diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b1b27525b24d675440843a43e9ce0293ac4df0b8..a91009c6187062253579d0324292ade00ea2241c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -589,6 +589,7 @@ config ARCH_ORION5X
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell Orion 5x series SoCs:
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f2ab4ea7cc0ee19c5863a1c57fd0ac9c6142a9cc..581cb081cb0f04586f98e8b10bdf1e095a3b65a0 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -44,6 +44,8 @@ intc: interrupt-controller@1 {
compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
+ ti,intc-size = <96>;
+ reg = <0x480FE000 0x1000>;
};
uart1: serial@4806a000 {
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index 2222c57395198f6535d49cc8a2122e756cbba7b2..b0d3cc49269def6d8ab668af574fd8341ec5aca8 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -20,9 +20,6 @@
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index e1d2c6def5e66acf865d7618ff0b709bdf180f70..f261cd2426434aac74e2856c6069c9052d6f035f 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -159,6 +159,7 @@ static struct clk __init *clk_register_gate_fn(struct device *dev,
gate_fn->gate.flags = clk_gate_flags;
gate_fn->gate.lock = lock;
gate_fn->gate.hw.init = &init;
+ gate_fn->fn = fn;
/* ops is the gate ops, but with our disable function */
if (clk_gate_fn_ops.disable != clk_gate_fn_disable) {
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 3eee37a3b501a81e594fed45997301ae27f67ce4..a115142f8690bedf3bde2f10ad6f868b400a85dd 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -38,6 +38,7 @@
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
#define L2_WRITETHROUGH 0x00000010
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index fede3d503efa0ef505b910494b4c96b5a9fa496d..c5b68510776b71c75c2731fcf5253a4114597c30 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -80,6 +80,7 @@
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000)
#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000)
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 8ca14e88a31af12f43d219fe6d8a6b63b61ec4f1..2c5d0ed75285153d8126e60a030f08630a277635 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -83,11 +83,9 @@ static struct musb_hdrc_config musb_config = {
};
static struct musb_hdrc_platform_data tusb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
- .mode = MUSB_PERIPHERAL,
-#else /* defined(CONFIG_USB_MUSB_HOST) */
+#else
.mode = MUSB_HOST,
#endif
.set_power = tusb_set_power,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 79c6909eeb785ef24d71be68f076034c0cd476df..580fd17208dacc24dd51bbff63507763c0612730 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -81,13 +81,13 @@ static u8 omap3_beagle_version;
static struct {
int mmc1_gpio_wp;
int usb_pwr_level;
- int reset_gpio;
+ int dvi_pd_gpio;
int usr_button_gpio;
int mmc_caps;
} beagle_config = {
.mmc1_gpio_wp = -EINVAL,
.usb_pwr_level = GPIOF_OUT_INIT_LOW,
- .reset_gpio = 129,
+ .dvi_pd_gpio = -EINVAL,
.usr_button_gpio = 4,
.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
};
@@ -126,21 +126,21 @@ static void __init omap3_beagle_init_rev(void)
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
beagle_config.mmc1_gpio_wp = 29;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 6:
printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
beagle_config.mmc1_gpio_wp = 23;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 5:
printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
beagle_config.mmc1_gpio_wp = 23;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 0:
@@ -274,11 +274,9 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (r)
pr_err("%s: unable to configure nDVI_PWR_EN\n",
__func__);
- r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
- "DVI_LDO_EN");
- if (r)
- pr_err("%s: unable to configure DVI_LDO_EN\n",
- __func__);
+
+ beagle_config.dvi_pd_gpio = gpio + 2;
+
} else {
/*
* REVISIT: need ehci-omap hooks for external VBUS
@@ -287,7 +285,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
- dvi_panel.power_down_gpio = beagle_config.reset_gpio;
+ dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
@@ -499,7 +497,7 @@ static void __init omap3_beagle_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
- if (beagle_config.mmc1_gpio_wp != -EINVAL)
+ if (gpio_is_valid(beagle_config.mmc1_gpio_wp))
omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
mmc[0].caps = beagle_config.mmc_caps;
omap_hsmmc_init(mmc);
@@ -510,15 +508,13 @@ static void __init omap3_beagle_init(void)
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
+ if (gpio_is_valid(beagle_config.dvi_pd_gpio))
+ omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
omap_display_init(&beagle_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
- omap_mux_init_gpio(170, OMAP_PIN_INPUT);
- /* REVISIT leave DVI powered down until it's needed ... */
- gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
-
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 2172f660384889535c6d812dae30dacf56b18eec..e2b701e164f64c1a3117690a8363b1dc6b0041fe 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -84,6 +84,7 @@ static struct clk slimbus_clk = {
static struct clk sys_32k_ck = {
.name = "sys_32k_ck",
+ .clkdm_name = "prm_clkdm",
.rate = 32768,
.ops = &clkops_null,
};
@@ -512,6 +513,7 @@ static struct clk ddrphy_ck = {
.name = "ddrphy_ck",
.parent = &dpll_core_m2_ck,
.ops = &clkops_null,
+ .clkdm_name = "l3_emif_clkdm",
.fixed_div = 2,
.recalc = &omap_fixed_divisor_recalc,
};
@@ -769,6 +771,7 @@ static const struct clksel dpll_mpu_m2_div[] = {
static struct clk dpll_mpu_m2_ck = {
.name = "dpll_mpu_m2_ck",
.parent = &dpll_mpu_ck,
+ .clkdm_name = "cm_clkdm",
.clksel = dpll_mpu_m2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
@@ -1149,6 +1152,7 @@ static const struct clksel l3_div_div[] = {
static struct clk l3_div_ck = {
.name = "l3_div_ck",
.parent = &div_core_ck,
+ .clkdm_name = "cm_clkdm",
.clksel = l3_div_div,
.clksel_reg = OMAP4430_CM_CLKSEL_CORE,
.clksel_mask = OMAP4430_CLKSEL_L3_MASK,
@@ -2824,6 +2828,7 @@ static const struct clksel trace_clk_div_div[] = {
static struct clk trace_clk_div_ck = {
.name = "trace_clk_div_ck",
.parent = &pmd_trace_clk_mux_ck,
+ .clkdm_name = "emu_sys_clkdm",
.clksel = trace_clk_div_div,
.clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
.clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index a7bc096bd407445ed8e248c6c9803435ddc406eb..f24e3f7a2bbc248389ac234c4b80e9f2ef4d5e03 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -22,4 +22,15 @@
*/
#define MAX_MODULE_READY_TIME 2000
+/*
+ * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
+ * the PRCM to request that a module enter the inactive state in the
+ * case of OMAP2 & 3. In the case of OMAP4 this is the max duration
+ * in microseconds for the module to reach the inactive state from
+ * a functional state.
+ * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during
+ * kernel init.
+ */
+#define MAX_MODULE_DISABLE_TIME 5000
+
#endif
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 8c86d294b1a326b6ea8bbf07239cb92983ba5f50..1a39945d9ff81fd5ed9a78f785c6fe08d3f1f939 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -313,9 +313,9 @@ int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_off
omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
- MAX_MODULE_READY_TIME, i);
+ MAX_MODULE_DISABLE_TIME, i);
- return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+ return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY;
}
/**
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 4b46b91cca5c73a8075c8c8421b59d1a4467b533..9fe6829f4c16f2dd0837862f5f4254ecba98230b 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -41,6 +41,7 @@
#include "control.h"
#include "mux.h"
#include "prm.h"
+#include "common.h"
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
#define OMAP_MUX_BASE_SZ 0x5ca
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index bf86f7e8f91f5837869cb1b799f2b59ab4a81395..773193670ea265cefa67f938fa780e938400dbce 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -530,7 +530,7 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
- _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
+ _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v);
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 950454a3fa314da4448c99eeaaf50f81201b382b..f30e861ce6d9cf42c76d90cb78cfcc90cf99f31b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -393,8 +393,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0004,
.sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO),
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -854,6 +853,11 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
.name = "dss_hdmi",
.class = &omap44xx_hdmi_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
+ /*
+ * HDMI audio requires to use no-idle mode. Hence,
+ * set idle mode by software.
+ */
+ .flags = HWMOD_SWSUP_SIDLE,
.mpu_irqs = omap44xx_dss_hdmi_irqs,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
.main_clk = "dss_48mhz_clk",
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index 4c90477e6f82a91c5c4ddf140cd02cb718f69fc7..d52651a05daa6ce0686ec32a4915e17c8fdc9919 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -239,21 +239,15 @@ void am35x_set_mode(u8 musb_mode)
devconf2 &= ~CONF2_OTGMODE;
switch (musb_mode) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
devconf2 |= CONF2_FORCE_HOST;
break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
devconf2 |= CONF2_FORCE_DEVICE;
break;
-#endif
-#ifdef CONFIG_USB_MUSB_OTG
case MUSB_OTG: /* Don't override the VBUS/ID comparators */
devconf2 |= CONF2_NO_OVERRIDE;
break;
-#endif
default:
pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
}
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index b19d1b43c12e59ef678debd195225c52f97e1e5a..c4a576856661014ea3bec9acc70f80e32d62c33b 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -41,12 +41,10 @@ static struct musb_hdrc_config musb_config = {
};
static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+#else
.mode = MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
- .mode = MUSB_PERIPHERAL,
#endif
/* .clock is set dynamically */
.config = &musb_config,
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index db84a46ce7fd6da27ca899d3fcf326cae0a3ee79..805bea6edf1711adf0de68e8f68318bdd4c44b80 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -300,7 +300,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
printk(error, 3, status);
return status;
}
- tusb_resources[2].start = irq + IH_GPIO_BASE;
+ tusb_resources[2].start = gpio_to_irq(irq);
/* set up memory timings ... can speed them up later */
if (!ps_refclk) {
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index 96484bcd34ca66bf441cde80c8735cb591c29b40..11a3c1e9801f4bea759d6deb3ec9179b019c3650 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -35,5 +35,5 @@
#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204)
#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
+#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300)
#endif
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
new file mode 100644
index 0000000000000000000000000000000000000000..1aa5d0a50a0b239b9da6f3cbb76bc8b4b0cdfca0
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <mach/orion5x.h>
+#include <asm/sizes.h>
+
+#define IO_SPACE_LIMIT SZ_2M
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a) __io(a)
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 2745f5d95b3fe085a30e6c6c6c11c6c6c5ec687b..683e085ce1624088f7ec138c1c4fa14c636a2ddd 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -82,6 +82,7 @@
#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000)
#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 4d6a2ee99c3b37df6a57e186cc0530da08e6ec98..5beb7ebe2948ff1e706159bf958e9118b3906f7e 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -33,7 +33,7 @@
static bool is_enabled;
-static void tegra_cpu_reset_handler_enable(void)
+static void __init tegra_cpu_reset_handler_enable(void)
{
void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
void __iomem *evp_cpu_reset =
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 62ec5c452792706407922b5ea0173009f6247622..706b7e29397f5ebfc87a5de092eb4fd330a635ba 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -461,6 +461,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused)
struct clk *c;
struct clk *pa;
+ mutex_lock(&clocks_mutex);
seq_printf(s, "%-30s %-30s %-10s %s\n",
"clock-name", "parent-name", "rate", "use-count");
@@ -469,6 +470,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused)
seq_printf(s, "%-30s %-30s %-10lu %d\n",
c->name, pa ? pa->name : "none", c->rate, c->usecount);
}
+ mutex_unlock(&clocks_mutex);
return 0;
}
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 61fd837624a8532dc38e13a078d1d83941afc1d8..c1793786aea989de24668d31529f1d22eb1e7012 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -582,7 +582,7 @@ void __init orion_spi_1_init(unsigned long mapbase)
* Watchdog
****************************************************************************/
static struct resource orion_wdt_resource =
- DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
+ DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28);
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",