From 1254db248fce4e2cf05a01c1c8df3b79745424c0 Mon Sep 17 00:00:00 2001 From: Jerome Brunet <jbrunet@baylibre.com> Date: Thu, 16 May 2019 17:13:38 +0200 Subject: [PATCH] dt-bindings: pinctrl: meson: add output support in pinconf add support for the pinconf DT property output-enable, output-disable, output-low and output-high in the meson pinctrl driver. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- .../devicetree/bindings/pinctrl/meson,pinctrl.txt | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt index a7618605bf1ef..10dc4f7176ca1 100644 --- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt @@ -47,9 +47,15 @@ Required properties for pinmux nodes are: Required properties for configuration nodes: - pins: a list of pin names -Configuration nodes support the generic properties "bias-disable", -"bias-pull-up" and "bias-pull-down", described in file -pinctrl-bindings.txt +Configuration nodes support the following generic properties, as +described in file pinctrl-bindings.txt: + - "bias-disable" + - "bias-pull-up" + - "bias-pull-down" + - "output-enable" + - "output-disable" + - "output-low" + - "output-high" Optional properties : - drive-strength-microamp: Drive strength for the specified pins in uA. -- GitLab