diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 11254644911b5316e736afaffe08444bdf9ee234..ad48f52967fe43b3b5fe10af355746fb64780965 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -498,6 +498,7 @@ struct i40e_vsi {
*/
u16 rx_itr_setting;
u16 tx_itr_setting;
+ u16 int_rate_limit; /* value in usecs */
u16 rss_table_size;
u16 rss_size;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index cb88e7abfe8d0e6b3870d6131e052a48bafbdf75..1a5006806b468d05a31958bd3efd5d4b9fae5d99 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1845,6 +1845,14 @@ static int i40e_get_coalesce(struct net_device *netdev,
ec->rx_coalesce_usecs = vsi->rx_itr_setting & ~I40E_ITR_DYNAMIC;
ec->tx_coalesce_usecs = vsi->tx_itr_setting & ~I40E_ITR_DYNAMIC;
+ /* we use the _usecs_high to store/set the interrupt rate limit
+ * that the hardware supports, that almost but not quite
+ * fits the original intent of the ethtool variable,
+ * the rx_coalesce_usecs_high limits total interrupts
+ * per second from both tx/rx sources.
+ */
+ ec->rx_coalesce_usecs_high = vsi->int_rate_limit;
+ ec->tx_coalesce_usecs_high = vsi->int_rate_limit;
return 0;
}
@@ -1863,6 +1871,17 @@ static int i40e_set_coalesce(struct net_device *netdev,
if (ec->tx_max_coalesced_frames_irq || ec->rx_max_coalesced_frames_irq)
vsi->work_limit = ec->tx_max_coalesced_frames_irq;
+ /* tx_coalesce_usecs_high is ignored, use rx-usecs-high instead */
+ if (ec->tx_coalesce_usecs_high != vsi->int_rate_limit) {
+ netif_info(pf, drv, netdev, "tx-usecs-high is not used, please program rx-usecs-high\n");
+ return -EINVAL;
+ }
+
+ if (ec->rx_coalesce_usecs_high >= INTRL_REG_TO_USEC(I40E_MAX_INTRL)) {
+ netif_info(pf, drv, netdev, "Invalid value, rx-usecs-high range is 0-235\n");
+ return -EINVAL;
+ }
+
vector = vsi->base_vector;
if ((ec->rx_coalesce_usecs >= (I40E_MIN_ITR << 1)) &&
(ec->rx_coalesce_usecs <= (I40E_MAX_ITR << 1))) {
@@ -1876,6 +1895,8 @@ static int i40e_set_coalesce(struct net_device *netdev,
return -EINVAL;
}
+ vsi->int_rate_limit = ec->rx_coalesce_usecs_high;
+
if ((ec->tx_coalesce_usecs >= (I40E_MIN_ITR << 1)) &&
(ec->tx_coalesce_usecs <= (I40E_MAX_ITR << 1))) {
vsi->tx_itr_setting = ec->tx_coalesce_usecs;
@@ -1900,11 +1921,14 @@ static int i40e_set_coalesce(struct net_device *netdev,
vsi->tx_itr_setting &= ~I40E_ITR_DYNAMIC;
for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
+ u16 intrl = INTRL_USEC_TO_REG(vsi->int_rate_limit);
+
q_vector = vsi->q_vectors[i];
q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
wr32(hw, I40E_PFINT_ITRN(0, vector - 1), q_vector->rx.itr);
q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
wr32(hw, I40E_PFINT_ITRN(1, vector - 1), q_vector->tx.itr);
+ wr32(hw, I40E_PFINT_RATEN(vector - 1), intrl);
i40e_flush(hw);
}
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index d7310955bcc83ce6b9f14ac3ad7bfff5c0441cc9..722b0a1b33b8da66b971ad1201a49ea37019d69c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2901,11 +2901,9 @@ static int i40e_vsi_configure(struct i40e_vsi *vsi)
static void i40e_vsi_configure_msix(struct i40e_vsi *vsi)
{
struct i40e_pf *pf = vsi->back;
- struct i40e_q_vector *q_vector;
struct i40e_hw *hw = &pf->hw;
u16 vector;
int i, q;
- u32 val;
u32 qp;
/* The interrupt indexing is offset by 1 in the PFINT_ITRn
@@ -2915,7 +2913,8 @@ static void i40e_vsi_configure_msix(struct i40e_vsi *vsi)
qp = vsi->base_queue;
vector = vsi->base_vector;
for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
- q_vector = vsi->q_vectors[i];
+ struct i40e_q_vector *q_vector = vsi->q_vectors[i];
+
q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
q_vector->rx.latency_range = I40E_LOW_LATENCY;
wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1),
@@ -2924,10 +2923,14 @@ static void i40e_vsi_configure_msix(struct i40e_vsi *vsi)
q_vector->tx.latency_range = I40E_LOW_LATENCY;
wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1),
q_vector->tx.itr);
+ wr32(hw, I40E_PFINT_RATEN(vector - 1),
+ INTRL_USEC_TO_REG(vsi->int_rate_limit));
/* Linked list for the queuepairs assigned to this vector */
wr32(hw, I40E_PFINT_LNKLSTN(vector - 1), qp);
for (q = 0; q < q_vector->num_ringpairs; q++) {
+ u32 val;
+
val = I40E_QINT_RQCTL_CAUSE_ENA_MASK |
(I40E_RX_ITR << I40E_QINT_RQCTL_ITR_INDX_SHIFT) |
(vector << I40E_QINT_RQCTL_MSIX_INDX_SHIFT) |
@@ -7040,6 +7043,7 @@ static int i40e_vsi_mem_alloc(struct i40e_pf *pf, enum i40e_vsi_type type)
vsi->idx = vsi_idx;
vsi->rx_itr_setting = pf->rx_itr_default;
vsi->tx_itr_setting = pf->tx_itr_default;
+ vsi->int_rate_limit = 0;
vsi->rss_table_size = (vsi->type == I40E_VSI_MAIN) ?
pf->rss_table_size : 64;
vsi->netdev_registered = false;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
index 75cecfa6e3386ef721934149bd76c97803dfd008..7c0ed84b296d1f5c5a93d6c6aac28cc5de16a6f3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -35,6 +35,7 @@
#define I40E_ITR_20K 0x0019
#define I40E_ITR_8K 0x003E
#define I40E_ITR_4K 0x007A
+#define I40E_MAX_INTRL 0x3B /* reg uses 4 usec resolution */
#define I40E_ITR_RX_DEF I40E_ITR_8K
#define I40E_ITR_TX_DEF I40E_ITR_4K
#define I40E_ITR_DYNAMIC 0x8000 /* use top bit as a flag */
@@ -44,6 +45,15 @@
#define ITR_TO_REG(setting) ((setting & ~I40E_ITR_DYNAMIC) >> 1)
#define ITR_IS_DYNAMIC(setting) (!!(setting & I40E_ITR_DYNAMIC))
#define ITR_REG_TO_USEC(itr_reg) (itr_reg << 1)
+/* 0x40 is the enable bit for interrupt rate limiting, and must be set if
+ * the value of the rate limit is non-zero
+ */
+#define INTRL_ENA BIT(6)
+#define INTRL_REG_TO_USEC(intrl) ((intrl & ~INTRL_ENA) << 2)
+#define INTRL_USEC_TO_REG(set) ((set) ? ((set) >> 2) | INTRL_ENA : 0)
+#define I40E_INTRL_8K 125 /* 8000 ints/sec */
+#define I40E_INTRL_62K 16 /* 62500 ints/sec */
+#define I40E_INTRL_83K 12 /* 83333 ints/sec */
#define I40E_QUEUE_END_OF_LIST 0x7FF
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
index 0c13ece00366c8bb45fb1d645f73d539753ac689..c4f5a4eb2907923195cb259bcb72ee2f59ad940b 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
@@ -35,6 +35,7 @@
#define I40E_ITR_20K 0x0019
#define I40E_ITR_8K 0x003E
#define I40E_ITR_4K 0x007A
+#define I40E_MAX_INTRL 0x3B /* reg uses 4 usec resolution */
#define I40E_ITR_RX_DEF I40E_ITR_8K
#define I40E_ITR_TX_DEF I40E_ITR_4K
#define I40E_ITR_DYNAMIC 0x8000 /* use top bit as a flag */
@@ -44,6 +45,15 @@
#define ITR_TO_REG(setting) ((setting & ~I40E_ITR_DYNAMIC) >> 1)
#define ITR_IS_DYNAMIC(setting) (!!(setting & I40E_ITR_DYNAMIC))
#define ITR_REG_TO_USEC(itr_reg) (itr_reg << 1)
+/* 0x40 is the enable bit for interrupt rate limiting, and must be set if
+ * the value of the rate limit is non-zero
+ */
+#define INTRL_ENA BIT(6)
+#define INTRL_REG_TO_USEC(intrl) ((intrl & ~INTRL_ENA) << 2)
+#define INTRL_USEC_TO_REG(set) ((set) ? ((set) >> 2) | INTRL_ENA : 0)
+#define I40E_INTRL_8K 125 /* 8000 ints/sec */
+#define I40E_INTRL_62K 16 /* 62500 ints/sec */
+#define I40E_INTRL_83K 12 /* 83333 ints/sec */
#define I40E_QUEUE_END_OF_LIST 0x7FF