSuspendKey=suspend
+#HandleHibernateKey=hibernate
+#HandleLidSwitch=suspend
+#HandleLidSwitchExternalPower=suspend
+#HandleLidSwitchDocked=ignore
+#PowerKeyIgnoreInhibited=no
+#SuspendKeyIgnoreInhibited=no
+#HibernateKeyIgnoreInhibited=no
+#LidSwitchIgnoreInhibited=yes
+#HoldoffTimeoutSec=30s
+#IdleAction=ignore
+#IdleActionSec=30min
+#RuntimeDirectorySize=10%
+#RemoveIPC=yes
+#InhibitorsMax=8192
+#SessionsMax=8192

overlays/nemomobile/etc/systemd/system/user@.service.d/local.conf

+[Service]
+Environment="QT_QPA_PLATFORM=wayland"
+Environment="QT_QUICK_CONTROLS_MOBILE=1"
+Environment="QT_WAYLAND_DISABLE_WINDOWDECORATION=1"
+Environment="MALIIT_FORCE_DBUS_CONNECTION=1"
\ No newline at end of file

overlays/nemomobile/etc/xprofile

+test -f $HOME/.config/locale.conf && source $HOME/.config/locale.conf

overlays/nemomobile/overlay.txt

+Overlay
\ No newline at end of file

overlays/nemomobile/usr/share/lightdm/lightdm.conf.d/50-lightdm-autologin.conf

+[Seat:*]
+autologin-user=manjaro
+autologin-user-timeout=0

overlays/phosh/etc/profile.d/gtk-app-wayland.sh

-#!/bin/sh
-
-# Most pure GTK3 apps use wayland by default, but some,
-# like Firefox, need the backend to be explicitely selected.
-export GDK_BACKEND=wayland

overlays/phosh/etc/skel/.config/gtk-3.0/gtk.css

+/* TWEAKS-START phosh-applist-background */
+phosh-app-grid {
+	background-image: url("file:///usr/share/wallpapers/manjaro_blurr_darker.jpg");
+	background-size: cover;
+	background-position: center;
+}
+/* TWEAKS-END phosh-applist-background */
+/* Phosh-Next package the ui file got renamed to carousel */
+phosh-app-carousel {
+	background-image: url("file:///usr/share/wallpapers/manjaro_blurr_darker.jpg");
+	background-size: cover;
+	background-position: center;
+}
+/* TWEAKS-START phosh-lockscreen-background */
+phosh-lockscreen, .phosh-lockshield {
+	background-image: url("file:///usr/share/wallpapers/manjaro_blurr_darker.jpg");
+	background-size: cover;
+	background-position: center;
+}
+/* TWEAKS-END phosh-lockscreen-background */

overlays/phosh/etc/systemd/system/phosh.service

-[Unit]
-Description=Phosh, a shell for mobile phones
-Documentation=https://source.puri.sm/Librem5/phosh
-
-# Make sure we are started after logins are permitted.
-After=systemd-user-sessions.service
-# If Plymouth is used, we want to start when it is on its way out.
-After=plymouth-quit-wait.service
-
-# D-Bus is necessary for contacting logind. Logind is required.
-Wants=dbus.socket
-After=dbus.socket
-
-# This scope is created by pam_systemd when logging in as the user.
-# This directive is a workaround to a systemd bug, where the setup of the
-# user session by PAM has some race condition, possibly leading to a failure.
-# See README for more details.
-After=session-c1.scope
-
-# Since we are part of the graphical session, make sure we are started before
-# it is complete.
-Before=graphical.target
-
-# Prevent starting on systems without virtual consoles
-ConditionPathExists=/dev/tty0
-
-[Service]
-Environment=LANG=C.UTF-8
-ExecStart=/usr/bin/phosh
-TimeoutStartSec=30
-User=manjaro
-PAMName=login
-WorkingDirectory=/home/manjaro
-Restart=on-failure
-RestartSec=5s
-
-# A virtual terminal is needed.
-TTYPath=/dev/tty7
-TTYReset=yes
-TTYVHangup=yes
-TTYVTDisallocate=yes
-
-# Fail to start if not controlling the tty.
-StandardInput=tty-fail
-StandardOutput=journal
-StandardError=journal
-
-# Log this user with utmp, letting it show up with commands 'w' and 'who'.
-UtmpIdentifier=tty7
-UtmpMode=user
-
-[Install]
-WantedBy=graphical.target

overlays/phosh/etc/systemd/system/phosh.service.bak

-[Unit]
-Description=Launch Phosh.
-
-[Service]
-Type=simple
-ExecStart=/usr/bin/phosh
-
-[Install]
-WantedBy=graphical.target

overlays/phosh/etc/systemd/system/phosh.service.d/override.conf.bak

-[Service]
-User=manjaro
-WorkingDirectory=/home/manjaro

overlays/phosh/usr/share/glib-2.0/schemas/000-gschema.override

-[org.gnome.desktop.background]
-picture-uri='file:///usr/share/wallpapers/manjaro.jpg'
-
-[org.gnome.desktop.interface]
-clock-show-weekday=true
-clock-show-date=true
-
-[org.gnome.desktop.wm.preferences]
-button-layout='appmenu:'
-
-[org.gnome.Epiphany]
-search-engines=[('Search the Web', 'https://duckduckgo.com/?q=%s&t=epiphany', ''), ('DuckDuckGo', 'https://duckduckgo.com/?q=%s&t=epiphany', '!ddg'), ('Qwant', 'https://www.qwant.com/?q=%s', '!q')]
-
-[org.gnome.Epiphany.web]
-mobile-user-agent=true
-user-agent='Mozilla/5.0 (postmarketOS device, like iPhone; X11; Linux x86_64) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/13.0 Safari/605.1.15 Epiphany/605.1.15'
-
-[org.gnome.settings-daemon.plugins.power]
-sleep-inactive-ac-type='nothing'

overlays/plasma-mobile-dev/etc/skel/.config/kdeglobals

-[General]
-ColorScheme=Breeze
-Name=Breeze
-shadeSortColumn=true
-widgetStyle=Breeze
-
-[Icons]
-Theme=breeze
-
-[KDE]
-ColorScheme=Breeze
-contrast=4
-widgetStyle=Breeze

overlays/plasma-mobile-dev/etc/skel/.config/plasma-org.kde.plasma.phone-appletsrc

-[Containments][1]
-Favorites=org.kde.phone.dialer.desktop,org.kde.mobile.angelfish.desktop,org.kde.phone.calindori.desktop,org.kde.mobile.camera.desktop
-MaxFavoriteCount=4
-formfactor=0
-immutability=1
-lastScreen=0
-location=0
-plugin=org.kde.phone.homescreen
-wallpaperplugin=org.kde.image
-
-[Containments][1][Wallpaper][org.kde.image][General]
-Image=file:///usr/share/wallpapers/manjaro-arm/generic/manjaro-arm.png
-
-[Containments][2]
-activityId=
-formfactor=2
-immutability=1
-lastScreen=0
-location=3
-plugin=org.kde.phone.panel
-wallpaperplugin=org.kde.image
-
-[Containments][2][Applets][3]
-immutability=1
-plugin=org.kde.plasma.notifications
-
-[Containments][2][Applets][3][Configuration]
-PreloadWeight=70
-
-[Containments][2][Applets][4]
-immutability=1
-plugin=org.kde.plasma.mediacontroller
-
-[Containments][2][Applets][4][Configuration]
-PreloadWeight=70
-
-[Containments][5]
-activityId=
-formfactor=2
-immutability=1
-lastScreen=0
-location=4
-plugin=org.kde.phone.taskpanel
-wallpaperplugin=org.kde.image

overlays/plasma-mobile-dev/etc/skel/.config/plasmarc

-[Theme]
-name=breeze

overlays/plasma-mobile-dev/etc/xdg/kdeglobals

-[KDE] 
-StartDragDist=40
-
-[Icons]
-Theme=breeze
-
-[General]
-BrowserApplication[$e]=!angelfish
-ColorScheme=Breeze
-Name=Breeze
-XftHintStyle=
-XftSubPixel=none
-shadeSortColumn=true
-
-[KDE]
-LookAndFeelPackage=org.kde.plasma.phone
-
-[QtQuickRendererSettings]
-RenderLoop=basic

overlays/plasma-mobile/etc/sddm.conf

-[Autologin]
-# Whether sddm should automatically log back into sessions when they exit
-Relogin=false
-
-# Name of session file for autologin session (if empty try last logged in)
-Session=plasma-mobile.desktop
-
-# Username for autologin session
-User=manjaro
-
-[General]
-# Halt command
-HaltCommand=/usr/bin/systemctl poweroff
-
-# Input method module
-InputMethod=
-
-# Initial NumLock state. Can be on, off or none.
-# If property is set to none, numlock won't be changed
-# NOTE: Currently ignored if autologin is enabled.
-Numlock=none
-RebootCommand=/usr/bin/systemctl reboot
-
-[Theme]
-# Current theme name
-Current=matcha-dynamic-sddm
-
-# Cursor theme used in the greeter
-CursorTheme=breeze_cursors
-
-# Number of users to use as threshold
-# above which avatars are disabled
-# unless explicitly enabled with EnableAvatars
-DisableAvatarsThreshold=7
-
-# Enable display of custom user avatars
-EnableAvatars=true
-
-# Global directory for user avatars
-# The files should be named <username>.face.icon
-FacesDir=/usr/share/sddm/faces
-
-# Theme directory path
-ThemeDir=/usr/share/sddm/themes
-
-
-[Users]
-# Default $PATH for logged in users
-DefaultPath=/usr/local/sbin:/usr/local/bin:/usr/bin
-
-# Comma-separated list of shells.
-# Users with these shells as their default won't be listed
-HideShells=
-
-# Comma-separated list of users that should not be listed
-HideUsers=
-
-# Maximum user id for displayed users
-MaximumUid=60000
-
-# Minimum user id for displayed users
-MinimumUid=1000
-
-# Remember the session of the last successfully logged in user
-RememberLastSession=true
-
-# Remember the last successfully logged in user
-RememberLastUser=true
-
-# When logging in as the same user twice, restore the original session, rather than create a new one
-ReuseSession=false
-
-
-[Wayland]
-# Enable Qt's automatic high-DPI scaling
-EnableHiDPI=false
-
-# Path to a script to execute when starting the desktop session
-SessionCommand=/usr/share/sddm/scripts/wayland-session
-
-# Directory containing available Wayland sessions
-SessionDir=/usr/share/wayland-sessions
-
-# Path to the user session log file
-SessionLogFile=.local/share/sddm/wayland-session.log
-
-
-[X11]
-# Path to a script to execute when starting the display server
-DisplayCommand=/usr/share/sddm/scripts/Xsetup
-
-# Path to a script to execute when stopping the display server
-DisplayStopCommand=/usr/share/sddm/scripts/Xstop
-
-# Enable Qt's automatic high-DPI scaling
-EnableHiDPI=false
-
-# The lowest virtual terminal number that will be used.
-MinimumVT=1
-
-# Arguments passed to the X server invocation
-ServerArguments=-nolisten tcp
-
-# Path to X server binary
-ServerPath=/usr/bin/X
-
-# Path to a script to execute when starting the desktop session
-SessionCommand=/usr/share/sddm/scripts/Xsession
-
-# Directory containing available X sessions
-SessionDir=/usr/share/xsessions
-
-# Path to the user session log file
-SessionLogFile=.local/share/sddm/xorg-session.log
-
-# Path to the Xauthority file
-UserAuthFile=.Xauthority
-
-# Path to xauth binary
-XauthPath=/usr/bin/xauth
-
-# Path to Xephyr binary
-XephyrPath=/usr/bin/Xephyr
-