diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index cbaf06f2f78e25abf993dead9ecebba23b8b2b2b..eb917462b219b996ba7ca3a7680a8f36347d225a 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -36,8 +36,8 @@ gpio_fan {
 		compatible = "gpio-fan";
 		pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
 		pinctrl-names = "default";
-		gpios = <&gpio1 14 GPIO_ACTIVE_LOW
-			 &gpio1 13 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
+			 &gpio1 13 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0    0
 				      3000 1
 				      6000 2>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 29ea7e81ec4c88b9063a364bb8c35549ab1279a0..329f8ceeebea1427b13c41b45bec8bea4ed22f73 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -183,7 +183,7 @@ &cp0_pcie0 {
 	pinctrl-0 = <&cp0_pcie_pins>;
 	num-lanes = <4>;
 	num-viewport = <8>;
-	reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 7d94c1fa592a064d2d42709ce9d6a198ef008eb6..7f799cb5668e2eac0cd1b39d7f471c3bb6cc5b9a 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -28,6 +28,23 @@ psci {
 		method = "smc";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * This area matches the mapping done with a
+		 * mainline U-Boot, and should be updated by the
+		 * bootloader.
+		 */
+
+		psci-area@4000000 {
+			reg = <0x0 0x4000000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
 	ap806 {
 		#address-cells = <2>;
 		#size-cells = <2>;