diff --git a/include/linux/log2.h b/include/linux/log2.h
index 1aec01365ed4548b87dd1dfec93fc441bcf73576..83a4a3ca3e8a76f4a80b8740bd8f82b2d68fae59 100644
--- a/include/linux/log2.h
+++ b/include/linux/log2.h
@@ -220,4 +220,38 @@ int __order_base_2(unsigned long n)
 		ilog2((n) - 1) + 1) :		\
 	__order_base_2(n)			\
 )
+
+static inline __attribute__((const))
+int __bits_per(unsigned long n)
+{
+	if (n < 2)
+		return 1;
+	if (is_power_of_2(n))
+		return order_base_2(n) + 1;
+	return order_base_2(n);
+}
+
+/**
+ * bits_per - calculate the number of bits required for the argument
+ * @n: parameter
+ *
+ * This is constant-capable and can be used for compile time
+ * initializations, e.g bitfields.
+ *
+ * The first few values calculated by this routine:
+ * bf(0) = 1
+ * bf(1) = 1
+ * bf(2) = 2
+ * bf(3) = 2
+ * bf(4) = 3
+ * ... and so on.
+ */
+#define bits_per(n)				\
+(						\
+	__builtin_constant_p(n) ? (		\
+		((n) == 0 || (n) == 1)		\
+			? 1 : ilog2(n) + 1	\
+	) :					\
+	__bits_per(n)				\
+)
 #endif /* _LINUX_LOG2_H */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 044c023875e88ef2c2a3da08ea64e8eb79a90d3f..80235bcd05f262a6f71bc37a71d2b5703c89f9e0 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -283,6 +283,18 @@ struct vtime {
 	u64			gtime;
 };
 
+/*
+ * Utilization clamp constraints.
+ * @UCLAMP_MIN:	Minimum utilization
+ * @UCLAMP_MAX:	Maximum utilization
+ * @UCLAMP_CNT:	Utilization clamp constraints count
+ */
+enum uclamp_id {
+	UCLAMP_MIN = 0,
+	UCLAMP_MAX,
+	UCLAMP_CNT
+};
+
 struct sched_info {
 #ifdef CONFIG_SCHED_INFO
 	/* Cumulative counters: */
@@ -314,6 +326,10 @@ struct sched_info {
 # define SCHED_FIXEDPOINT_SHIFT		10
 # define SCHED_FIXEDPOINT_SCALE		(1L << SCHED_FIXEDPOINT_SHIFT)
 
+/* Increase resolution of cpu_capacity calculations */
+# define SCHED_CAPACITY_SHIFT		SCHED_FIXEDPOINT_SHIFT
+# define SCHED_CAPACITY_SCALE		(1L << SCHED_CAPACITY_SHIFT)
+
 struct load_weight {
 	unsigned long			weight;
 	u32				inv_weight;
@@ -562,6 +578,25 @@ struct sched_dl_entity {
 	struct hrtimer inactive_timer;
 };
 
+#ifdef CONFIG_UCLAMP_TASK
+/* Number of utilization clamp buckets (shorter alias) */
+#define UCLAMP_BUCKETS CONFIG_UCLAMP_BUCKETS_COUNT
+
+/*
+ * Utilization clamp for a scheduling entity
+ * @value:		clamp value "assigned" to a se
+ * @bucket_id:		bucket index corresponding to the "assigned" value
+ *
+ * The bucket_id is the index of the clamp bucket matching the clamp value
+ * which is pre-computed and stored to avoid expensive integer divisions from
+ * the fast path.
+ */
+struct uclamp_se {
+	unsigned int value		: bits_per(SCHED_CAPACITY_SCALE);
+	unsigned int bucket_id		: bits_per(UCLAMP_BUCKETS);
+};
+#endif /* CONFIG_UCLAMP_TASK */
+
 union rcu_special {
 	struct {
 		u8			blocked;
@@ -642,6 +677,10 @@ struct task_struct {
 #endif
 	struct sched_dl_entity		dl;
 
+#ifdef CONFIG_UCLAMP_TASK
+	struct uclamp_se		uclamp[UCLAMP_CNT];
+#endif
+
 #ifdef CONFIG_PREEMPT_NOTIFIERS
 	/* List of struct preempt_notifier: */
 	struct hlist_head		preempt_notifiers;
diff --git a/include/linux/sched/topology.h b/include/linux/sched/topology.h
index e445d3767cddb191c9fe1591408b07a87846ca19..7863bb62d2ab1543f3bea336bcb3e156c9414afa 100644
--- a/include/linux/sched/topology.h
+++ b/include/linux/sched/topology.h
@@ -6,12 +6,6 @@
 
 #include <linux/sched/idle.h>
 
-/*
- * Increase resolution of cpu_capacity calculations
- */
-#define SCHED_CAPACITY_SHIFT	SCHED_FIXEDPOINT_SHIFT
-#define SCHED_CAPACITY_SCALE	(1L << SCHED_CAPACITY_SHIFT)
-
 /*
  * sched-domains (multiprocessor balancing) declarations:
  */
diff --git a/init/Kconfig b/init/Kconfig
index 0e2344389501ec0f9516951f62cc5332b87b5045..c88289c18d5928ea35c9f975334693288d6d0ad5 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -677,6 +677,59 @@ config HAVE_UNSTABLE_SCHED_CLOCK
 config GENERIC_SCHED_CLOCK
 	bool
 
+menu "Scheduler features"
+
+config UCLAMP_TASK
+	bool "Enable utilization clamping for RT/FAIR tasks"
+	depends on CPU_FREQ_GOV_SCHEDUTIL
+	help
+	  This feature enables the scheduler to track the clamped utilization
+	  of each CPU based on RUNNABLE tasks scheduled on that CPU.
+
+	  With this option, the user can specify the min and max CPU
+	  utilization allowed for RUNNABLE tasks. The max utilization defines
+	  the maximum frequency a task should use while the min utilization
+	  defines the minimum frequency it should use.
+
+	  Both min and max utilization clamp values are hints to the scheduler,
+	  aiming at improving its frequency selection policy, but they do not
+	  enforce or grant any specific bandwidth for tasks.
+
+	  If in doubt, say N.
+
+config UCLAMP_BUCKETS_COUNT
+	int "Number of supported utilization clamp buckets"
+	range 5 20
+	default 5
+	depends on UCLAMP_TASK
+	help
+	  Defines the number of clamp buckets to use. The range of each bucket
+	  will be SCHED_CAPACITY_SCALE/UCLAMP_BUCKETS_COUNT. The higher the
+	  number of clamp buckets the finer their granularity and the higher
+	  the precision of clamping aggregation and tracking at run-time.
+
+	  For example, with the minimum configuration value we will have 5
+	  clamp buckets tracking 20% utilization each. A 25% boosted tasks will
+	  be refcounted in the [20..39]% bucket and will set the bucket clamp
+	  effective value to 25%.
+	  If a second 30% boosted task should be co-scheduled on the same CPU,
+	  that task will be refcounted in the same bucket of the first task and
+	  it will boost the bucket clamp effective value to 30%.
+	  The clamp effective value of a bucket is reset to its nominal value
+	  (20% in the example above) when there are no more tasks refcounted in
+	  that bucket.
+
+	  An additional boost/capping margin can be added to some tasks. In the
+	  example above the 25% task will be boosted to 30% until it exits the
+	  CPU. If that should be considered not acceptable on certain systems,
+	  it's always possible to reduce the margin by increasing the number of
+	  clamp buckets to trade off used memory for run-time tracking
+	  precision.
+
+	  If in doubt, use the default value.
+
+endmenu
+
 #
 # For architectures that want to enable the support for NUMA-affine scheduler
 # balancing logic:
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index e5e02d23e693da3fb07e53d763d3bb8a82a1d517..d8c1e67afd825fd313f6adcf51fb0081de625be9 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -772,6 +772,168 @@ static void set_load_weight(struct task_struct *p, bool update_load)
 	}
 }
 
+#ifdef CONFIG_UCLAMP_TASK
+
+/* Integer rounded range for each bucket */
+#define UCLAMP_BUCKET_DELTA DIV_ROUND_CLOSEST(SCHED_CAPACITY_SCALE, UCLAMP_BUCKETS)
+
+#define for_each_clamp_id(clamp_id) \
+	for ((clamp_id) = 0; (clamp_id) < UCLAMP_CNT; (clamp_id)++)
+
+static inline unsigned int uclamp_bucket_id(unsigned int clamp_value)
+{
+	return clamp_value / UCLAMP_BUCKET_DELTA;
+}
+
+static inline unsigned int uclamp_none(int clamp_id)
+{
+	if (clamp_id == UCLAMP_MIN)
+		return 0;
+	return SCHED_CAPACITY_SCALE;
+}
+
+static inline void uclamp_se_set(struct uclamp_se *uc_se, unsigned int value)
+{
+	uc_se->value = value;
+	uc_se->bucket_id = uclamp_bucket_id(value);
+}
+
+static inline
+unsigned int uclamp_rq_max_value(struct rq *rq, unsigned int clamp_id)
+{
+	struct uclamp_bucket *bucket = rq->uclamp[clamp_id].bucket;
+	int bucket_id = UCLAMP_BUCKETS - 1;
+
+	/*
+	 * Since both min and max clamps are max aggregated, find the
+	 * top most bucket with tasks in.
+	 */
+	for ( ; bucket_id >= 0; bucket_id--) {
+		if (!bucket[bucket_id].tasks)
+			continue;
+		return bucket[bucket_id].value;
+	}
+
+	/* No tasks -- default clamp values */
+	return uclamp_none(clamp_id);
+}
+
+/*
+ * When a task is enqueued on a rq, the clamp bucket currently defined by the
+ * task's uclamp::bucket_id is refcounted on that rq. This also immediately
+ * updates the rq's clamp value if required.
+ */
+static inline void uclamp_rq_inc_id(struct rq *rq, struct task_struct *p,
+				    unsigned int clamp_id)
+{
+	struct uclamp_rq *uc_rq = &rq->uclamp[clamp_id];
+	struct uclamp_se *uc_se = &p->uclamp[clamp_id];
+	struct uclamp_bucket *bucket;
+
+	lockdep_assert_held(&rq->lock);
+
+	bucket = &uc_rq->bucket[uc_se->bucket_id];
+	bucket->tasks++;
+
+	if (uc_se->value > READ_ONCE(uc_rq->value))
+		WRITE_ONCE(uc_rq->value, bucket->value);
+}
+
+/*
+ * When a task is dequeued from a rq, the clamp bucket refcounted by the task
+ * is released. If this is the last task reference counting the rq's max
+ * active clamp value, then the rq's clamp value is updated.
+ *
+ * Both refcounted tasks and rq's cached clamp values are expected to be
+ * always valid. If it's detected they are not, as defensive programming,
+ * enforce the expected state and warn.
+ */
+static inline void uclamp_rq_dec_id(struct rq *rq, struct task_struct *p,
+				    unsigned int clamp_id)
+{
+	struct uclamp_rq *uc_rq = &rq->uclamp[clamp_id];
+	struct uclamp_se *uc_se = &p->uclamp[clamp_id];
+	struct uclamp_bucket *bucket;
+	unsigned int rq_clamp;
+
+	lockdep_assert_held(&rq->lock);
+
+	bucket = &uc_rq->bucket[uc_se->bucket_id];
+	SCHED_WARN_ON(!bucket->tasks);
+	if (likely(bucket->tasks))
+		bucket->tasks--;
+
+	if (likely(bucket->tasks))
+		return;
+
+	rq_clamp = READ_ONCE(uc_rq->value);
+	/*
+	 * Defensive programming: this should never happen. If it happens,
+	 * e.g. due to future modification, warn and fixup the expected value.
+	 */
+	SCHED_WARN_ON(bucket->value > rq_clamp);
+	if (bucket->value >= rq_clamp)
+		WRITE_ONCE(uc_rq->value, uclamp_rq_max_value(rq, clamp_id));
+}
+
+static inline void uclamp_rq_inc(struct rq *rq, struct task_struct *p)
+{
+	unsigned int clamp_id;
+
+	if (unlikely(!p->sched_class->uclamp_enabled))
+		return;
+
+	for_each_clamp_id(clamp_id)
+		uclamp_rq_inc_id(rq, p, clamp_id);
+}
+
+static inline void uclamp_rq_dec(struct rq *rq, struct task_struct *p)
+{
+	unsigned int clamp_id;
+
+	if (unlikely(!p->sched_class->uclamp_enabled))
+		return;
+
+	for_each_clamp_id(clamp_id)
+		uclamp_rq_dec_id(rq, p, clamp_id);
+}
+
+static void __init init_uclamp(void)
+{
+	unsigned int clamp_id;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		struct uclamp_bucket *bucket;
+		struct uclamp_rq *uc_rq;
+		unsigned int bucket_id;
+
+		memset(&cpu_rq(cpu)->uclamp, 0, sizeof(struct uclamp_rq));
+
+		for_each_clamp_id(clamp_id) {
+			uc_rq = &cpu_rq(cpu)->uclamp[clamp_id];
+
+			bucket_id = 1;
+			while (bucket_id < UCLAMP_BUCKETS) {
+				bucket = &uc_rq->bucket[bucket_id];
+				bucket->value = bucket_id * UCLAMP_BUCKET_DELTA;
+				++bucket_id;
+			}
+		}
+	}
+
+	for_each_clamp_id(clamp_id) {
+		uclamp_se_set(&init_task.uclamp[clamp_id],
+			      uclamp_none(clamp_id));
+	}
+}
+
+#else /* CONFIG_UCLAMP_TASK */
+static inline void uclamp_rq_inc(struct rq *rq, struct task_struct *p) { }
+static inline void uclamp_rq_dec(struct rq *rq, struct task_struct *p) { }
+static inline void init_uclamp(void) { }
+#endif /* CONFIG_UCLAMP_TASK */
+
 static inline void enqueue_task(struct rq *rq, struct task_struct *p, int flags)
 {
 	if (!(flags & ENQUEUE_NOCLOCK))
@@ -782,6 +944,7 @@ static inline void enqueue_task(struct rq *rq, struct task_struct *p, int flags)
 		psi_enqueue(p, flags & ENQUEUE_WAKEUP);
 	}
 
+	uclamp_rq_inc(rq, p);
 	p->sched_class->enqueue_task(rq, p, flags);
 }
 
@@ -795,6 +958,7 @@ static inline void dequeue_task(struct rq *rq, struct task_struct *p, int flags)
 		psi_dequeue(p, flags & DEQUEUE_SLEEP);
 	}
 
+	uclamp_rq_dec(rq, p);
 	p->sched_class->dequeue_task(rq, p, flags);
 }
 
@@ -6093,6 +6257,8 @@ void __init sched_init(void)
 
 	psi_init();
 
+	init_uclamp();
+
 	scheduler_running = 1;
 }
 
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index e58ab597ec88ffcbd611db232391b4da21c22313..cecc6baaba9365c7b7c2678cb505d0ca9ab7bc90 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -791,6 +791,48 @@ extern void rto_push_irq_work_func(struct irq_work *work);
 #endif
 #endif /* CONFIG_SMP */
 
+#ifdef CONFIG_UCLAMP_TASK
+/*
+ * struct uclamp_bucket - Utilization clamp bucket
+ * @value: utilization clamp value for tasks on this clamp bucket
+ * @tasks: number of RUNNABLE tasks on this clamp bucket
+ *
+ * Keep track of how many tasks are RUNNABLE for a given utilization
+ * clamp value.
+ */
+struct uclamp_bucket {
+	unsigned long value : bits_per(SCHED_CAPACITY_SCALE);
+	unsigned long tasks : BITS_PER_LONG - bits_per(SCHED_CAPACITY_SCALE);
+};
+
+/*
+ * struct uclamp_rq - rq's utilization clamp
+ * @value: currently active clamp values for a rq
+ * @bucket: utilization clamp buckets affecting a rq
+ *
+ * Keep track of RUNNABLE tasks on a rq to aggregate their clamp values.
+ * A clamp value is affecting a rq when there is at least one task RUNNABLE
+ * (or actually running) with that value.
+ *
+ * There are up to UCLAMP_CNT possible different clamp values, currently there
+ * are only two: minimum utilization and maximum utilization.
+ *
+ * All utilization clamping values are MAX aggregated, since:
+ * - for util_min: we want to run the CPU at least at the max of the minimum
+ *   utilization required by its currently RUNNABLE tasks.
+ * - for util_max: we want to allow the CPU to run up to the max of the
+ *   maximum utilization allowed by its currently RUNNABLE tasks.
+ *
+ * Since on each system we expect only a limited number of different
+ * utilization clamp values (UCLAMP_BUCKETS), use a simple array to track
+ * the metrics required to compute all the per-rq utilization clamp values.
+ */
+struct uclamp_rq {
+	unsigned int value;
+	struct uclamp_bucket bucket[UCLAMP_BUCKETS];
+};
+#endif /* CONFIG_UCLAMP_TASK */
+
 /*
  * This is the main, per-CPU runqueue data structure.
  *
@@ -825,6 +867,11 @@ struct rq {
 	unsigned long		nr_load_updates;
 	u64			nr_switches;
 
+#ifdef CONFIG_UCLAMP_TASK
+	/* Utilization clamp values based on CPU's RUNNABLE tasks */
+	struct uclamp_rq	uclamp[UCLAMP_CNT] ____cacheline_aligned;
+#endif
+
 	struct cfs_rq		cfs;
 	struct rt_rq		rt;
 	struct dl_rq		dl;
@@ -1639,6 +1686,10 @@ extern const u32		sched_prio_to_wmult[40];
 struct sched_class {
 	const struct sched_class *next;
 
+#ifdef CONFIG_UCLAMP_TASK
+	int uclamp_enabled;
+#endif
+
 	void (*enqueue_task) (struct rq *rq, struct task_struct *p, int flags);
 	void (*dequeue_task) (struct rq *rq, struct task_struct *p, int flags);
 	void (*yield_task)   (struct rq *rq);