From 7c95a9d962f9ffdf02a3d82a6ae108c254a29122 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben.hutchings@codethink.co.uk>
Date: Tue, 24 Feb 2015 02:32:07 +0000
Subject: [PATCH] samples/pktgen: Add sample scripts for pktgen facility
These are Robert Olsson's samples which used to be available from
<ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/examples/>
but currently are not.
Change the documentation to refer to these consistently as 'sample
scripts', matching the directory name used here.
Cc: Robert Olsson <robert@herjulf.se>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
Documentation/networking/pktgen.txt | 12 ++--
samples/pktgen/pktgen.conf-1-1 | 66 ++++++++++++++++++++
samples/pktgen/pktgen.conf-1-1-flows | 74 ++++++++++++++++++++++
samples/pktgen/pktgen.conf-1-1-ip6 | 67 ++++++++++++++++++++
samples/pktgen/pktgen.conf-1-1-ip6-rdos | 70 +++++++++++++++++++++
samples/pktgen/pktgen.conf-1-1-rdos | 71 +++++++++++++++++++++
samples/pktgen/pktgen.conf-1-2 | 76 +++++++++++++++++++++++
samples/pktgen/pktgen.conf-2-1 | 72 ++++++++++++++++++++++
samples/pktgen/pktgen.conf-2-2 | 82 +++++++++++++++++++++++++
9 files changed, 584 insertions(+), 6 deletions(-)
create mode 100755 samples/pktgen/pktgen.conf-1-1
create mode 100755 samples/pktgen/pktgen.conf-1-1-flows
create mode 100755 samples/pktgen/pktgen.conf-1-1-ip6
create mode 100755 samples/pktgen/pktgen.conf-1-1-ip6-rdos
create mode 100755 samples/pktgen/pktgen.conf-1-1-rdos
create mode 100755 samples/pktgen/pktgen.conf-1-2
create mode 100755 samples/pktgen/pktgen.conf-2-1
create mode 100755 samples/pktgen/pktgen.conf-2-2
diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt
index fa0ad87e6597d..24c6dc100e024 100644
--- a/Documentation/networking/pktgen.txt
+++ b/Documentation/networking/pktgen.txt
@@ -92,8 +92,8 @@ Result: OK: 13101142(c12220741+d880401) usec, 10000000 (60byte,0frags)
Configuring threads and devices
================================
-This is done via the /proc interface, and most easily done via pgset in
-the scripts.
+This is done via the /proc interface, and most easily done via pgset
+as defined in the sample scripts.
Examples:
@@ -192,11 +192,11 @@ Examples:
pgset "rate 300M" set rate to 300 Mb/s
pgset "ratep 1000000" set rate to 1Mpps
-Example scripts
-===============
+Sample scripts
+==============
-A collection of small tutorial scripts for pktgen is in the examples
-directory:
+A collection of small tutorial scripts for pktgen is in the
+samples/pktgen directory:
pktgen.conf-1-1 # 1 CPU 1 dev
pktgen.conf-1-2 # 1 CPU 2 dev
diff --git a/samples/pktgen/pktgen.conf-1-1 b/samples/pktgen/pktgen.conf-1-1
new file mode 100755
index 0000000000000..5d30f836ca3ee
--- /dev/null
+++ b/samples/pktgen/pktgen.conf-1-1
@@ -0,0 +1,66 @@
+#! /bin/sh
+
+#modprobe pktgen
+
+
+function pgset() {
+ local result
+
+ echo $1 > $PGDEV
+
+ result=`cat $PGDEV | fgrep "Result: OK:"`
+ if [ "$result" = "" ]; then
+ cat $PGDEV | fgrep Result:
+ fi
+}
+
+function pg() {
+ echo inject > $PGDEV
+ cat $PGDEV
+}
+
+# Config Start Here -----------------------------------------------------------
+
+
+# thread config
+# Each CPU has own thread. Two CPU exammple. We add eth1, eth2 respectivly.
+
+PGDEV=/proc/net/pktgen/kpktgend_0
+ echo "Removing all devices"
+ pgset "rem_device_all"
+ echo "Adding eth1"
+ pgset "add_device eth1"
+ echo "Setting max_before_softirq 10000"
+ pgset "max_before_softirq 10000"
+
+
+# device config
+# delay 0 means maximum speed.
+
+CLONE_SKB="clone_skb 1000000"
+# NIC adds 4 bytes CRC
+PKT_SIZE="pkt_size 60"
+
+# COUNT 0 means forever
+#COUNT="count 0"
+COUNT="count 10000000"
+DELAY="delay 0"
+
+PGDEV=/proc/net/pktgen/eth1
+ echo "Configuring $PGDEV"
+ pgset "$COUNT"
+ pgset "$CLONE_SKB"
+ pgset "$PKT_SIZE"
+ pgset "$DELAY"
+ pgset "dst 10.10.11.2"
+ pgset "dst_mac 00:04:23:08:91:dc"
+
+
+# Time to run
+PGDEV=/proc/net/pktgen/pgctrl
+
+ echo "Running... ctrl^C to stop"
+ pgset "start"
+ echo "Done"
+
+# Result can be vieved in /proc/net/pktgen/eth1
diff --git a/samples/pktgen/pktgen.conf-1-1-flows b/samples/pktgen/pktgen.conf-1-1-flows
new file mode 100755
index 0000000000000..88a01b7d35310
--- /dev/null
+++ b/samples/pktgen/pktgen.conf-1-1-flows
@@ -0,0 +1,74 @@
+#! /bin/sh
+
+#modprobe pktgen
+
+
+function pgset() {
+ local result
+
+ echo $1 > $PGDEV
+
+ result=`cat $PGDEV | fgrep "Result: OK:"`
+ if [ "$result" = "" ]; then
+ cat $PGDEV | fgrep Result:
+ fi
+}
+
+function pg() {
+ echo inject > $PGDEV
+ cat $PGDEV
+}
+
+# Config Start Here -----------------------------------------------------------
+
+
+# thread config
+# Each CPU has own thread. Two CPU exammple. We add eth1, eth2 respectivly.
+
+PGDEV=/proc/net/pktgen/kpktgend_0
+ echo "Removing all devices"
+ pgset "rem_device_all"
+ echo "Adding eth1"
+ pgset "add_device eth1"
+ echo "Setting max_before_softirq 10000"
+ pgset "max_before_softirq 10000"
+
+
+# device config
+# delay 0
+# We need to do alloc for every skb since we cannot clone here.
+
+CLONE_SKB="clone_skb 0"
+# NIC adds 4 bytes CRC
+PKT_SIZE="pkt_size 60"
+
+# COUNT 0 means forever
+#COUNT="count 0"
+COUNT="count 10000000"
+DELAY="delay 0"
+
+PGDEV=/proc/net/pktgen/eth1
+ echo "Configuring $PGDEV"
+ pgset "$COUNT"
+ pgset "$CLONE_SKB"
+ pgset "$PKT_SIZE"
+ pgset "$DELAY"
+ # Random address with in the min-max range
+ pgset "flag IPDST_RND"
+ pgset "dst_min 10.0.0.0"
+ pgset "dst_max 10.255.255.255"
+
+ # 8k Concurrent flows at 4 pkts
+ pgset "flows 8192"
+ pgset "flowlen 4"
+
+ pgset "dst_mac 00:04:23:08:91:dc"
+
+# Time to run
+PGDEV=/proc/net/pktgen/pgctrl
+
+ echo "Running... ctrl^C to stop"
+ pgset "start"
+ echo "Done"
+
+# Result can be vieved in /proc/net/pktgen/eth1
diff --git a/samples/pktgen/pktgen.conf-1-1-ip6 b/samples/pktgen/pktgen.conf-1-1-ip6
new file mode 100755
index 0000000000000..752f112bd9e66
--- /dev/null
+++ b/samples/pktgen/pktgen.conf-1-1-ip6
@@ -0,0 +1,67 @@
+#! /bin/sh
+
+#modprobe pktgen
+
+
+function pgset() {
+ local result
+
+ echo $1 > $PGDEV
+
+ result=`cat $PGDEV | fgrep "Result: OK:"`
+ if [ "$result" = "" ]; then
+ cat $PGDEV | fgrep Result:
+ fi
+}
+
+function pg() {
+ echo inject > $PGDEV
+ cat $PGDEV
+}
+
+# Config Start Here -----------------------------------------------------------
+
+
+# thread config
+# Each CPU has own thread. Two CPU exammple. We add eth1, eth2 respectivly.
+# IPv6. Note increase in minimal packet length
+
+PGDEV=/proc/net/pktgen/kpktgend_0
+ echo "Removing all devices"
+ pgset "rem_device_all"
+ echo "Adding eth1"
+ pgset "add_device eth1"
+ echo "Setting max_before_softirq 10000"
+ pgset "max_before_softirq 10000"
+
+
+# device config
+# delay 0
+
+CLONE_SKB="clone_skb 1000000"
+# NIC adds 4 bytes CRC
+PKT_SIZE="pkt_size 66"
+
+# COUNT 0 means forever
+#COUNT="count 0"
+COUNT="count 10000000"
+DELAY="delay 0"
+
+PGDEV=/proc/net/pktgen/eth1
+ echo "Configuring $PGDEV"
+ pgset "$COUNT"
+ pgset "$CLONE_SKB"
+ pgset "$PKT_SIZE"
+ pgset "$DELAY"
+ pgset "dst6 fec0::1"
+ pgset "src6 fec0::2"
+ pgset "dst_mac 00:04:23:08:91:dc"
+
+# Time to run
+PGDEV=/proc/net/pktgen/pgctrl
+
+ echo "Running... ctrl^C to stop"
+ pgset "start"
+ echo "Done"
+
+# Result can be vieved in /proc/net/pktgen/eth1
diff --git a/samples/pktgen/pktgen.conf-1-1-ip6-rdos b/samples/pktgen/pktgen.conf-1-1-ip6-rdos
new file mode 100755
index 0000000000000..fd364277e43f2
--- /dev/null
+++ b/samples/pktgen/pktgen.conf-1-1-ip6-rdos
@@ -0,0 +1,70 @@
+#! /bin/sh
+
+#modprobe pktgen
+
+
+function pgset() {
+ local result
+
+ echo $1 > $PGDEV
+
+ result=`cat $PGDEV | fgrep "Result: OK:"`
+ if [ "$result" = "" ]; then
+ cat $PGDEV | fgrep Result:
+ fi
+}
+
+function pg() {
+ echo inject > $PGDEV
+ cat $PGDEV
+}
+
+# Config Start Here -----------------------------------------------------------
+
+
+# thread config
+# Each CPU has own thread. Two CPU exammple. We add eth1, eth2 respectivly.
+# IPv6. Note increase in minimal packet length
+
+PGDEV=/proc/net/pktgen/kpktgend_0
+ echo "Removing all devices"
+ pgset "rem_device_all"
+ echo "Adding eth1"
+ pgset "add_device eth1"
+ echo "Setting max_before_softirq 10000"
+ pgset "max_before_softirq 10000"
+
+
+# device config
+# delay 0 means maximum speed.
+
+# We need to do alloc for every skb since we cannot clone here.
+CLONE_SKB="clone_skb 0"
+
+# NIC adds 4 bytes CRC
+PKT_SIZE="pkt_size 66"
+
+# COUNT 0 means forever
+#COUNT="count 0"
+COUNT="count 10000000"
+DELAY="delay 0"
+
+PGDEV=/proc/net/pktgen/eth1
+ echo "Configuring $PGDEV"
+ pgset "$COUNT"
+ pgset "$CLONE_SKB"
+ pgset "$PKT_SIZE"
+ pgset "$DELAY"
+ pgset "dst6_min fec0::1"
+ pgset "dst6_max fec0::FFFF:FFFF"
+
+ pgset "dst_mac 00:04:23:08:91:dc"
+
+# Time to run
+PGDEV=/proc/net/pktgen/pgctrl
+
+ echo "Running... ctrl^C to stop"
+ pgset "start"
+ echo "Done"
+
+# Result can be vieved in /proc/net/pktgen/eth1
diff --git a/samples/pktgen/pktgen.conf-1-1-rdos b/samples/pktgen/pktgen.conf-1-1-rdos
new file mode 100755
index 0000000000000..bc81fa3192433
--- /dev/null
+++ b/samples/pktgen/pktgen.conf-1-1-rdos
@@ -0,0 +1,71 @@
+#! /bin/sh
+
+#modprobe pktgen
+
+
+function pgset() {
+ local result
+
+ echo $1 > $PGDEV
+
+ result=`cat $PGDEV | fgrep "Result: OK:"`
+ if [ "$result" = "" ]; then
+ cat $PGDEV | fgrep Result:
+ fi
+}
+
+function pg() {
+ echo inject > $PGDEV
+ cat $PGDEV
+}
+
+# Config Start Here -----------------------------------------------------------
+
+
+# thread config
+# Each CPU has own thread. Two CPU exammple. We add eth1, eth2 respectivly.
+
+PGDEV=/proc/net/pktgen/kpktgend_0
+ echo "Removing all devices"
+ pgset "rem_device_all"
+ echo "Adding eth1"
+ pgset "add_device eth1"
+ echo "Setting max_before_softirq 10000"
+ pgset "max_before_softirq 10000"
+
+
+# device config
+# delay 0
+
+# We need to do alloc for every skb since we cannot clone here.
+
+CLONE_SKB="clone_skb 0"
+# NIC adds 4 bytes CRC
+PKT_SIZE="pkt_size 60"
+
+# COUNT 0 means forever
+#COUNT="count 0"
+COUNT="count 10000000"
+DELAY="delay 0"
+
+PGDEV=/proc/net/pktgen/eth1
+ echo "Configuring $PGDEV"
+ pgset "$COUNT"
+ pgset "$CLONE_SKB"
+ pgset "$PKT_SIZE"
+ pgset "$DELAY"
+ # Random address with in the min-max range
+ pgset "flag IPDST_RND"
+ pgset "dst_min 10.0.0.0"
+ pgset "dst_max 10.255.255.255"
+
+ pgset "dst_mac 00:04:23:08:91:dc"
+
+# Time to run
+PGDEV=/proc/net/pktgen/pgctrl
+
+ echo "Running... ctrl^C to stop"
+ pgset "start"
+ echo "Done"
+
+# Result can be vieved in /proc/net/pktgen/eth1
diff --git a/samples/pktgen/pktgen.conf-1-2 b/samples/pktgen/pktgen.conf-1-2
new file mode 100755
index 0000000000000..f99b886738608
--- /dev/null
+++ b/samples/pktgen/pktgen.conf-1-2
@@ -0,0 +1,76 @@
+#! /bin/sh
+
+#modprobe pktgen
+
+
+function pgset() {
+ local result
+
+ echo $1 > $PGDEV
+
+ result=`cat $PGDEV | fgrep "Result: OK:"`
+ if [ "$result" = "" ]; then
+ cat $PGDEV | fgrep Result:
+ fi
+}
+
+function pg() {
+ echo inject > $PGDEV
+ cat $PGDEV
+}
+
+# Config Start Here -----------------------------------------------------------
+
+
+# thread config
+# One CPU means one thread. One CPU exammple. We add eth1, eth2 respectivly.
+
+PGDEV=/proc/net/pktgen/kpktgend_0
+ echo "Removing all devices"
+ pgset "rem_device_all"
+ echo "Adding eth1"
+ pgset "add_device eth1"
+ echo "Adding eth2"
+ pgset "add_device eth2"
+ echo "Setting max_before_softirq 10000"
+ pgset "max_before_softirq 10000"
+
+
+# device config
+# delay 0 means maximum speed.
+
+CLONE_SKB="clone_skb 1000000"
+# NIC adds 4 bytes CRC
+PKT_SIZE="pkt_size 60"
+
+# COUNT 0 means forever
+#COUNT="count 0"
+COUNT="count 10000000"
+DELAY="delay 0"
+
+PGDEV=/proc/net/pktgen/eth1
+ echo "Configuring $PGDEV"
+ pgset "$COUNT"
+ pgset "$CLONE_SKB"
+ pgset "$PKT_SIZE"
+ pgset "$DELAY"
+ pgset "dst 10.10.11.2"
+ pgset "dst_mac 00:04:23:08:91:dc"
+
+PGDEV=/proc/net/pktgen/eth2
+ echo "Configuring $PGDEV"
+ pgset "$COUNT"
+ pgset "$CLONE_SKB"
+ pgset "$PKT_SIZE"
+ pgset "$DELAY"
+ pgset "dst 192.168.2.2"
+ pgset "dst_mac 00:04:23:08:91:de"
+
+# Time to run
+PGDEV=/proc/net/pktgen/pgctrl
+
+ echo "Running... ctrl^C to stop"
+ pgset "start"
+ echo "Done"
+
+# Result can be vieved in /proc/net/pktgen/eth[1,2]
diff --git a/samples/pktgen/pktgen.conf-2-1 b/samples/pktgen/pktgen.conf-2-1
new file mode 100755
index 0000000000000..845d7bf1609ab
--- /dev/null
+++ b/samples/pktgen/pktgen.conf-2-1
@@ -0,0 +1,72 @@
+#! /bin/sh
+
+#modprobe pktgen
+
+
+function pgset() {
+ local result
+
+ echo $1 > $PGDEV
+
+ result=`cat $PGDEV | fgrep "Result: OK:"`
+ if [ "$result" = "" ]; then
+ cat $PGDEV | fgrep Result:
+ fi
+}
+
+function pg() {
+ echo inject > $PGDEV
+ cat $PGDEV
+}
+
+# Config Start Here -----------------------------------------------------------
+
+
+# thread config
+# Each CPU has own thread. Two CPU exammple. We add eth1, eth2 respectivly.
+
+PGDEV=/proc/net/pktgen/kpktgend_0
+ echo "Removing all devices"
+ pgset "rem_device_all"
+ echo "Adding eth1"
+ pgset "add_device eth1"
+ echo "Setting max_before_softirq 10000"
+ pgset "max_before_softirq 10000"
+
+# We need to remove old config since we dont use this thread. We can only
+# one NIC on one CPU due to affinity reasons.
+
+PGDEV=/proc/net/pktgen/kpktgend_1
+ echo "Removing all devices"
+ pgset "rem_device_all"
+
+# device config
+# delay 0 means maximum speed.
+
+CLONE_SKB="clone_skb 1000000"
+# NIC adds 4 bytes CRC
+PKT_SIZE="pkt_size 60"
+
+# COUNT 0 means forever
+#COUNT="count 0"
+COUNT="count 10000000"
+DELAY="delay 0"
+
+PGDEV=/proc/net/pktgen/eth1
+ echo "Configuring $PGDEV"
+ pgset "$COUNT"
+ pgset "$CLONE_SKB"
+ pgset "$PKT_SIZE"
+ pgset "$DELAY"
+ pgset "dst 10.10.11.2"
+ pgset "dst_mac 00:04:23:08:91:dc"
+
+
+# Time to run
+PGDEV=/proc/net/pktgen/pgctrl
+
+ echo "Running... ctrl^C to stop"
+ pgset "start"
+ echo "Done"
+
+# Result can be vieved in /proc/net/pktgen/eth1
diff --git a/samples/pktgen/pktgen.conf-2-2 b/samples/pktgen/pktgen.conf-2-2
new file mode 100755
index 0000000000000..7ce86470a3a94
--- /dev/null
+++ b/samples/pktgen/pktgen.conf-2-2
@@ -0,0 +1,82 @@
+#! /bin/sh
+
+#modprobe pktgen
+
+
+function pgset() {
+ local result
+
+ echo $1 > $PGDEV
+
+ result=`cat $PGDEV | fgrep "Result: OK:"`
+ if [ "$result" = "" ]; then
+ cat $PGDEV | fgrep Result:
+ fi
+}
+
+function pg() {
+ echo inject > $PGDEV
+ cat $PGDEV
+}
+
+# Config Start Here -----------------------------------------------------------
+
+
+# thread config
+# Each CPU has own thread. Two CPU exammple. We add eth1, eth2 respectivly.
+
+PGDEV=/proc/net/pktgen/kpktgend_0
+ echo "Removing all devices"
+ pgset "rem_device_all"
+ echo "Adding eth1"
+ pgset "add_device eth1"
+ echo "Setting max_before_softirq 10000"
+ pgset "max_before_softirq 10000"
+
+PGDEV=/proc/net/pktgen/kpktgend_1
+ echo "Removing all devices"
+ pgset "rem_device_all"
+ echo "Adding eth2"
+ pgset "add_device eth2"
+ echo "Setting max_before_softirq 10000"
+ pgset "max_before_softirq 10000"
+
+
+# device config
+# delay 0 means maximum speed.
+
+CLONE_SKB="clone_skb 1000000"
+# NIC adds 4 bytes CRC
+PKT_SIZE="pkt_size 60"
+
+# COUNT 0 means forever
+#COUNT="count 0"
+COUNT="count 10000000"
+DELAY="delay 0"
+
+PGDEV=/proc/net/pktgen/eth1
+ echo "Configuring $PGDEV"
+ pgset "$COUNT"
+ pgset "$CLONE_SKB"
+ pgset "$PKT_SIZE"
+ pgset "$DELAY"
+ pgset "dst 10.10.11.2"
+ pgset "dst_mac 00:04:23:08:91:dc"
+
+PGDEV=/proc/net/pktgen/eth2
+ echo "Configuring $PGDEV"
+ pgset "$COUNT"
+ pgset "$CLONE_SKB"
+ pgset "$PKT_SIZE"
+ pgset "$DELAY"
+ pgset "dst 192.168.2.2"
+ pgset "dst_mac 00:04:23:08:91:de"
+
+# Time to run
+PGDEV=/proc/net/pktgen/pgctrl
+
+ echo "Running... ctrl^C to stop"
+ pgset "start"
+ echo "Done"
+
+# Result can be vieved in /proc/net/pktgen/eth[1,2]
--
GitLab