From bce9437a0a48dd5e19490f56e1cdc39a9be5563c Mon Sep 17 00:00:00 2001
From: Amelie Delaunay <amelie.delaunay@st.com>
Date: Fri, 28 Jun 2019 11:18:06 +0200
Subject: [PATCH] mtd: rawnand: stm32_fmc2: increase DMA completion timeouts
When the system is overloaded, DMA data transfer completion occurs after
100ms. Increase the timeouts to let it the time to complete.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 4aabea25cd7d1..e63acc077c18d 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -37,6 +37,8 @@
/* Max ECC buffer length */
#define FMC2_MAX_ECC_BUF_LEN (FMC2_BCHDSRS_LEN * FMC2_MAX_SG)
+#define FMC2_TIMEOUT_MS 1000
+
/* Timings */
#define FMC2_THIZ 1
#define FMC2_TIO 8000
@@ -530,7 +532,8 @@ static int stm32_fmc2_ham_calculate(struct nand_chip *chip, const u8 *data,
int ret;
ret = readl_relaxed_poll_timeout(fmc2->io_base + FMC2_SR,
- sr, sr & FMC2_SR_NWRF, 10, 1000);
+ sr, sr & FMC2_SR_NWRF, 10,
+ FMC2_TIMEOUT_MS);
if (ret) {
dev_err(fmc2->dev, "ham timeout\n");
return ret;
@@ -611,7 +614,7 @@ static int stm32_fmc2_bch_calculate(struct nand_chip *chip, const u8 *data,
/* Wait until the BCH code is ready */
if (!wait_for_completion_timeout(&fmc2->complete,
- msecs_to_jiffies(1000))) {
+ msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
dev_err(fmc2->dev, "bch timeout\n");
stm32_fmc2_disable_bch_irq(fmc2);
return -ETIMEDOUT;
@@ -696,7 +699,7 @@ static int stm32_fmc2_bch_correct(struct nand_chip *chip, u8 *dat,
/* Wait until the decoding error is ready */
if (!wait_for_completion_timeout(&fmc2->complete,
- msecs_to_jiffies(1000))) {
+ msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
dev_err(fmc2->dev, "bch timeout\n");
stm32_fmc2_disable_bch_irq(fmc2);
return -ETIMEDOUT;
@@ -969,7 +972,7 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
/* Wait end of sequencer transfer */
if (!wait_for_completion_timeout(&fmc2->complete,
- msecs_to_jiffies(1000))) {
+ msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
dev_err(fmc2->dev, "seq timeout\n");
stm32_fmc2_disable_seq_irq(fmc2);
dmaengine_terminate_all(dma_ch);
@@ -981,7 +984,7 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
/* Wait DMA data transfer completion */
if (!wait_for_completion_timeout(&fmc2->dma_data_complete,
- msecs_to_jiffies(100))) {
+ msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
dev_err(fmc2->dev, "data DMA timeout\n");
dmaengine_terminate_all(dma_ch);
ret = -ETIMEDOUT;
@@ -990,7 +993,7 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
/* Wait DMA ECC transfer completion */
if (!write_data && !raw) {
if (!wait_for_completion_timeout(&fmc2->dma_ecc_complete,
- msecs_to_jiffies(100))) {
+ msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
dev_err(fmc2->dev, "ECC DMA timeout\n");
dmaengine_terminate_all(fmc2->dma_ecc_ch);
ret = -ETIMEDOUT;
--
GitLab