diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
index 7f0cd72f47d2cfa1e6ae7b19720b0a8ac46b9ffb..699fd3c9ace8079e3fab036fcf01118f452998d0 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
@@ -17,17 +17,24 @@ Required properties for USART in SPI mode:
- cs-gpios: chipselects (internal cs not supported)
- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h)
+Optional properties in serial and SPI mode:
+- dma bindings for dma transfer:
+ - dmas: DMA specifier, consisting of a phandle to DMA controller node,
+ memory peripheral interface and USART DMA channel ID, FIFO configuration.
+ The order of DMA channels is fixed. The first DMA channel must be TX
+ associated channel and the second one must be RX associated channel.
+ Refer to dma.txt and atmel-dma.txt for details.
+ - dma-names: "tx" for TX channel.
+ "rx" for RX channel.
+ The order of dma-names is also fixed. The first name must be "tx"
+ and the second one must be "rx" as in the examples below.
+
Optional properties in serial mode:
- atmel,use-dma-rx: use of PDC or DMA for receiving data
- atmel,use-dma-tx: use of PDC or DMA for transmitting data
- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
It will use specified PIO instead of the peripheral function pin for the USART feature.
If unsure, don't specify this property.
-- add dma bindings for dma transfer:
- - dmas: DMA specifier, consisting of a phandle to DMA controller node,
- memory peripheral interface and USART DMA channel ID, FIFO configuration.
- Refer to dma.txt and atmel-dma.txt for details.
- - dma-names: "rx" for RX channel, "tx" for TX channel.
- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
capable USARTs.
- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
@@ -81,5 +88,8 @@ Example:
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&usart0_clk>;
clock-names = "usart";
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+ <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
cs-gpios = <&pioB 3 0>;
};
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..c374fd4923a670e97924c7270f34d0a6fd6918d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/allwinner,sun4i-a10-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 SPI Controller Device Tree Bindings
+
+allOf:
+ - $ref: "spi-controller.yaml"
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ "#address-cells": true
+ "#size-cells": true
+
+ compatible:
+ const: allwinner,sun4i-a10-spi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ items:
+ - const: ahb
+ - const: mod
+
+ dmas:
+ items:
+ - description: RX DMA Channel
+ - description: TX DMA Channel
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+ num-cs: true
+
+patternProperties:
+ "^.*@[0-9a-f]+":
+ properties:
+ reg:
+ items:
+ minimum: 0
+ maximum: 4
+
+ spi-rx-bus-width:
+ const: 1
+
+ spi-tx-bus-width:
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ spi1: spi@1c06000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c06000 0x1000>;
+ interrupts = <11>;
+ clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clock-names = "ahb", "mod";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..bda7a5befd8bb042636ac0dd5e4800e5eb69fdcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/allwinner,sun6i-a31-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 SPI Controller Device Tree Bindings
+
+allOf:
+ - $ref: "spi-controller.yaml"
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ "#address-cells": true
+ "#size-cells": true
+
+ compatible:
+ enum:
+ - allwinner,sun6i-a31-spi
+ - allwinner,sun8i-h3-spi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ items:
+ - const: ahb
+ - const: mod
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ items:
+ - description: RX DMA Channel
+ - description: TX DMA Channel
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+ num-cs: true
+
+patternProperties:
+ "^.*@[0-9a-f]+":
+ properties:
+ reg:
+ items:
+ minimum: 0
+ maximum: 4
+
+ spi-rx-bus-width:
+ const: 1
+
+ spi-tx-bus-width:
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ spi1: spi@1c69000 {
+ compatible = "allwinner,sun6i-a31-spi";
+ reg = <0x01c69000 0x1000>;
+ interrupts = <0 66 4>;
+ clocks = <&ahb1_gates 21>, <&spi1_clk>;
+ clock-names = "ahb", "mod";
+ resets = <&ahb1_rst 21>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ - |
+ spi0: spi@1c68000 {
+ compatible = "allwinner,sun8i-h3-spi";
+ reg = <0x01c68000 0x1000>;
+ interrupts = <0 65 4>;
+ clocks = <&ccu 30>, <&ccu 82>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 23>, <&dma 23>;
+ dma-names = "rx", "tx";
+ resets = <&ccu 15>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt
index 1f6e86f787efd229a7e02b1ba78dff1af3d43235..e07783505498014c6c146d7d11f5c2d0b3611fe3 100644
--- a/Documentation/devicetree/bindings/spi/spi-bus.txt
+++ b/Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -1,111 +1 @@
-SPI (Serial Peripheral Interface) busses
-
-SPI busses can be described with a node for the SPI controller device
-and a set of child nodes for each SPI slave on the bus. The system's SPI
-controller may be described for use in SPI master mode or in SPI slave mode,
-but not for both at the same time.
-
-The SPI controller node requires the following properties:
-- compatible - Name of SPI bus controller following generic names
- recommended practice.
-
-In master mode, the SPI controller node requires the following additional
-properties:
-- #address-cells - number of cells required to define a chip select
- address on the SPI bus.
-- #size-cells - should be zero.
-
-In slave mode, the SPI controller node requires one additional property:
-- spi-slave - Empty property.
-
-No other properties are required in the SPI bus node. It is assumed
-that a driver for an SPI bus device will understand that it is an SPI bus.
-However, the binding does not attempt to define the specific method for
-assigning chip select numbers. Since SPI chip select configuration is
-flexible and non-standardized, it is left out of this binding with the
-assumption that board specific platform code will be used to manage
-chip selects. Individual drivers can define additional properties to
-support describing the chip select layout.
-
-Optional properties (master mode only):
-- cs-gpios - gpios chip select.
-- num-cs - total number of chipselects.
-
-If cs-gpios is used the number of chip selects will be increased automatically
-with max(cs-gpios > hw cs).
-
-So if for example the controller has 2 CS lines, and the cs-gpios
-property looks like this:
-
-cs-gpios = <&gpio1 0 0>, <0>, <&gpio1 1 0>, <&gpio1 2 0>;
-
-Then it should be configured so that num_chipselect = 4 with the
-following mapping:
-
-cs0 : &gpio1 0 0
-cs1 : native
-cs2 : &gpio1 1 0
-cs3 : &gpio1 2 0
-
-
-SPI slave nodes must be children of the SPI controller node.
-
-In master mode, one or more slave nodes (up to the number of chip selects) can
-be present. Required properties are:
-- compatible - Name of SPI device following generic names recommended
- practice.
-- reg - Chip select address of device.
-- spi-max-frequency - Maximum SPI clocking speed of device in Hz.
-
-In slave mode, the (single) slave node is optional.
-If present, it must be called "slave". Required properties are:
-- compatible - Name of SPI device following generic names recommended
- practice.
-
-All slave nodes can contain the following optional properties:
-- spi-cpol - Empty property indicating device requires inverse clock
- polarity (CPOL) mode.
-- spi-cpha - Empty property indicating device requires shifted clock
- phase (CPHA) mode.
-- spi-cs-high - Empty property indicating device requires chip select
- active high.
-- spi-3wire - Empty property indicating device requires 3-wire mode.
-- spi-lsb-first - Empty property indicating device requires LSB first mode.
-- spi-tx-bus-width - The bus width (number of data wires) that is used for MOSI.
- Defaults to 1 if not present.
-- spi-rx-bus-width - The bus width (number of data wires) that is used for MISO.
- Defaults to 1 if not present.
-- spi-rx-delay-us - Microsecond delay after a read transfer.
-- spi-tx-delay-us - Microsecond delay after a write transfer.
-
-Some SPI controllers and devices support Dual and Quad SPI transfer mode.
-It allows data in the SPI system to be transferred using 2 wires (DUAL) or 4
-wires (QUAD).
-Now the value that spi-tx-bus-width and spi-rx-bus-width can receive is
-only 1 (SINGLE), 2 (DUAL) and 4 (QUAD).
-Dual/Quad mode is not allowed when 3-wire mode is used.
-
-If a gpio chipselect is used for the SPI slave the gpio number will be passed
-via the SPI master node cs-gpios property.
-
-SPI example for an MPC5200 SPI bus:
- spi@f00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
- reg = <0xf00 0x20>;
- interrupts = <2 13 0 2 14 0>;
- interrupt-parent = <&mpc5200_pic>;
-
- ethernet-switch@0 {
- compatible = "micrel,ks8995m";
- spi-max-frequency = <1000000>;
- reg = <0>;
- };
-
- codec@1 {
- compatible = "ti,tlv320aic26";
- spi-max-frequency = <100000>;
- reg = <1>;
- };
- };
+This file has moved to spi-controller.yaml.
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..876c0623f322916a1d228da85371a381230d37a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI Controller Generic Binding
+
+maintainers:
+ - Mark Brown <broonie@kernel.org>
+
+description: |
+ SPI busses can be described with a node for the SPI controller device
+ and a set of child nodes for each SPI slave on the bus. The system SPI
+ controller may be described for use in SPI master mode or in SPI slave mode,
+ but not for both at the same time.
+
+properties:
+ $nodename:
+ pattern: "^spi(@.*|-[0-9a-f])*$"
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ cs-gpios:
+ description: |
+ GPIOs used as chip selects.
+ If that property is used, the number of chip selects will be
+ increased automatically with max(cs-gpios, hardware chip selects).
+
+ So if, for example, the controller has 2 CS lines, and the
+ cs-gpios looks like this
+ cs-gpios = <&gpio1 0 0>, <0>, <&gpio1 1 0>, <&gpio1 2 0>;
+
+ Then it should be configured so that num_chipselect = 4, with
+ the following mapping
+ cs0 : &gpio1 0 0
+ cs1 : native
+ cs2 : &gpio1 1 0
+ cs3 : &gpio1 2 0
+
+ num-cs:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Total number of chip selects.
+
+ spi-slave:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The SPI controller acts as a slave, instead of a master.
+
+patternProperties:
+ "^slave$":
+ type: object
+
+ properties:
+ compatible:
+ description:
+ Compatible of the SPI device.
+
+ required:
+ - compatible
+
+ "^.*@[0-9a-f]+$":
+ type: object
+
+ properties:
+ compatible:
+ description:
+ Compatible of the SPI device.
+
+ reg:
+ maxItems: 1
+ minimum: 0
+ maximum: 256
+ description:
+ Chip select used by the device.
+
+ spi-3wire:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The device requires 3-wire mode.
+
+ spi-cpha:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The device requires shifted clock phase (CPHA) mode.
+
+ spi-cpol:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The device requires inverse clock polarity (CPOL) mode.
+
+ spi-cs-high:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The device requires the chip select active high.
+
+ spi-lsb-first:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The device requires the LSB first mode.
+
+ spi-max-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Maximum SPI clocking speed of the device in Hz.
+
+ spi-rx-bus-width:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 1, 2, 4 ]
+ - default: 1
+ description:
+ Bus width to the SPI bus used for MISO.
+
+ spi-rx-delay-us:
+ description:
+ Delay, in microseconds, after a read transfer.
+
+ spi-tx-bus-width:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 1, 2, 4 ]
+ - default: 1
+ description:
+ Bus width to the SPI bus used for MOSI.
+
+ spi-tx-delay-us:
+ description:
+ Delay, in microseconds, after a write transfer.
+
+ required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ spi@f00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ ethernet-switch@0 {
+ compatible = "micrel,ks8995m";
+ spi-max-frequency = <1000000>;
+ reg = <0>;
+ };
+
+ codec@1 {
+ compatible = "ti,tlv320aic26";
+ spi-max-frequency = <100000>;
+ reg = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.txt b/Documentation/devicetree/bindings/spi/spi-gpio.txt
deleted file mode 100644
index 52db562f17a422df5d7db5cc5a3ece060009a657..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/spi/spi-gpio.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-SPI-GPIO devicetree bindings
-
-This represents a group of 3-n GPIO lines used for bit-banged SPI on dedicated
-GPIO lines.
-
-Required properties:
-
- - compatible: should be set to "spi-gpio"
- - #address-cells: should be set to <0x1>
- - ranges
- - sck-gpios: GPIO spec for the SCK line to use
- - miso-gpios: GPIO spec for the MISO line to use
- - mosi-gpios: GPIO spec for the MOSI line to use
- - cs-gpios: GPIOs to use for chipselect lines.
- Not needed if num-chipselects = <0>.
- - num-chipselects: Number of chipselect lines. Should be <0> if a single device
- with no chip select is connected.
-
-Deprecated bindings:
-
-These legacy GPIO line bindings can alternatively be used to define the
-GPIO lines used, they should not be used in new device trees.
-
- - gpio-sck: GPIO spec for the SCK line to use
- - gpio-miso: GPIO spec for the MISO line to use
- - gpio-mosi: GPIO spec for the MOSI line to use
-
-Example:
-
- spi {
- compatible = "spi-gpio";
- #address-cells = <0x1>;
- ranges;
-
- sck-gpios = <&gpio 95 0>;
- miso-gpios = <&gpio 98 0>;
- mosi-gpios = <&gpio 97 0>;
- cs-gpios = <&gpio 125 0>;
- num-chipselects = <1>;
-
- /* clients */
- };
-
diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.yaml b/Documentation/devicetree/bindings/spi/spi-gpio.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..55c4f1705f07ae5fc1d3cc24927e554828ffc271
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-gpio.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-GPIO devicetree bindings
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+description:
+ This represents a group of 3-n GPIO lines used for bit-banged SPI on
+ dedicated GPIO lines.
+
+allOf:
+ - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+ compatible:
+ const: spi-gpio
+
+ sck-gpios:
+ description: GPIO spec for the SCK line to use
+ maxItems: 1
+
+ miso-gpios:
+ description: GPIO spec for the MISO line to use
+ maxItems: 1
+
+ mosi-gpios:
+ description: GPIO spec for the MOSI line to use
+ maxItems: 1
+
+ cs-gpios:
+ description: GPIOs to use for chipselect lines.
+ Not needed if num-chipselects = <0>.
+ minItems: 1
+ maxItems: 1024
+
+ num-chipselects:
+ description: Number of chipselect lines. Should be <0> if a single device
+ with no chip select is connected.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ # Deprecated properties
+ gpio-sck: false
+ gpio-miso: false
+ gpio-mosi: false
+
+required:
+ - compatible
+ - num-chipselects
+ - sck-gpios
+
+examples:
+ - |
+ spi {
+ compatible = "spi-gpio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ sck-gpios = <&gpio 95 0>;
+ miso-gpios = <&gpio 98 0>;
+ mosi-gpios = <&gpio 97 0>;
+ cs-gpios = <&gpio 125 0>;
+ num-chipselects = <1>;
+
+ /* clients */
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..dfb697c69341f541af81db26473af572b1812eef
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-pl022.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PL022 SPI controller
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: "spi-controller.yaml#"
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,pl022
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: arm,pl022
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - enum:
+ - SSPCLK
+ - sspclk
+ - const: apb_pclk
+
+ pl022,autosuspend-delay:
+ description: delay in ms following transfer completion before the
+ runtime power management system suspends the device. A setting of 0
+ indicates no delay and the device will be suspended immediately.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+ pl022,rt:
+ description: indicates the controller should run the message pump with realtime
+ priority to minimise the transfer latency on the bus (boolean)
+ type: boolean
+
+ dmas:
+ description:
+ Two or more DMA channel specifiers following the convention outlined
+ in bindings/dma/dma.txt
+ minItems: 2
+ maxItems: 32
+
+ dma-names:
+ description:
+ There must be at least one channel named "tx" for transmit and named "rx"
+ for receive.
+ minItems: 2
+ maxItems: 32
+ additionalItems: true
+ items:
+ - const: rx
+ - const: tx
+
+patternProperties:
+ "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
+ type: object
+ # SPI slave nodes must be children of the SPI master node and can
+ # contain the following properties.
+ properties:
+ pl022,interface:
+ description: SPI interface type
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - enum:
+ - 0 # SPI
+ - 1 # Texas Instruments Synchronous Serial Frame Format
+ - 2 # Microwire (Half Duplex)
+
+ pl022,com-mode:
+ description: Specifies the transfer mode
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - enum:
+ - 0 # interrupt mode
+ - 1 # polling mode
+ - 2 # DMA mode
+ default: 1
+
+ pl022,rx-level-trig:
+ description: Rx FIFO watermark level
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ maximum: 4
+
+ pl022,tx-level-trig:
+ description: Tx FIFO watermark level
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0
+ maximum: 4
+
+ pl022,ctrl-len:
+ description: Microwire interface - Control length
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - minimum: 0x03
+ maximum: 0x1f
+
+ pl022,wait-state:
+ description: Microwire interface - Wait state
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - enum: [ 0, 1 ]
+
+ pl022,duplex:
+ description: Microwire interface - Full/Half duplex
+ allOf:
+ - $ref: "/schemas/types.yaml#/definitions/uint32"
+ - enum: [ 0, 1 ]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ spi@e0100000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xe0100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 31 0x4>;
+ dmas = <&dma_controller 23 1>,
+ <&dma_controller 24 0>;
+ dma-names = "rx", "tx";
+
+ m25p80@1 {
+ compatible = "st,m25p80";
+ reg = <1>;
+ spi-max-frequency = <12000000>;
+ spi-cpol;
+ spi-cpha;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x2>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ pl022,ctrl-len = <0x11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt b/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
index adeeb63e84b95d6d353a7eb123b895d0a6386ab6..bfc038b9478d153c7d636b03b12cdc7972600d5a 100644
--- a/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
@@ -19,8 +19,11 @@ Required properties:
- reg: chip-Select number (QSPI controller may connect 2 flashes)
- spi-max-frequency: max frequency of spi bus
-Optional property:
+Optional properties:
- spi-rx-bus-width: see ./spi-bus.txt for the description
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names: DMA request names should include "tx" and "rx" if present.
Example:
diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt
deleted file mode 100644
index c75d604a82900fe3a05f54e4f52c4f28dafc4cbf..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/spi/spi-sun4i.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Allwinner A10 SPI controller
-
-Required properties:
-- compatible: Should be "allwinner,sun4-a10-spi".
-- reg: Should contain register location and length.
-- interrupts: Should contain interrupt.
-- clocks: phandle to the clocks feeding the SPI controller. Two are
- needed:
- - "ahb": the gated AHB parent clock
- - "mod": the parent module clock
-- clock-names: Must contain the clock names described just above
-
-Example:
-
-spi1: spi@1c06000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c06000 0x1000>;
- interrupts = <11>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
- clock-names = "ahb", "mod";
- #address-cells = <1>;
- #size-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
deleted file mode 100644
index 435a8e0731ac02ce8c9572eb118012a499b11280..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Allwinner A31/H3 SPI controller
-
-Required properties:
-- compatible: Should be "allwinner,sun6i-a31-spi" or "allwinner,sun8i-h3-spi".
-- reg: Should contain register location and length.
-- interrupts: Should contain interrupt.
-- clocks: phandle to the clocks feeding the SPI controller. Two are
- needed:
- - "ahb": the gated AHB parent clock
- - "mod": the parent module clock
-- clock-names: Must contain the clock names described just above
-- resets: phandle to the reset controller asserting this device in
- reset
-
-Optional properties:
-- dmas: DMA specifiers for rx and tx dma. See the DMA client binding,
- Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request names should include "rx" and "tx" if present.
-
-Example:
-
-spi1: spi@1c69000 {
- compatible = "allwinner,sun6i-a31-spi";
- reg = <0x01c69000 0x1000>;
- interrupts = <0 66 4>;
- clocks = <&ahb1_gates 21>, <&spi1_clk>;
- clock-names = "ahb", "mod";
- resets = <&ahb1_rst 21>;
-};
-
-spi0: spi@1c68000 {
- compatible = "allwinner,sun8i-h3-spi";
- reg = <0x01c68000 0x1000>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
- clock-names = "ahb", "mod";
- dmas = <&dma 23>, <&dma 23>;
- dma-names = "rx", "tx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins>;
- resets = <&ccu RST_BUS_SPI0>;
- #address-cells = <1>;
- #size-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-synquacer.txt b/Documentation/devicetree/bindings/spi/spi-synquacer.txt
new file mode 100644
index 0000000000000000000000000000000000000000..291dfa692d0a88d3363f6365e5d5e137fef6f752
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-synquacer.txt
@@ -0,0 +1,27 @@
+* Socionext Synquacer HS-SPI bindings
+
+Required Properties:
+- compatible: should be "socionext,synquacer-spi"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: should contain the "spi_rx", "spi_tx" and "spi_fault" interrupts.
+- clocks: core clock iHCLK. Optional rate clock iPCLK (default is iHCLK)
+- clock-names: Shall be "iHCLK" and "iPCLK" respectively
+
+Optional Properties:
+- socionext,use-rtm: boolean, if required to use "retimed clock" for RX
+- socionext,set-aces: boolean, if same active clock edges field to be set.
+
+Example:
+
+ spi0: spi@ff110000 {
+ compatible = "socionext,synquacer-spi";
+ reg = <0xff110000 0x1000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_hsspi>;
+ clock-names = "iHCLK";
+ socionext,use-rtm;
+ socionext,set-aces;
+ };
diff --git a/Documentation/devicetree/bindings/spi/spi_pl022.txt b/Documentation/devicetree/bindings/spi/spi_pl022.txt
deleted file mode 100644
index 7638b4968ddb4ad8adabbf36ab540751b6eec343..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/spi/spi_pl022.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-ARM PL022 SPI controller
-
-Required properties:
-- compatible : "arm,pl022", "arm,primecell"
-- reg : Offset and length of the register set for the device
-- interrupts : Should contain SPI controller interrupt
-- num-cs : total number of chipselects
-
-Optional properties:
-- cs-gpios : should specify GPIOs used for chipselects.
- The gpios will be referred to as reg = <index> in the SPI child nodes.
- If unspecified, a single SPI device without a chip select can be used.
-- pl022,autosuspend-delay : delay in ms following transfer completion before
- the runtime power management system suspends the
- device. A setting of 0 indicates no delay and the
- device will be suspended immediately
-- pl022,rt : indicates the controller should run the message pump with realtime
- priority to minimise the transfer latency on the bus (boolean)
-- dmas : Two or more DMA channel specifiers following the convention outlined
- in bindings/dma/dma.txt
-- dma-names: Names for the dma channels, if present. There must be at
- least one channel named "tx" for transmit and named "rx" for
- receive.
-
-
-SPI slave nodes must be children of the SPI master node and can
-contain the following properties.
-
-- pl022,interface : interface type:
- 0: SPI
- 1: Texas Instruments Synchronous Serial Frame Format
- 2: Microwire (Half Duplex)
-- pl022,com-mode : specifies the transfer mode:
- 0: interrupt mode
- 1: polling mode (default mode if property not present)
- 2: DMA mode
-- pl022,rx-level-trig : Rx FIFO watermark level
-- pl022,tx-level-trig : Tx FIFO watermark level
-- pl022,ctrl-len : Microwire interface: Control length
-- pl022,wait-state : Microwire interface: Wait state
-- pl022,duplex : Microwire interface: Full/Half duplex
-
-
-Example:
-
- spi@e0100000 {
- compatible = "arm,pl022", "arm,primecell";
- reg = <0xe0100000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 31 0x4>;
- dmas = <&dma-controller 23 1>,
- <&dma-controller 24 0>;
- dma-names = "rx", "tx";
-
- m25p80@1 {
- compatible = "st,m25p80";
- reg = <1>;
- spi-max-frequency = <12000000>;
- spi-cpol;
- spi-cpha;
- pl022,interface = <0>;
- pl022,com-mode = <0x2>;
- pl022,rx-level-trig = <0>;
- pl022,tx-level-trig = <0>;
- pl022,ctrl-len = <0x11>;
- pl022,wait-state = <0>;
- pl022,duplex = <0>;
- };
- };
diff --git a/MAINTAINERS b/MAINTAINERS
index aa738a14bf6e05113ed70863cda0228797125594..369b2af4bd7673cc2f1dda52405880ae7ab14eb0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14660,6 +14660,14 @@ S: Maintained
F: drivers/net/ethernet/socionext/netsec.c
F: Documentation/devicetree/bindings/net/socionext-netsec.txt
+SOCIONEXT (SNI) Synquacer SPI DRIVER
+M: Masahisa Kojima <masahisa.kojima@linaro.org>
+M: Jassi Brar <jaswinder.singh@linaro.org>
+L: linux-spi@vger.kernel.org
+S: Maintained
+F: drivers/spi/spi-synquacer.c
+F: Documentation/devicetree/bindings/spi/spi-synquacer.txt
+
SOLIDRUN CLEARFOG SUPPORT
M: Russell King <linux@armlinux.org.uk>
S: Maintained
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 30a40280c157094a85a10c71722acfc8346ca932..3a1d8f1170de0c6ab1006f15fbf3e559b2bf94ff 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -120,7 +120,7 @@ config SPI_AXI_SPI_ENGINE
config SPI_BCM2835
tristate "BCM2835 SPI controller"
depends on GPIOLIB
- depends on ARCH_BCM2835 || COMPILE_TEST
+ depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
help
This selects a driver for the Broadcom BCM2835 SPI master.
@@ -131,7 +131,7 @@ config SPI_BCM2835
config SPI_BCM2835AUX
tristate "BCM2835 SPI auxiliary controller"
- depends on (ARCH_BCM2835 && GPIOLIB) || COMPILE_TEST
+ depends on ((ARCH_BCM2835 || ARCH_BRCMSTB) && GPIOLIB) || COMPILE_TEST
help
This selects a driver for the Broadcom BCM2835 SPI aux master.
@@ -733,6 +733,16 @@ config SPI_SUN6I
help
This enables using the SPI controller on the Allwinner A31 SoCs.
+config SPI_SYNQUACER
+ tristate "Socionext's SynQuacer HighSpeed SPI controller"
+ depends on ARCH_SYNQUACER || COMPILE_TEST
+ help
+ SPI driver for Socionext's High speed SPI controller which provides
+ various operating modes for interfacing to serial peripheral devices
+ that use the de-facto standard SPI protocol.
+
+ It also supports the new dual-bit and quad-bit SPI protocol.
+
config SPI_MXIC
tristate "Macronix MX25F0A SPI controller"
depends on SPI_MASTER
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index f2f78d03dc28a32b3ba70ac13187e7775693ae56..63dcab552bcbafb6a484fb3a23d60c4f803a0b3b 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_SPI_STM32_QSPI) += spi-stm32-qspi.o
obj-$(CONFIG_SPI_ST_SSC4) += spi-st-ssc4.o
obj-$(CONFIG_SPI_SUN4I) += spi-sun4i.o
obj-$(CONFIG_SPI_SUN6I) += spi-sun6i.o
+obj-$(CONFIG_SPI_SYNQUACER) += spi-synquacer.o
obj-$(CONFIG_SPI_TEGRA114) += spi-tegra114.o
obj-$(CONFIG_SPI_TEGRA20_SFLASH) += spi-tegra20-sflash.o
obj-$(CONFIG_SPI_TEGRA20_SLINK) += spi-tegra20-slink.o
diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index 9f24d5f0b43129560be292dc7aa3af86462bea98..6a7d7b553d956c4d2ba7c60a92092766486fb200 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -151,6 +151,7 @@ struct atmel_qspi {
const struct atmel_qspi_caps *caps;
u32 pending;
u32 mr;
+ u32 scr;
struct completion cmd_completion;
};
@@ -382,7 +383,7 @@ static int atmel_qspi_setup(struct spi_device *spi)
struct spi_controller *ctrl = spi->master;
struct atmel_qspi *aq = spi_controller_get_devdata(ctrl);
unsigned long src_rate;
- u32 scr, scbr;
+ u32 scbr;
if (ctrl->busy)
return -EBUSY;
@@ -399,13 +400,13 @@ static int atmel_qspi_setup(struct spi_device *spi)
if (scbr > 0)
scbr--;
- scr = QSPI_SCR_SCBR(scbr);
- writel_relaxed(scr, aq->regs + QSPI_SCR);
+ aq->scr = QSPI_SCR_SCBR(scbr);
+ writel_relaxed(aq->scr, aq->regs + QSPI_SCR);
return 0;
}
-static int atmel_qspi_init(struct atmel_qspi *aq)
+static void atmel_qspi_init(struct atmel_qspi *aq)
{
/* Reset the QSPI controller */
writel_relaxed(QSPI_CR_SWRST, aq->regs + QSPI_CR);
@@ -416,8 +417,6 @@ static int atmel_qspi_init(struct atmel_qspi *aq)
/* Enable the QSPI controller */
writel_relaxed(QSPI_CR_QSPIEN, aq->regs + QSPI_CR);
-
- return 0;
}
static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id)
@@ -536,9 +535,7 @@ static int atmel_qspi_probe(struct platform_device *pdev)
if (err)
goto disable_qspick;
- err = atmel_qspi_init(aq);
- if (err)
- goto disable_qspick;
+ atmel_qspi_init(aq);
err = spi_register_controller(ctrl);
if (err)
@@ -587,7 +584,11 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev)
clk_prepare_enable(aq->pclk);
clk_prepare_enable(aq->qspick);
- return atmel_qspi_init(aq);
+ atmel_qspi_init(aq);
+
+ writel_relaxed(aq->scr, aq->regs + QSPI_SCR);
+
+ return 0;
}
static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
diff --git a/drivers/spi/spi-at91-usart.c b/drivers/spi/spi-at91-usart.c
index f763e14bdf12421c008a9f59cac5bff5afb45076..a40bb2ef89dc326c1f0f11eedd9cbf2eba29dc1a 100644
--- a/drivers/spi/spi-at91-usart.c
+++ b/drivers/spi/spi-at91-usart.c
@@ -8,9 +8,12 @@
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-direction.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
@@ -59,6 +62,8 @@
#define US_INIT \
(US_MR_SPI_MASTER | US_MR_CHRL | US_MR_CLKO | US_MR_WRDBT)
+#define US_DMA_MIN_BYTES 16
+#define US_DMA_TIMEOUT (msecs_to_jiffies(1000))
/* Register access macros */
#define at91_usart_spi_readl(port, reg) \
@@ -72,14 +77,19 @@
writeb_relaxed((value), (port)->regs + US_##reg)
struct at91_usart_spi {
+ struct platform_device *mpdev;
struct spi_transfer *current_transfer;
void __iomem *regs;
struct device *dev;
struct clk *clk;
+ struct completion xfer_completion;
+
/*used in interrupt to protect data reading*/
spinlock_t lock;
+ phys_addr_t phybase;
+
int irq;
unsigned int current_tx_remaining_bytes;
unsigned int current_rx_remaining_bytes;
@@ -88,8 +98,182 @@ struct at91_usart_spi {
u32 status;
bool xfer_failed;
+ bool use_dma;
};
+static void dma_callback(void *data)
+{
+ struct spi_controller *ctlr = data;
+ struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+
+ at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
+ aus->current_rx_remaining_bytes = 0;
+ complete(&aus->xfer_completion);
+}
+
+static bool at91_usart_spi_can_dma(struct spi_controller *ctrl,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct at91_usart_spi *aus = spi_master_get_devdata(ctrl);
+
+ return aus->use_dma && xfer->len >= US_DMA_MIN_BYTES;
+}
+
+static int at91_usart_spi_configure_dma(struct spi_controller *ctlr,
+ struct at91_usart_spi *aus)
+{
+ struct dma_slave_config slave_config;
+ struct device *dev = &aus->mpdev->dev;
+ phys_addr_t phybase = aus->phybase;
+ dma_cap_mask_t mask;
+ int err = 0;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ ctlr->dma_tx = dma_request_slave_channel_reason(dev, "tx");
+ if (IS_ERR_OR_NULL(ctlr->dma_tx)) {
+ if (IS_ERR(ctlr->dma_tx)) {
+ err = PTR_ERR(ctlr->dma_tx);
+ goto at91_usart_spi_error_clear;
+ }
+
+ dev_dbg(dev,
+ "DMA TX channel not available, SPI unable to use DMA\n");
+ err = -EBUSY;
+ goto at91_usart_spi_error_clear;
+ }
+
+ ctlr->dma_rx = dma_request_slave_channel_reason(dev, "rx");
+ if (IS_ERR_OR_NULL(ctlr->dma_rx)) {
+ if (IS_ERR(ctlr->dma_rx)) {
+ err = PTR_ERR(ctlr->dma_rx);
+ goto at91_usart_spi_error;
+ }
+
+ dev_dbg(dev,
+ "DMA RX channel not available, SPI unable to use DMA\n");
+ err = -EBUSY;
+ goto at91_usart_spi_error;
+ }
+
+ slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ slave_config.dst_addr = (dma_addr_t)phybase + US_THR;
+ slave_config.src_addr = (dma_addr_t)phybase + US_RHR;
+ slave_config.src_maxburst = 1;
+ slave_config.dst_maxburst = 1;
+ slave_config.device_fc = false;
+
+ slave_config.direction = DMA_DEV_TO_MEM;
+ if (dmaengine_slave_config(ctlr->dma_rx, &slave_config)) {
+ dev_err(&ctlr->dev,
+ "failed to configure rx dma channel\n");
+ err = -EINVAL;
+ goto at91_usart_spi_error;
+ }
+
+ slave_config.direction = DMA_MEM_TO_DEV;
+ if (dmaengine_slave_config(ctlr->dma_tx, &slave_config)) {
+ dev_err(&ctlr->dev,
+ "failed to configure tx dma channel\n");
+ err = -EINVAL;
+ goto at91_usart_spi_error;
+ }
+
+ aus->use_dma = true;
+ return 0;
+
+at91_usart_spi_error:
+ if (!IS_ERR_OR_NULL(ctlr->dma_tx))
+ dma_release_channel(ctlr->dma_tx);
+ if (!IS_ERR_OR_NULL(ctlr->dma_rx))
+ dma_release_channel(ctlr->dma_rx);
+ ctlr->dma_tx = NULL;
+ ctlr->dma_rx = NULL;
+
+at91_usart_spi_error_clear:
+ return err;
+}
+
+static void at91_usart_spi_release_dma(struct spi_controller *ctlr)
+{
+ if (ctlr->dma_rx)
+ dma_release_channel(ctlr->dma_rx);
+ if (ctlr->dma_tx)
+ dma_release_channel(ctlr->dma_tx);
+}
+
+static void at91_usart_spi_stop_dma(struct spi_controller *ctlr)
+{
+ if (ctlr->dma_rx)
+ dmaengine_terminate_all(ctlr->dma_rx);
+ if (ctlr->dma_tx)
+ dmaengine_terminate_all(ctlr->dma_tx);
+}
+
+static int at91_usart_spi_dma_transfer(struct spi_controller *ctlr,
+ struct spi_transfer *xfer)
+{
+ struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+ struct dma_chan *rxchan = ctlr->dma_rx;
+ struct dma_chan *txchan = ctlr->dma_tx;
+ struct dma_async_tx_descriptor *rxdesc;
+ struct dma_async_tx_descriptor *txdesc;
+ dma_cookie_t cookie;
+
+ /* Disable RX interrupt */
+ at91_usart_spi_writel(aus, IDR, US_IR_RXRDY);
+
+ rxdesc = dmaengine_prep_slave_sg(rxchan,
+ xfer->rx_sg.sgl,
+ xfer->rx_sg.nents,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
+ if (!rxdesc)
+ goto at91_usart_spi_err_dma;
+
+ txdesc = dmaengine_prep_slave_sg(txchan,
+ xfer->tx_sg.sgl,
+ xfer->tx_sg.nents,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
+ if (!txdesc)
+ goto at91_usart_spi_err_dma;
+
+ rxdesc->callback = dma_callback;
+ rxdesc->callback_param = ctlr;
+
+ cookie = rxdesc->tx_submit(rxdesc);
+ if (dma_submit_error(cookie))
+ goto at91_usart_spi_err_dma;
+
+ cookie = txdesc->tx_submit(txdesc);
+ if (dma_submit_error(cookie))
+ goto at91_usart_spi_err_dma;
+
+ rxchan->device->device_issue_pending(rxchan);
+ txchan->device->device_issue_pending(txchan);
+
+ return 0;
+
+at91_usart_spi_err_dma:
+ /* Enable RX interrupt if something fails and fallback to PIO */
+ at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
+ at91_usart_spi_stop_dma(ctlr);
+
+ return -ENOMEM;
+}
+
+static unsigned long at91_usart_spi_dma_timeout(struct at91_usart_spi *aus)
+{
+ return wait_for_completion_timeout(&aus->xfer_completion,
+ US_DMA_TIMEOUT);
+}
+
static inline u32 at91_usart_spi_tx_ready(struct at91_usart_spi *aus)
{
return aus->status & US_IR_TXRDY;
@@ -216,6 +400,8 @@ static int at91_usart_spi_transfer_one(struct spi_controller *ctlr,
struct spi_transfer *xfer)
{
struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+ unsigned long dma_timeout = 0;
+ int ret = 0;
at91_usart_spi_set_xfer_speed(aus, xfer);
aus->xfer_failed = false;
@@ -225,8 +411,25 @@ static int at91_usart_spi_transfer_one(struct spi_controller *ctlr,
while ((aus->current_tx_remaining_bytes ||
aus->current_rx_remaining_bytes) && !aus->xfer_failed) {
- at91_usart_spi_read_status(aus);
- at91_usart_spi_tx(aus);
+ reinit_completion(&aus->xfer_completion);
+ if (at91_usart_spi_can_dma(ctlr, spi, xfer) &&
+ !ret) {
+ ret = at91_usart_spi_dma_transfer(ctlr, xfer);
+ if (ret)
+ continue;
+
+ dma_timeout = at91_usart_spi_dma_timeout(aus);
+
+ if (WARN_ON(dma_timeout == 0)) {
+ dev_err(&spi->dev, "DMA transfer timeout\n");
+ return -EIO;
+ }
+ aus->current_tx_remaining_bytes = 0;
+ } else {
+ at91_usart_spi_read_status(aus);
+ at91_usart_spi_tx(aus);
+ }
+
cpu_relax();
}
@@ -345,6 +548,7 @@ static int at91_usart_spi_probe(struct platform_device *pdev)
controller->transfer_one = at91_usart_spi_transfer_one;
controller->prepare_message = at91_usart_spi_prepare_message;
controller->unprepare_message = at91_usart_spi_unprepare_message;
+ controller->can_dma = at91_usart_spi_can_dma;
controller->cleanup = at91_usart_spi_cleanup;
controller->max_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
US_MIN_CLK_DIV);
@@ -376,7 +580,17 @@ static int at91_usart_spi_probe(struct platform_device *pdev)
aus->spi_clk = clk_get_rate(clk);
at91_usart_spi_init(aus);
+ aus->phybase = regs->start;
+
+ aus->mpdev = to_platform_device(pdev->dev.parent);
+
+ ret = at91_usart_spi_configure_dma(controller, aus);
+ if (ret)
+ goto at91_usart_fail_dma;
+
spin_lock_init(&aus->lock);
+ init_completion(&aus->xfer_completion);
+
ret = devm_spi_register_master(&pdev->dev, controller);
if (ret)
goto at91_usart_fail_register_master;
@@ -389,6 +603,8 @@ static int at91_usart_spi_probe(struct platform_device *pdev)
return 0;
at91_usart_fail_register_master:
+ at91_usart_spi_release_dma(controller);
+at91_usart_fail_dma:
clk_disable_unprepare(clk);
at91_usart_spi_probe_fail:
spi_master_put(controller);
@@ -453,6 +669,7 @@ static int at91_usart_spi_remove(struct platform_device *pdev)
struct spi_controller *ctlr = platform_get_drvdata(pdev);
struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+ at91_usart_spi_release_dma(ctlr);
clk_disable_unprepare(aus->clk);
return 0;
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index 402c1efcd762e296fb898ed46e61e8f662c18df5..6f243a90c844d5078faeb442fb620e6ef37e750e 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -13,6 +13,7 @@
#include <linux/clk.h>
#include <linux/completion.h>
+#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
@@ -64,14 +65,18 @@
#define BCM2835_SPI_FIFO_SIZE 64
#define BCM2835_SPI_FIFO_SIZE_3_4 48
-#define BCM2835_SPI_POLLING_LIMIT_US 30
-#define BCM2835_SPI_POLLING_JIFFIES 2
#define BCM2835_SPI_DMA_MIN_LENGTH 96
#define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
| SPI_NO_CS | SPI_3WIRE)
#define DRV_NAME "spi-bcm2835"
+/* define polling limits */
+unsigned int polling_limit_us = 30;
+module_param(polling_limit_us, uint, 0664);
+MODULE_PARM_DESC(polling_limit_us,
+ "time in us to run a transfer in polling mode\n");
+
/**
* struct bcm2835_spi - BCM2835 SPI controller
* @regs: base address of register map
@@ -88,6 +93,15 @@
* length is not a multiple of 4 (to overcome hardware limitation)
* @tx_spillover: whether @tx_prologue spills over to second TX sglist entry
* @dma_pending: whether a DMA transfer is in progress
+ * @debugfs_dir: the debugfs directory - neede to remove debugfs when
+ * unloading the module
+ * @count_transfer_polling: count of how often polling mode is used
+ * @count_transfer_irq: count of how often interrupt mode is used
+ * @count_transfer_irq_after_polling: count of how often we fall back to
+ * interrupt mode after starting in polling mode.
+ * These are counted as well in @count_transfer_polling and
+ * @count_transfer_irq
+ * @count_transfer_dma: count how often dma mode is used
*/
struct bcm2835_spi {
void __iomem *regs;
@@ -102,8 +116,55 @@ struct bcm2835_spi {
int rx_prologue;
unsigned int tx_spillover;
unsigned int dma_pending;
+
+ struct dentry *debugfs_dir;
+ u64 count_transfer_polling;
+ u64 count_transfer_irq;
+ u64 count_transfer_irq_after_polling;
+ u64 count_transfer_dma;
};
+#if defined(CONFIG_DEBUG_FS)
+static void bcm2835_debugfs_create(struct bcm2835_spi *bs,
+ const char *dname)
+{
+ char name[64];
+ struct dentry *dir;
+
+ /* get full name */
+ snprintf(name, sizeof(name), "spi-bcm2835-%s", dname);
+
+ /* the base directory */
+ dir = debugfs_create_dir(name, NULL);
+ bs->debugfs_dir = dir;
+
+ /* the counters */
+ debugfs_create_u64("count_transfer_polling", 0444, dir,
+ &bs->count_transfer_polling);
+ debugfs_create_u64("count_transfer_irq", 0444, dir,
+ &bs->count_transfer_irq);
+ debugfs_create_u64("count_transfer_irq_after_polling", 0444, dir,
+ &bs->count_transfer_irq_after_polling);
+ debugfs_create_u64("count_transfer_dma", 0444, dir,
+ &bs->count_transfer_dma);
+}
+
+static void bcm2835_debugfs_remove(struct bcm2835_spi *bs)
+{
+ debugfs_remove_recursive(bs->debugfs_dir);
+ bs->debugfs_dir = NULL;
+}
+#else
+static void bcm2835_debugfs_create(struct bcm2835_spi *bs,
+ const char *dname)
+{
+}
+
+static void bcm2835_debugfs_remove(struct bcm2835_spi *bs)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg)
{
return readl(bs->regs + reg);
@@ -248,9 +309,9 @@ static inline void bcm2835_wr_fifo_blind(struct bcm2835_spi *bs, int count)
}
}
-static void bcm2835_spi_reset_hw(struct spi_master *master)
+static void bcm2835_spi_reset_hw(struct spi_controller *ctlr)
{
- struct bcm2835_spi *bs = spi_master_get_devdata(master);
+ struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
/* Disable SPI interrupts and transfer */
@@ -269,8 +330,8 @@ static void bcm2835_spi_reset_hw(struct spi_master *master)
static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
{
- struct spi_master *master = dev_id;
- struct bcm2835_spi *bs = spi_master_get_devdata(master);
+ struct spi_controller *ctlr = dev_id;
+ struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
/*
@@ -292,20 +353,23 @@ static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
if (!bs->rx_len) {
/* Transfer complete - reset SPI HW */
- bcm2835_spi_reset_hw(master);
+ bcm2835_spi_reset_hw(ctlr);
/* wake up the framework */
- complete(&master->xfer_completion);
+ complete(&ctlr->xfer_completion);
}
return IRQ_HANDLED;
}
-static int bcm2835_spi_transfer_one_irq(struct spi_master *master,
+static int bcm2835_spi_transfer_one_irq(struct spi_controller *ctlr,
struct spi_device *spi,
struct spi_transfer *tfr,
u32 cs, bool fifo_empty)
{
- struct bcm2835_spi *bs = spi_master_get_devdata(master);
+ struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
+
+ /* update usage statistics */
+ bs->count_transfer_irq++;
/*
* Enable HW block, but with interrupts still disabled.
@@ -328,7 +392,7 @@ static int bcm2835_spi_transfer_one_irq(struct spi_master *master,
/**
* bcm2835_spi_transfer_prologue() - transfer first few bytes without DMA
- * @master: SPI master
+ * @ctlr: SPI master controller
* @tfr: SPI transfer
* @bs: BCM2835 SPI controller
* @cs: CS register
@@ -372,7 +436,7 @@ static int bcm2835_spi_transfer_one_irq(struct spi_master *master,
* be transmitted in 32-bit width to ensure that the following DMA transfer can
* pick up the residue in the RX FIFO in ungarbled form.
*/
-static void bcm2835_spi_transfer_prologue(struct spi_master *master,
+static void bcm2835_spi_transfer_prologue(struct spi_controller *ctlr,
struct spi_transfer *tfr,
struct bcm2835_spi *bs,
u32 cs)
@@ -413,9 +477,9 @@ static void bcm2835_spi_transfer_prologue(struct spi_master *master,
bcm2835_wr_fifo_count(bs, bs->rx_prologue);
bcm2835_wait_tx_fifo_empty(bs);
bcm2835_rd_fifo_count(bs, bs->rx_prologue);
- bcm2835_spi_reset_hw(master);
+ bcm2835_spi_reset_hw(ctlr);
- dma_sync_single_for_device(master->dma_rx->device->dev,
+ dma_sync_single_for_device(ctlr->dma_rx->device->dev,
sg_dma_address(&tfr->rx_sg.sgl[0]),
bs->rx_prologue, DMA_FROM_DEVICE);
@@ -479,11 +543,11 @@ static void bcm2835_spi_undo_prologue(struct bcm2835_spi *bs)
static void bcm2835_spi_dma_done(void *data)
{
- struct spi_master *master = data;
- struct bcm2835_spi *bs = spi_master_get_devdata(master);
+ struct spi_controller *ctlr = data;
+ struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
/* reset fifo and HW */
- bcm2835_spi_reset_hw(master);
+ bcm2835_spi_reset_hw(ctlr);
/* and terminate tx-dma as we do not have an irq for it
* because when the rx dma will terminate and this callback
@@ -491,15 +555,15 @@ static void bcm2835_spi_dma_done(void *data)
* situation otherwise...
*/
if (cmpxchg(&bs->dma_pending, true, false)) {
- dmaengine_terminate_async(master->dma_tx);
+ dmaengine_terminate_async(ctlr->dma_tx);
bcm2835_spi_undo_prologue(bs);
}
/* and mark as completed */;
- complete(&master->xfer_completion);
+ complete(&ctlr->xfer_completion);
}
-static int bcm2835_spi_prepare_sg(struct spi_master *master,
+static int bcm2835_spi_prepare_sg(struct spi_controller *ctlr,
struct spi_transfer *tfr,
bool is_tx)
{
@@ -514,14 +578,14 @@ static int bcm2835_spi_prepare_sg(struct spi_master *master,
if (is_tx) {
dir = DMA_MEM_TO_DEV;
- chan = master->dma_tx;
+ chan = ctlr->dma_tx;
nents = tfr->tx_sg.nents;
sgl = tfr->tx_sg.sgl;
flags = 0 /* no tx interrupt */;
} else {
dir = DMA_DEV_TO_MEM;
- chan = master->dma_rx;
+ chan = ctlr->dma_rx;
nents = tfr->rx_sg.nents;
sgl = tfr->rx_sg.sgl;
flags = DMA_PREP_INTERRUPT;
@@ -534,7 +598,7 @@ static int bcm2835_spi_prepare_sg(struct spi_master *master,
/* set callback for rx */
if (!is_tx) {
desc->callback = bcm2835_spi_dma_done;
- desc->callback_param = master;
+ desc->callback_param = ctlr;
}
/* submit it to DMA-engine */
@@ -543,27 +607,30 @@ static int bcm2835_spi_prepare_sg(struct spi_master *master,
return dma_submit_error(cookie);
}
-static int bcm2835_spi_transfer_one_dma(struct spi_master *master,
+static int bcm2835_spi_transfer_one_dma(struct spi_controller *ctlr,
struct spi_device *spi,
struct spi_transfer *tfr,
u32 cs)
{
- struct bcm2835_spi *bs = spi_master_get_devdata(master);
+ struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
int ret;
+ /* update usage statistics */
+ bs->count_transfer_dma++;
+
/*
* Transfer first few bytes without DMA if length of first TX or RX
* sglist entry is not a multiple of 4 bytes (hardware limitation).
*/
- bcm2835_spi_transfer_prologue(master, tfr, bs, cs);
+ bcm2835_spi_transfer_prologue(ctlr, tfr, bs, cs);
/* setup tx-DMA */
- ret = bcm2835_spi_prepare_sg(master, tfr, true);
+ ret = bcm2835_spi_prepare_sg(ctlr, tfr, true);
if (ret)
goto err_reset_hw;
/* start TX early */
- dma_async_issue_pending(master->dma_tx);
+ dma_async_issue_pending(ctlr->dma_tx);
/* mark as dma pending */
bs->dma_pending = 1;
@@ -579,27 +646,27 @@ static int bcm2835_spi_transfer_one_dma(struct spi_master *master,
* mapping of the rx buffers still takes place
* this saves 10us or more.
*/
- ret = bcm2835_spi_prepare_sg(master, tfr, false);
+ ret = bcm2835_spi_prepare_sg(ctlr, tfr, false);
if (ret) {
/* need to reset on errors */
- dmaengine_terminate_sync(master->dma_tx);
+ dmaengine_terminate_sync(ctlr->dma_tx);
bs->dma_pending = false;
goto err_reset_hw;
}
/* start rx dma late */
- dma_async_issue_pending(master->dma_rx);
+ dma_async_issue_pending(ctlr->dma_rx);
/* wait for wakeup in framework */
return 1;
err_reset_hw:
- bcm2835_spi_reset_hw(master);
+ bcm2835_spi_reset_hw(ctlr);
bcm2835_spi_undo_prologue(bs);
return ret;
}
-static bool bcm2835_spi_can_dma(struct spi_master *master,
+static bool bcm2835_spi_can_dma(struct spi_controller *ctlr,
struct spi_device *spi,
struct spi_transfer *tfr)
{
@@ -611,21 +678,21 @@ static bool bcm2835_spi_can_dma(struct spi_master *master,
return true;
}
-static void bcm2835_dma_release(struct spi_master *master)
+static void bcm2835_dma_release(struct spi_controller *ctlr)
{
- if (master->dma_tx) {
- dmaengine_terminate_sync(master->dma_tx);
- dma_release_channel(master->dma_tx);
- master->dma_tx = NULL;
+ if (ctlr->dma_tx) {
+ dmaengine_terminate_sync(ctlr->dma_tx);
+ dma_release_channel(ctlr->dma_tx);
+ ctlr->dma_tx = NULL;
}
- if (master->dma_rx) {
- dmaengine_terminate_sync(master->dma_rx);
- dma_release_channel(master->dma_rx);
- master->dma_rx = NULL;
+ if (ctlr->dma_rx) {
+ dmaengine_terminate_sync(ctlr->dma_rx);
+ dma_release_channel(ctlr->dma_rx);
+ ctlr->dma_rx = NULL;
}
}
-static void bcm2835_dma_init(struct spi_master *master, struct device *dev)
+static void bcm2835_dma_init(struct spi_controller *ctlr, struct device *dev)
{
struct dma_slave_config slave_config;
const __be32 *addr;
@@ -633,7 +700,7 @@ static void bcm2835_dma_init(struct spi_master *master, struct device *dev)
int ret;
/* base address in dma-space */
- addr = of_get_address(master->dev.of_node, 0, NULL, NULL);
+ addr = of_get_address(ctlr->dev.of_node, 0, NULL, NULL);
if (!addr) {
dev_err(dev, "could not get DMA-register address - not using dma mode\n");
goto err;
@@ -641,38 +708,36 @@ static void bcm2835_dma_init(struct spi_master *master, struct device *dev)
dma_reg_base = be32_to_cpup(addr);
/* get tx/rx dma */
- master->dma_tx = dma_request_slave_channel(dev, "tx");
- if (!master->dma_tx) {
+ ctlr->dma_tx = dma_request_slave_channel(dev, "tx");
+ if (!ctlr->dma_tx) {
dev_err(dev, "no tx-dma configuration found - not using dma mode\n");
goto err;
}
- master->dma_rx = dma_request_slave_channel(dev, "rx");
- if (!master->dma_rx) {
+ ctlr->dma_rx = dma_request_slave_channel(dev, "rx");
+ if (!ctlr->dma_rx) {
dev_err(dev, "no rx-dma configuration found - not using dma mode\n");
goto err_release;
}
/* configure DMAs */
- slave_config.direction = DMA_MEM_TO_DEV;
slave_config.dst_addr = (u32)(dma_reg_base + BCM2835_SPI_FIFO);
slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- ret = dmaengine_slave_config(master->dma_tx, &slave_config);
+ ret = dmaengine_slave_config(ctlr->dma_tx, &slave_config);
if (ret)
goto err_config;
- slave_config.direction = DMA_DEV_TO_MEM;
slave_config.src_addr = (u32)(dma_reg_base + BCM2835_SPI_FIFO);
slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- ret = dmaengine_slave_config(master->dma_rx, &slave_config);
+ ret = dmaengine_slave_config(ctlr->dma_rx, &slave_config);
if (ret)
goto err_config;
/* all went well, so set can_dma */
- master->can_dma = bcm2835_spi_can_dma;
+ ctlr->can_dma = bcm2835_spi_can_dma;
/* need to do TX AND RX DMA, so we need dummy buffers */
- master->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
+ ctlr->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
return;
@@ -680,20 +745,22 @@ static void bcm2835_dma_init(struct spi_master *master, struct device *dev)
dev_err(dev, "issue configuring dma: %d - not using DMA mode\n",
ret);
err_release:
- bcm2835_dma_release(master);
+ bcm2835_dma_release(ctlr);
err:
return;
}
-static int bcm2835_spi_transfer_one_poll(struct spi_master *master,
+static int bcm2835_spi_transfer_one_poll(struct spi_controller *ctlr,
struct spi_device *spi,
struct spi_transfer *tfr,
- u32 cs,
- unsigned long long xfer_time_us)
+ u32 cs)
{
- struct bcm2835_spi *bs = spi_master_get_devdata(master);
+ struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
unsigned long timeout;
+ /* update usage statistics */
+ bs->count_transfer_polling++;
+
/* enable HW block without interrupts */
bcm2835_wr(bs, BCM2835_SPI_CS, cs | BCM2835_SPI_CS_TA);
@@ -703,8 +770,8 @@ static int bcm2835_spi_transfer_one_poll(struct spi_master *master,
*/
bcm2835_wr_fifo_blind(bs, BCM2835_SPI_FIFO_SIZE);
- /* set the timeout */
- timeout = jiffies + BCM2835_SPI_POLLING_JIFFIES;
+ /* set the timeout to at least 2 jiffies */
+ timeout = jiffies + 2 + HZ * polling_limit_us / 1000000;
/* loop until finished the transfer */
while (bs->rx_len) {
@@ -723,25 +790,28 @@ static int bcm2835_spi_transfer_one_poll(struct spi_master *master,
jiffies - timeout,
bs->tx_len, bs->rx_len);
/* fall back to interrupt mode */
- return bcm2835_spi_transfer_one_irq(master, spi,
+
+ /* update usage statistics */
+ bs->count_transfer_irq_after_polling++;
+
+ return bcm2835_spi_transfer_one_irq(ctlr, spi,
tfr, cs, false);
}
}
/* Transfer complete - reset SPI HW */
- bcm2835_spi_reset_hw(master);
+ bcm2835_spi_reset_hw(ctlr);
/* and return without waiting for completion */
return 0;
}
-static int bcm2835_spi_transfer_one(struct spi_master *master,
+static int bcm2835_spi_transfer_one(struct spi_controller *ctlr,
struct spi_device *spi,
struct spi_transfer *tfr)
{
- struct bcm2835_spi *bs = spi_master_get_devdata(master);
- unsigned long spi_hz, clk_hz, cdiv;
- unsigned long spi_used_hz;
- unsigned long long xfer_time_us;
+ struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
+ unsigned long spi_hz, clk_hz, cdiv, spi_used_hz;
+ unsigned long hz_per_byte, byte_limit;
u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
/* set clock */
@@ -782,42 +852,49 @@ static int bcm2835_spi_transfer_one(struct spi_master *master,
bs->tx_len = tfr->len;
bs->rx_len = tfr->len;
- /* calculate the estimated time in us the transfer runs */
- xfer_time_us = (unsigned long long)tfr->len
- * 9 /* clocks/byte - SPI-HW waits 1 clock after each byte */
- * 1000000;
- do_div(xfer_time_us, spi_used_hz);
+ /* Calculate the estimated time in us the transfer runs. Note that
+ * there is 1 idle clocks cycles after each byte getting transferred
+ * so we have 9 cycles/byte. This is used to find the number of Hz
+ * per byte per polling limit. E.g., we can transfer 1 byte in 30 us
+ * per 300,000 Hz of bus clock.
+ */
+ hz_per_byte = polling_limit_us ? (9 * 1000000) / polling_limit_us : 0;
+ byte_limit = hz_per_byte ? spi_used_hz / hz_per_byte : 1;
- /* for short requests run polling*/
- if (xfer_time_us <= BCM2835_SPI_POLLING_LIMIT_US)
- return bcm2835_spi_transfer_one_poll(master, spi, tfr,
- cs, xfer_time_us);
+ /* run in polling mode for short transfers */
+ if (tfr->len < byte_limit)
+ return bcm2835_spi_transfer_one_poll(ctlr, spi, tfr, cs);
- /* run in dma mode if conditions are right */
- if (master->can_dma && bcm2835_spi_can_dma(master, spi, tfr))
- return bcm2835_spi_transfer_one_dma(master, spi, tfr, cs);
+ /* run in dma mode if conditions are right
+ * Note that unlike poll or interrupt mode DMA mode does not have
+ * this 1 idle clock cycle pattern but runs the spi clock without gaps
+ */
+ if (ctlr->can_dma && bcm2835_spi_can_dma(ctlr, spi, tfr))
+ return bcm2835_spi_transfer_one_dma(ctlr, spi, tfr, cs);
/* run in interrupt-mode */
- return bcm2835_spi_transfer_one_irq(master, spi, tfr, cs, true);
+ return bcm2835_spi_transfer_one_irq(ctlr, spi, tfr, cs, true);
}
-static int bcm2835_spi_prepare_message(struct spi_master *master,
+static int bcm2835_spi_prepare_message(struct spi_controller *ctlr,
struct spi_message *msg)
{
struct spi_device *spi = msg->spi;
- struct bcm2835_spi *bs = spi_master_get_devdata(master);
+ struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
int ret;
- /*
- * DMA transfers are limited to 16 bit (0 to 65535 bytes) by the SPI HW
- * due to DLEN. Split up transfers (32-bit FIFO aligned) if the limit is
- * exceeded.
- */
- ret = spi_split_transfers_maxsize(master, msg, 65532,
- GFP_KERNEL | GFP_DMA);
- if (ret)
- return ret;
+ if (ctlr->can_dma) {
+ /*
+ * DMA transfers are limited to 16 bit (0 to 65535 bytes) by
+ * the SPI HW due to DLEN. Split up transfers (32-bit FIFO
+ * aligned) if the limit is exceeded.
+ */
+ ret = spi_split_transfers_maxsize(ctlr, msg, 65532,
+ GFP_KERNEL | GFP_DMA);
+ if (ret)
+ return ret;
+ }
cs &= ~(BCM2835_SPI_CS_CPOL | BCM2835_SPI_CS_CPHA);
@@ -831,19 +908,19 @@ static int bcm2835_spi_prepare_message(struct spi_master *master,
return 0;
}
-static void bcm2835_spi_handle_err(struct spi_master *master,
+static void bcm2835_spi_handle_err(struct spi_controller *ctlr,
struct spi_message *msg)
{
- struct bcm2835_spi *bs = spi_master_get_devdata(master);
+ struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
/* if an error occurred and we have an active dma, then terminate */
if (cmpxchg(&bs->dma_pending, true, false)) {
- dmaengine_terminate_sync(master->dma_tx);
- dmaengine_terminate_sync(master->dma_rx);
+ dmaengine_terminate_sync(ctlr->dma_tx);
+ dmaengine_terminate_sync(ctlr->dma_rx);
bcm2835_spi_undo_prologue(bs);
}
/* and reset */
- bcm2835_spi_reset_hw(master);
+ bcm2835_spi_reset_hw(ctlr);
}
static int chip_match_name(struct gpio_chip *chip, void *data)
@@ -900,85 +977,88 @@ static int bcm2835_spi_setup(struct spi_device *spi)
static int bcm2835_spi_probe(struct platform_device *pdev)
{
- struct spi_master *master;
+ struct spi_controller *ctlr;
struct bcm2835_spi *bs;
struct resource *res;
int err;
- master = spi_alloc_master(&pdev->dev, sizeof(*bs));
- if (!master) {
- dev_err(&pdev->dev, "spi_alloc_master() failed\n");
+ ctlr = spi_alloc_master(&pdev->dev, sizeof(*bs));
+ if (!ctlr)
return -ENOMEM;
- }
- platform_set_drvdata(pdev, master);
+ platform_set_drvdata(pdev, ctlr);
- master->mode_bits = BCM2835_SPI_MODE_BITS;
- master->bits_per_word_mask = SPI_BPW_MASK(8);
- master->num_chipselect = 3;
- master->setup = bcm2835_spi_setup;
- master->transfer_one = bcm2835_spi_transfer_one;
- master->handle_err = bcm2835_spi_handle_err;
- master->prepare_message = bcm2835_spi_prepare_message;
- master->dev.of_node = pdev->dev.of_node;
+ ctlr->mode_bits = BCM2835_SPI_MODE_BITS;
+ ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
+ ctlr->num_chipselect = 3;
+ ctlr->setup = bcm2835_spi_setup;
+ ctlr->transfer_one = bcm2835_spi_transfer_one;
+ ctlr->handle_err = bcm2835_spi_handle_err;
+ ctlr->prepare_message = bcm2835_spi_prepare_message;
+ ctlr->dev.of_node = pdev->dev.of_node;
- bs = spi_master_get_devdata(master);
+ bs = spi_controller_get_devdata(ctlr);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
bs->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(bs->regs)) {
err = PTR_ERR(bs->regs);
- goto out_master_put;
+ goto out_controller_put;
}
bs->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(bs->clk)) {
err = PTR_ERR(bs->clk);
dev_err(&pdev->dev, "could not get clk: %d\n", err);
- goto out_master_put;
+ goto out_controller_put;
}
bs->irq = platform_get_irq(pdev, 0);
if (bs->irq <= 0) {
dev_err(&pdev->dev, "could not get IRQ: %d\n", bs->irq);
err = bs->irq ? bs->irq : -ENODEV;
- goto out_master_put;
+ goto out_controller_put;
}
clk_prepare_enable(bs->clk);
- bcm2835_dma_init(master, &pdev->dev);
+ bcm2835_dma_init(ctlr, &pdev->dev);
/* initialise the hardware with the default polarities */
bcm2835_wr(bs, BCM2835_SPI_CS,
BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0,
- dev_name(&pdev->dev), master);
+ dev_name(&pdev->dev), ctlr);
if (err) {
dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
goto out_clk_disable;
}
- err = devm_spi_register_master(&pdev->dev, master);
+ err = devm_spi_register_controller(&pdev->dev, ctlr);
if (err) {
- dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
+ dev_err(&pdev->dev, "could not register SPI controller: %d\n",
+ err);
goto out_clk_disable;
}
+ bcm2835_debugfs_create(bs, dev_name(&pdev->dev));
+
return 0;
out_clk_disable:
clk_disable_unprepare(bs->clk);
-out_master_put:
- spi_master_put(master);
+out_controller_put:
+ spi_controller_put(ctlr);
return err;
}
static int bcm2835_spi_remove(struct platform_device *pdev)
{
- struct spi_master *master = platform_get_drvdata(pdev);
- struct bcm2835_spi *bs = spi_master_get_devdata(master);
+ struct spi_controller *ctlr = platform_get_drvdata(pdev);
+ struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
+
+ bcm2835_debugfs_remove(bs);
/* Clear FIFOs, and disable the HW block */
bcm2835_wr(bs, BCM2835_SPI_CS,
@@ -986,7 +1066,7 @@ static int bcm2835_spi_remove(struct platform_device *pdev)
clk_disable_unprepare(bs->clk);
- bcm2835_dma_release(master);
+ bcm2835_dma_release(ctlr);
return 0;
}
diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c
index 40dfb7f58efec56618c621cfe90adeea95033126..bb57035c5770381e58d53133571f1350b0249d37 100644
--- a/drivers/spi/spi-bcm2835aux.c
+++ b/drivers/spi/spi-bcm2835aux.c
@@ -496,10 +496,8 @@ static int bcm2835aux_spi_probe(struct platform_device *pdev)
int err;
master = spi_alloc_master(&pdev->dev, sizeof(*bs));
- if (!master) {
- dev_err(&pdev->dev, "spi_alloc_master() failed\n");
+ if (!master)
return -ENOMEM;
- }
platform_set_drvdata(pdev, master);
master->mode_bits = (SPI_CPOL | SPI_CS_HIGH | SPI_NO_CS);
diff --git a/drivers/spi/spi-meson-spifc.c b/drivers/spi/spi-meson-spifc.c
index ea4b1bf0fa1662647517dceb3b5920c9c4924fa2..f7fe9b13d122db67389c055d9909a84d46c9f9bd 100644
--- a/drivers/spi/spi-meson-spifc.c
+++ b/drivers/spi/spi-meson-spifc.c
@@ -1,9 +1,9 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Driver for Amlogic Meson SPI flash controller (SPIFC)
- *
- * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Driver for Amlogic Meson SPI flash controller (SPIFC)
+//
+// Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
+//
#include <linux/clk.h>
#include <linux/delay.h>
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 10041eab36a235d1e35e91c5d207a28890934c84..45d8a7048b6c684688a85318f55174ad7de658d1 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -123,8 +123,6 @@ static const struct mtk_spi_compatible mt8183_compat = {
* supplies it.
*/
static const struct mtk_chip_config mtk_default_chip_info = {
- .rx_mlsb = 1,
- .tx_mlsb = 1,
.cs_pol = 0,
.sample_sel = 0,
};
@@ -195,14 +193,13 @@ static int mtk_spi_prepare_message(struct spi_master *master,
reg_val &= ~SPI_CMD_CPOL;
/* set the mlsbx and mlsbtx */
- if (chip_config->tx_mlsb)
- reg_val |= SPI_CMD_TXMSBF;
- else
+ if (spi->mode & SPI_LSB_FIRST) {
reg_val &= ~SPI_CMD_TXMSBF;
- if (chip_config->rx_mlsb)
- reg_val |= SPI_CMD_RXMSBF;
- else
reg_val &= ~SPI_CMD_RXMSBF;
+ } else {
+ reg_val |= SPI_CMD_TXMSBF;
+ reg_val |= SPI_CMD_RXMSBF;
+ }
/* set the tx/rx endian */
#ifdef __LITTLE_ENDIAN
@@ -599,7 +596,7 @@ static int mtk_spi_probe(struct platform_device *pdev)
master->auto_runtime_pm = true;
master->dev.of_node = pdev->dev.of_node;
- master->mode_bits = SPI_CPOL | SPI_CPHA;
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
master->set_cs = mtk_spi_set_cs;
master->prepare_message = mtk_spi_prepare_message;
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index af3f37ba82c83f26e37c8c93708992734a33c320..fc7ab4b2688023b215c273bb8c65cad13533f5f0 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1437,6 +1437,10 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = {
{ PCI_VDEVICE(INTEL, 0x34aa), LPSS_CNL_SSP },
{ PCI_VDEVICE(INTEL, 0x34ab), LPSS_CNL_SSP },
{ PCI_VDEVICE(INTEL, 0x34fb), LPSS_CNL_SSP },
+ /* EHL */
+ { PCI_VDEVICE(INTEL, 0x4b2a), LPSS_BXT_SSP },
+ { PCI_VDEVICE(INTEL, 0x4b2b), LPSS_BXT_SSP },
+ { PCI_VDEVICE(INTEL, 0x4b37), LPSS_BXT_SSP },
/* APL */
{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },
@@ -1704,6 +1708,16 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
goto out_error_dma_irq_alloc;
controller->max_speed_hz = clk_get_rate(ssp->clk);
+ /*
+ * Set minimum speed for all other platforms than Intel Quark which is
+ * able do under 1 Hz transfers.
+ */
+ if (!pxa25x_ssp_comp(drv_data))
+ controller->min_speed_hz =
+ DIV_ROUND_UP(controller->max_speed_hz, 4096);
+ else if (!is_quark_x1000_ssp(drv_data))
+ controller->min_speed_hz =
+ DIV_ROUND_UP(controller->max_speed_hz, 512);
/* Load default SSP configuration */
pxa2xx_spi_write(drv_data, SSCR0, 0);
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index f22dbb4b87a56dad466bb42a4c3cb7a954e08649..2f559e5311002c16f6b549318a679f4f79887a09 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -273,6 +273,9 @@ static void spi_qup_read(struct spi_qup *controller, u32 *opflags)
writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
controller->base + QUP_OPERATIONAL);
+ if (!remainder)
+ goto exit;
+
if (is_block_mode) {
num_words = (remainder > words_per_block) ?
words_per_block : remainder;
@@ -302,11 +305,13 @@ static void spi_qup_read(struct spi_qup *controller, u32 *opflags)
* to refresh opflags value because MAX_INPUT_DONE_FLAG may now be
* present and this is used to determine if transaction is complete
*/
- *opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
- if (is_block_mode && *opflags & QUP_OP_MAX_INPUT_DONE_FLAG)
- writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
- controller->base + QUP_OPERATIONAL);
-
+exit:
+ if (!remainder) {
+ *opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
+ if (is_block_mode && *opflags & QUP_OP_MAX_INPUT_DONE_FLAG)
+ writel_relaxed(QUP_OP_IN_SERVICE_FLAG,
+ controller->base + QUP_OPERATIONAL);
+ }
}
static void spi_qup_write_to_fifo(struct spi_qup *controller, u32 num_words)
@@ -354,6 +359,10 @@ static void spi_qup_write(struct spi_qup *controller)
writel_relaxed(QUP_OP_OUT_SERVICE_FLAG,
controller->base + QUP_OPERATIONAL);
+ /* make sure the interrupt is valid */
+ if (!remainder)
+ return;
+
if (is_block_mode) {
num_words = (remainder > words_per_block) ?
words_per_block : remainder;
@@ -567,10 +576,24 @@ static int spi_qup_do_pio(struct spi_device *spi, struct spi_transfer *xfer,
return 0;
}
+static bool spi_qup_data_pending(struct spi_qup *controller)
+{
+ unsigned int remainder_tx, remainder_rx;
+
+ remainder_tx = DIV_ROUND_UP(spi_qup_len(controller) -
+ controller->tx_bytes, controller->w_size);
+
+ remainder_rx = DIV_ROUND_UP(spi_qup_len(controller) -
+ controller->rx_bytes, controller->w_size);
+
+ return remainder_tx || remainder_rx;
+}
+
static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
{
struct spi_qup *controller = dev_id;
u32 opflags, qup_err, spi_err;
+ unsigned long flags;
int error = 0;
qup_err = readl_relaxed(controller->base + QUP_ERROR_FLAGS);
@@ -602,6 +625,11 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
error = -EIO;
}
+ spin_lock_irqsave(&controller->lock, flags);
+ if (!controller->error)
+ controller->error = error;
+ spin_unlock_irqrestore(&controller->lock, flags);
+
if (spi_qup_is_dma_xfer(controller->mode)) {
writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
} else {
@@ -610,10 +638,21 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
if (opflags & QUP_OP_OUT_SERVICE_FLAG)
spi_qup_write(controller);
+
+ if (!spi_qup_data_pending(controller))
+ complete(&controller->done);
}
- if ((opflags & QUP_OP_MAX_INPUT_DONE_FLAG) || error)
+ if (error)
+ complete(&controller->done);
+
+ if (opflags & QUP_OP_MAX_INPUT_DONE_FLAG) {
+ if (!spi_qup_is_dma_xfer(controller->mode)) {
+ if (spi_qup_data_pending(controller))
+ return IRQ_HANDLED;
+ }
complete(&controller->done);
+ }
return IRQ_HANDLED;
}
@@ -834,10 +873,6 @@ static int spi_qup_transfer_one(struct spi_master *master,
else
ret = spi_qup_do_pio(spi, xfer, timeout);
- if (ret)
- goto exit;
-
-exit:
spi_qup_set_state(controller, QUP_STATE_RESET);
spin_lock_irqsave(&controller->lock, flags);
if (!ret)
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 9b91188a85f96d12ecc5bbc18de370373d153f8c..2cc6d9951b52e7c994ce3bb676b4c2a4d68e10b9 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -417,7 +417,7 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs,
.direction = DMA_MEM_TO_DEV,
.dst_addr = rs->dma_addr_tx,
.dst_addr_width = rs->n_bytes,
- .dst_maxburst = rs->fifo_len / 2,
+ .dst_maxburst = rs->fifo_len / 4,
};
dmaengine_slave_config(master->dma_tx, &txconf);
@@ -518,7 +518,7 @@ static void rockchip_spi_config(struct rockchip_spi *rs,
else
writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_RXFTLR);
- writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_DMATDLR);
+ writel_relaxed(rs->fifo_len / 2, rs->regs + ROCKCHIP_SPI_DMATDLR);
writel_relaxed(0, rs->regs + ROCKCHIP_SPI_DMARDLR);
writel_relaxed(dmacr, rs->regs + ROCKCHIP_SPI_DMACR);
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 6aab7b2136dbcadcce196195a6ed98676be3d4a1..b50bdbc27e5899cc906255f31f32df21446e012e 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -229,7 +229,7 @@ static int sh_msiof_modify_ctr_wait(struct sh_msiof_spi_priv *p,
sh_msiof_write(p, CTR, data);
return readl_poll_timeout_atomic(p->mapbase + CTR, data,
- (data & mask) == set, 10, 1000);
+ (data & mask) == set, 1, 100);
}
static irqreturn_t sh_msiof_spi_irq(int irq, void *data)
diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 42f8e3c6aa1ff15d03a30cd6bdd040aba0f6000b..655e4afbfb2a185932dda13722ae9c8e13931054 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -29,7 +29,7 @@
#define CR_SSHIFT BIT(4)
#define CR_DFM BIT(6)
#define CR_FSEL BIT(7)
-#define CR_FTHRES_MASK GENMASK(12, 8)
+#define CR_FTHRES_SHIFT 8
#define CR_TEIE BIT(16)
#define CR_TCIE BIT(17)
#define CR_FTIE BIT(18)
@@ -245,12 +245,8 @@ static int stm32_qspi_tx_dma(struct stm32_qspi *qspi,
writel_relaxed(cr | CR_DMAEN, qspi->io_base + QSPI_CR);
t_out = sgt.nents * STM32_COMP_TIMEOUT_MS;
- if (!wait_for_completion_interruptible_timeout(&qspi->dma_completion,
- msecs_to_jiffies(t_out)))
- err = -ETIMEDOUT;
-
- if (dma_async_is_tx_complete(dma_ch, cookie,
- NULL, NULL) != DMA_COMPLETE)
+ if (!wait_for_completion_timeout(&qspi->dma_completion,
+ msecs_to_jiffies(t_out)))
err = -ETIMEDOUT;
if (err)
@@ -304,7 +300,7 @@ static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi,
cr = readl_relaxed(qspi->io_base + QSPI_CR);
writel_relaxed(cr | CR_TCIE | CR_TEIE, qspi->io_base + QSPI_CR);
- if (!wait_for_completion_interruptible_timeout(&qspi->data_completion,
+ if (!wait_for_completion_timeout(&qspi->data_completion,
msecs_to_jiffies(STM32_COMP_TIMEOUT_MS))) {
err = -ETIMEDOUT;
} else {
@@ -463,7 +459,7 @@ static int stm32_qspi_setup(struct spi_device *spi)
flash->presc = presc;
mutex_lock(&qspi->lock);
- qspi->cr_reg = FIELD_PREP(CR_FTHRES_MASK, 3) | CR_SSHIFT | CR_EN;
+ qspi->cr_reg = 3 << CR_FTHRES_SHIFT | CR_SSHIFT | CR_EN;
writel_relaxed(qspi->cr_reg, qspi->io_base + QSPI_CR);
/* set dcr fsize to max address */
diff --git a/drivers/spi/spi-synquacer.c b/drivers/spi/spi-synquacer.c
new file mode 100644
index 0000000000000000000000000000000000000000..f99abd85c50a62e6590b7ce194303b73afef0f91
--- /dev/null
+++ b/drivers/spi/spi-synquacer.c
@@ -0,0 +1,828 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Synquacer HSSPI controller driver
+//
+// Copyright (c) 2015-2018 Socionext Inc.
+// Copyright (c) 2018-2019 Linaro Ltd.
+//
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+
+/* HSSPI register address definitions */
+#define SYNQUACER_HSSPI_REG_MCTRL 0x00
+#define SYNQUACER_HSSPI_REG_PCC0 0x04
+#define SYNQUACER_HSSPI_REG_PCC(n) (SYNQUACER_HSSPI_REG_PCC0 + (n) * 4)
+#define SYNQUACER_HSSPI_REG_TXF 0x14
+#define SYNQUACER_HSSPI_REG_TXE 0x18
+#define SYNQUACER_HSSPI_REG_TXC 0x1C
+#define SYNQUACER_HSSPI_REG_RXF 0x20
+#define SYNQUACER_HSSPI_REG_RXE 0x24
+#define SYNQUACER_HSSPI_REG_RXC 0x28
+#define SYNQUACER_HSSPI_REG_FAULTF 0x2C
+#define SYNQUACER_HSSPI_REG_FAULTC 0x30
+#define SYNQUACER_HSSPI_REG_DMCFG 0x34
+#define SYNQUACER_HSSPI_REG_DMSTART 0x38
+#define SYNQUACER_HSSPI_REG_DMBCC 0x3C
+#define SYNQUACER_HSSPI_REG_DMSTATUS 0x40
+#define SYNQUACER_HSSPI_REG_FIFOCFG 0x4C
+#define SYNQUACER_HSSPI_REG_TX_FIFO 0x50
+#define SYNQUACER_HSSPI_REG_RX_FIFO 0x90
+#define SYNQUACER_HSSPI_REG_MID 0xFC
+
+/* HSSPI register bit definitions */
+#define SYNQUACER_HSSPI_MCTRL_MEN BIT(0)
+#define SYNQUACER_HSSPI_MCTRL_COMMAND_SEQUENCE_EN BIT(1)
+#define SYNQUACER_HSSPI_MCTRL_CDSS BIT(3)
+#define SYNQUACER_HSSPI_MCTRL_MES BIT(4)
+#define SYNQUACER_HSSPI_MCTRL_SYNCON BIT(5)
+
+#define SYNQUACER_HSSPI_PCC_CPHA BIT(0)
+#define SYNQUACER_HSSPI_PCC_CPOL BIT(1)
+#define SYNQUACER_HSSPI_PCC_ACES BIT(2)
+#define SYNQUACER_HSSPI_PCC_RTM BIT(3)
+#define SYNQUACER_HSSPI_PCC_SSPOL BIT(4)
+#define SYNQUACER_HSSPI_PCC_SDIR BIT(7)
+#define SYNQUACER_HSSPI_PCC_SENDIAN BIT(8)
+#define SYNQUACER_HSSPI_PCC_SAFESYNC BIT(16)
+#define SYNQUACER_HSSPI_PCC_SS2CD_SHIFT 5U
+#define SYNQUACER_HSSPI_PCC_CDRS_MASK 0x7f
+#define SYNQUACER_HSSPI_PCC_CDRS_SHIFT 9U
+
+#define SYNQUACER_HSSPI_TXF_FIFO_FULL BIT(0)
+#define SYNQUACER_HSSPI_TXF_FIFO_EMPTY BIT(1)
+#define SYNQUACER_HSSPI_TXF_SLAVE_RELEASED BIT(6)
+
+#define SYNQUACER_HSSPI_TXE_FIFO_FULL BIT(0)
+#define SYNQUACER_HSSPI_TXE_FIFO_EMPTY BIT(1)
+#define SYNQUACER_HSSPI_TXE_SLAVE_RELEASED BIT(6)
+
+#define SYNQUACER_HSSPI_RXF_FIFO_MORE_THAN_THRESHOLD BIT(5)
+#define SYNQUACER_HSSPI_RXF_SLAVE_RELEASED BIT(6)
+
+#define SYNQUACER_HSSPI_RXE_FIFO_MORE_THAN_THRESHOLD BIT(5)
+#define SYNQUACER_HSSPI_RXE_SLAVE_RELEASED BIT(6)
+
+#define SYNQUACER_HSSPI_DMCFG_SSDC BIT(1)
+#define SYNQUACER_HSSPI_DMCFG_MSTARTEN BIT(2)
+
+#define SYNQUACER_HSSPI_DMSTART_START BIT(0)
+#define SYNQUACER_HSSPI_DMSTOP_STOP BIT(8)
+#define SYNQUACER_HSSPI_DMPSEL_CS_MASK 0x3
+#define SYNQUACER_HSSPI_DMPSEL_CS_SHIFT 16U
+#define SYNQUACER_HSSPI_DMTRP_BUS_WIDTH_SHIFT 24U
+#define SYNQUACER_HSSPI_DMTRP_DATA_MASK 0x3
+#define SYNQUACER_HSSPI_DMTRP_DATA_SHIFT 26U
+#define SYNQUACER_HSSPI_DMTRP_DATA_TXRX 0
+#define SYNQUACER_HSSPI_DMTRP_DATA_RX 1
+#define SYNQUACER_HSSPI_DMTRP_DATA_TX 2
+
+#define SYNQUACER_HSSPI_DMSTATUS_RX_DATA_MASK 0x1f
+#define SYNQUACER_HSSPI_DMSTATUS_RX_DATA_SHIFT 8U
+#define SYNQUACER_HSSPI_DMSTATUS_TX_DATA_MASK 0x1f
+#define SYNQUACER_HSSPI_DMSTATUS_TX_DATA_SHIFT 16U
+
+#define SYNQUACER_HSSPI_FIFOCFG_RX_THRESHOLD_MASK 0xf
+#define SYNQUACER_HSSPI_FIFOCFG_RX_THRESHOLD_SHIFT 0U
+#define SYNQUACER_HSSPI_FIFOCFG_TX_THRESHOLD_MASK 0xf
+#define SYNQUACER_HSSPI_FIFOCFG_TX_THRESHOLD_SHIFT 4U
+#define SYNQUACER_HSSPI_FIFOCFG_FIFO_WIDTH_MASK 0x3
+#define SYNQUACER_HSSPI_FIFOCFG_FIFO_WIDTH_SHIFT 8U
+#define SYNQUACER_HSSPI_FIFOCFG_RX_FLUSH BIT(11)
+#define SYNQUACER_HSSPI_FIFOCFG_TX_FLUSH BIT(12)
+
+#define SYNQUACER_HSSPI_FIFO_DEPTH 16U
+#define SYNQUACER_HSSPI_FIFO_TX_THRESHOLD 4U
+#define SYNQUACER_HSSPI_FIFO_RX_THRESHOLD \
+ (SYNQUACER_HSSPI_FIFO_DEPTH - SYNQUACER_HSSPI_FIFO_TX_THRESHOLD)
+
+#define SYNQUACER_HSSPI_TRANSFER_MODE_TX BIT(1)
+#define SYNQUACER_HSSPI_TRANSFER_MODE_RX BIT(2)
+#define SYNQUACER_HSSPI_TRANSFER_TMOUT_MSEC 2000U
+#define SYNQUACER_HSSPI_ENABLE_TMOUT_MSEC 1000U
+
+#define SYNQUACER_HSSPI_CLOCK_SRC_IHCLK 0
+#define SYNQUACER_HSSPI_CLOCK_SRC_IPCLK 1
+
+#define SYNQUACER_HSSPI_NUM_CHIP_SELECT 4U
+#define SYNQUACER_HSSPI_IRQ_NAME_MAX 32U
+
+struct synquacer_spi {
+ struct device *dev;
+ struct completion transfer_done;
+ unsigned int cs;
+ unsigned int bpw;
+ unsigned int mode;
+ unsigned int speed;
+ bool aces, rtm;
+ void *rx_buf;
+ const void *tx_buf;
+ struct clk *clk;
+ int clk_src_type;
+ void __iomem *regs;
+ u32 tx_words, rx_words;
+ unsigned int bus_width;
+ unsigned int transfer_mode;
+ char rx_irq_name[SYNQUACER_HSSPI_IRQ_NAME_MAX];
+ char tx_irq_name[SYNQUACER_HSSPI_IRQ_NAME_MAX];
+};
+
+static int read_fifo(struct synquacer_spi *sspi)
+{
+ u32 len = readl(sspi->regs + SYNQUACER_HSSPI_REG_DMSTATUS);
+
+ len = (len >> SYNQUACER_HSSPI_DMSTATUS_RX_DATA_SHIFT) &
+ SYNQUACER_HSSPI_DMSTATUS_RX_DATA_MASK;
+ len = min(len, sspi->rx_words);
+
+ switch (sspi->bpw) {
+ case 8: {
+ u8 *buf = sspi->rx_buf;
+
+ ioread8_rep(sspi->regs + SYNQUACER_HSSPI_REG_RX_FIFO,
+ buf, len);
+ sspi->rx_buf = buf + len;
+ break;
+ }
+ case 16: {
+ u16 *buf = sspi->rx_buf;
+
+ ioread16_rep(sspi->regs + SYNQUACER_HSSPI_REG_RX_FIFO,
+ buf, len);
+ sspi->rx_buf = buf + len;
+ break;
+ }
+ case 24:
+ /* fallthrough, should use 32-bits access */
+ case 32: {
+ u32 *buf = sspi->rx_buf;
+
+ ioread32_rep(sspi->regs + SYNQUACER_HSSPI_REG_RX_FIFO,
+ buf, len);
+ sspi->rx_buf = buf + len;
+ break;
+ }
+ default:
+ return -EINVAL;
+ }
+
+ sspi->rx_words -= len;
+ return 0;
+}
+
+static int write_fifo(struct synquacer_spi *sspi)
+{
+ u32 len = readl(sspi->regs + SYNQUACER_HSSPI_REG_DMSTATUS);
+
+ len = (len >> SYNQUACER_HSSPI_DMSTATUS_TX_DATA_SHIFT) &
+ SYNQUACER_HSSPI_DMSTATUS_TX_DATA_MASK;
+ len = min(SYNQUACER_HSSPI_FIFO_DEPTH - len,
+ sspi->tx_words);
+
+ switch (sspi->bpw) {
+ case 8: {
+ const u8 *buf = sspi->tx_buf;
+
+ iowrite8_rep(sspi->regs + SYNQUACER_HSSPI_REG_TX_FIFO,
+ buf, len);
+ sspi->tx_buf = buf + len;
+ break;
+ }
+ case 16: {
+ const u16 *buf = sspi->tx_buf;
+
+ iowrite16_rep(sspi->regs + SYNQUACER_HSSPI_REG_TX_FIFO,
+ buf, len);
+ sspi->tx_buf = buf + len;
+ break;
+ }
+ case 24:
+ /* fallthrough, should use 32-bits access */
+ case 32: {
+ const u32 *buf = sspi->tx_buf;
+
+ iowrite32_rep(sspi->regs + SYNQUACER_HSSPI_REG_TX_FIFO,
+ buf, len);
+ sspi->tx_buf = buf + len;
+ break;
+ }
+ default:
+ return -EINVAL;
+ }
+
+ sspi->tx_words -= len;
+ return 0;
+}
+
+static int synquacer_spi_config(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct synquacer_spi *sspi = spi_master_get_devdata(master);
+ unsigned int speed, mode, bpw, cs, bus_width, transfer_mode;
+ u32 rate, val, div;
+
+ /* Full Duplex only on 1-bit wide bus */
+ if (xfer->rx_buf && xfer->tx_buf &&
+ (xfer->rx_nbits != 1 || xfer->tx_nbits != 1)) {
+ dev_err(sspi->dev,
+ "RX and TX bus widths must be 1-bit for Full-Duplex!\n");
+ return -EINVAL;
+ }
+
+ if (xfer->tx_buf) {
+ bus_width = xfer->tx_nbits;
+ transfer_mode = SYNQUACER_HSSPI_TRANSFER_MODE_TX;
+ } else {
+ bus_width = xfer->rx_nbits;
+ transfer_mode = SYNQUACER_HSSPI_TRANSFER_MODE_RX;
+ }
+
+ mode = spi->mode;
+ cs = spi->chip_select;
+ speed = xfer->speed_hz;
+ bpw = xfer->bits_per_word;
+
+ /* return if nothing to change */
+ if (speed == sspi->speed &&
+ bus_width == sspi->bus_width && bpw == sspi->bpw &&
+ mode == sspi->mode && cs == sspi->cs &&
+ transfer_mode == sspi->transfer_mode) {
+ return 0;
+ }
+
+ sspi->transfer_mode = transfer_mode;
+ rate = master->max_speed_hz;
+
+ div = DIV_ROUND_UP(rate, speed);
+ if (div > 254) {
+ dev_err(sspi->dev, "Requested rate too low (%u)\n",
+ sspi->speed);
+ return -EINVAL;
+ }
+
+ val = readl(sspi->regs + SYNQUACER_HSSPI_REG_PCC(cs));
+ val &= ~SYNQUACER_HSSPI_PCC_SAFESYNC;
+ if (bpw == 8 && (mode & (SPI_TX_DUAL | SPI_RX_DUAL)) && div < 3)
+ val |= SYNQUACER_HSSPI_PCC_SAFESYNC;
+ if (bpw == 8 && (mode & (SPI_TX_QUAD | SPI_RX_QUAD)) && div < 6)
+ val |= SYNQUACER_HSSPI_PCC_SAFESYNC;
+ if (bpw == 16 && (mode & (SPI_TX_QUAD | SPI_RX_QUAD)) && div < 3)
+ val |= SYNQUACER_HSSPI_PCC_SAFESYNC;
+
+ if (mode & SPI_CPHA)
+ val |= SYNQUACER_HSSPI_PCC_CPHA;
+ else
+ val &= ~SYNQUACER_HSSPI_PCC_CPHA;
+
+ if (mode & SPI_CPOL)
+ val |= SYNQUACER_HSSPI_PCC_CPOL;
+ else
+ val &= ~SYNQUACER_HSSPI_PCC_CPOL;
+
+ if (mode & SPI_CS_HIGH)
+ val |= SYNQUACER_HSSPI_PCC_SSPOL;
+ else
+ val &= ~SYNQUACER_HSSPI_PCC_SSPOL;
+
+ if (mode & SPI_LSB_FIRST)
+ val |= SYNQUACER_HSSPI_PCC_SDIR;
+ else
+ val &= ~SYNQUACER_HSSPI_PCC_SDIR;
+
+ if (sspi->aces)
+ val |= SYNQUACER_HSSPI_PCC_ACES;
+ else
+ val &= ~SYNQUACER_HSSPI_PCC_ACES;
+
+ if (sspi->rtm)
+ val |= SYNQUACER_HSSPI_PCC_RTM;
+ else
+ val &= ~SYNQUACER_HSSPI_PCC_RTM;
+
+ val |= (3 << SYNQUACER_HSSPI_PCC_SS2CD_SHIFT);
+ val |= SYNQUACER_HSSPI_PCC_SENDIAN;
+
+ val &= ~(SYNQUACER_HSSPI_PCC_CDRS_MASK <<
+ SYNQUACER_HSSPI_PCC_CDRS_SHIFT);
+ val |= ((div >> 1) << SYNQUACER_HSSPI_PCC_CDRS_SHIFT);
+
+ writel(val, sspi->regs + SYNQUACER_HSSPI_REG_PCC(cs));
+
+ val = readl(sspi->regs + SYNQUACER_HSSPI_REG_FIFOCFG);
+ val &= ~(SYNQUACER_HSSPI_FIFOCFG_FIFO_WIDTH_MASK <<
+ SYNQUACER_HSSPI_FIFOCFG_FIFO_WIDTH_SHIFT);
+ val |= ((bpw / 8 - 1) << SYNQUACER_HSSPI_FIFOCFG_FIFO_WIDTH_SHIFT);
+ writel(val, sspi->regs + SYNQUACER_HSSPI_REG_FIFOCFG);
+
+ val = readl(sspi->regs + SYNQUACER_HSSPI_REG_DMSTART);
+ val &= ~(SYNQUACER_HSSPI_DMTRP_DATA_MASK <<
+ SYNQUACER_HSSPI_DMTRP_DATA_SHIFT);
+
+ if (xfer->rx_buf)
+ val |= (SYNQUACER_HSSPI_DMTRP_DATA_RX <<
+ SYNQUACER_HSSPI_DMTRP_DATA_SHIFT);
+ else
+ val |= (SYNQUACER_HSSPI_DMTRP_DATA_TX <<
+ SYNQUACER_HSSPI_DMTRP_DATA_SHIFT);
+
+ val &= ~(3 << SYNQUACER_HSSPI_DMTRP_BUS_WIDTH_SHIFT);
+ val |= ((bus_width >> 1) << SYNQUACER_HSSPI_DMTRP_BUS_WIDTH_SHIFT);
+ writel(val, sspi->regs + SYNQUACER_HSSPI_REG_DMSTART);
+
+ sspi->bpw = bpw;
+ sspi->mode = mode;
+ sspi->speed = speed;
+ sspi->cs = spi->chip_select;
+ sspi->bus_width = bus_width;
+
+ return 0;
+}
+
+static int synquacer_spi_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct synquacer_spi *sspi = spi_master_get_devdata(master);
+ int ret;
+ int status = 0;
+ u32 words;
+ u8 bpw;
+ u32 val;
+
+ val = readl(sspi->regs + SYNQUACER_HSSPI_REG_DMSTART);
+ val &= ~SYNQUACER_HSSPI_DMSTOP_STOP;
+ writel(val, sspi->regs + SYNQUACER_HSSPI_REG_DMSTART);
+
+ val = readl(sspi->regs + SYNQUACER_HSSPI_REG_FIFOCFG);
+ val |= SYNQUACER_HSSPI_FIFOCFG_RX_FLUSH;
+ val |= SYNQUACER_HSSPI_FIFOCFG_TX_FLUSH;
+ writel(val, sspi->regs + SYNQUACER_HSSPI_REG_FIFOCFG);
+
+ /*
+ * See if we can transfer 4-bytes as 1 word
+ * to maximize the FIFO buffer efficiency.
+ */
+ bpw = xfer->bits_per_word;
+ if (bpw == 8 && !(xfer->len % 4) && !(spi->mode & SPI_LSB_FIRST))
+ xfer->bits_per_word = 32;
+
+ ret = synquacer_spi_config(master, spi, xfer);
+
+ /* restore */
+ xfer->bits_per_word = bpw;
+
+ if (ret)
+ return ret;
+
+ reinit_completion(&sspi->transfer_done);
+
+ sspi->tx_buf = xfer->tx_buf;
+ sspi->rx_buf = xfer->rx_buf;
+
+ switch (sspi->bpw) {
+ case 8:
+ words = xfer->len;
+ break;
+ case 16:
+ words = xfer->len / 2;
+ break;
+ case 24:
+ /* fallthrough, should use 32-bits access */
+ case 32:
+ words = xfer->len / 4;
+ break;
+ default:
+ dev_err(sspi->dev, "unsupported bpw: %d\n", sspi->bpw);
+ return -EINVAL;
+ }
+
+ if (xfer->tx_buf)
+ sspi->tx_words = words;
+ else
+ sspi->tx_words = 0;
+
+ if (xfer->rx_buf)
+ sspi->rx_words = words;
+ else
+ sspi->rx_words = 0;
+
+ if (xfer->tx_buf) {
+ status = write_fifo(sspi);
+ if (status < 0) {
+ dev_err(sspi->dev, "failed write_fifo. status: 0x%x\n",
+ status);
+ return status;
+ }
+ }
+
+ if (xfer->rx_buf) {
+ val = readl(sspi->regs + SYNQUACER_HSSPI_REG_FIFOCFG);
+ val &= ~(SYNQUACER_HSSPI_FIFOCFG_RX_THRESHOLD_MASK <<
+ SYNQUACER_HSSPI_FIFOCFG_RX_THRESHOLD_SHIFT);
+ val |= ((sspi->rx_words > SYNQUACER_HSSPI_FIFO_DEPTH ?
+ SYNQUACER_HSSPI_FIFO_RX_THRESHOLD : sspi->rx_words) <<
+ SYNQUACER_HSSPI_FIFOCFG_RX_THRESHOLD_SHIFT);
+ writel(val, sspi->regs + SYNQUACER_HSSPI_REG_FIFOCFG);
+ }
+
+ writel(~0, sspi->regs + SYNQUACER_HSSPI_REG_TXC);
+ writel(~0, sspi->regs + SYNQUACER_HSSPI_REG_RXC);
+
+ /* Trigger */
+ val = readl(sspi->regs + SYNQUACER_HSSPI_REG_DMSTART);
+ val |= SYNQUACER_HSSPI_DMSTART_START;
+ writel(val, sspi->regs + SYNQUACER_HSSPI_REG_DMSTART);
+
+ if (xfer->tx_buf) {
+ val = SYNQUACER_HSSPI_TXE_FIFO_EMPTY;
+ writel(val, sspi->regs + SYNQUACER_HSSPI_REG_TXE);
+ status = wait_for_completion_timeout(&sspi->transfer_done,
+ msecs_to_jiffies(SYNQUACER_HSSPI_TRANSFER_TMOUT_MSEC));
+ writel(0, sspi->regs + SYNQUACER_HSSPI_REG_TXE);
+ }
+
+ if (xfer->rx_buf) {
+ u32 buf[SYNQUACER_HSSPI_FIFO_DEPTH];
+
+ val = SYNQUACER_HSSPI_RXE_FIFO_MORE_THAN_THRESHOLD |
+ SYNQUACER_HSSPI_RXE_SLAVE_RELEASED;
+ writel(val, sspi->regs + SYNQUACER_HSSPI_REG_RXE);
+ status = wait_for_completion_timeout(&sspi->transfer_done,
+ msecs_to_jiffies(SYNQUACER_HSSPI_TRANSFER_TMOUT_MSEC));
+ writel(0, sspi->regs + SYNQUACER_HSSPI_REG_RXE);
+
+ /* stop RX and clean RXFIFO */
+ val = readl(sspi->regs + SYNQUACER_HSSPI_REG_DMSTART);
+ val |= SYNQUACER_HSSPI_DMSTOP_STOP;
+ writel(val, sspi->regs + SYNQUACER_HSSPI_REG_DMSTART);
+ sspi->rx_buf = buf;
+ sspi->rx_words = SYNQUACER_HSSPI_FIFO_DEPTH;
+ read_fifo(sspi);
+ }
+
+ if (status < 0) {
+ dev_err(sspi->dev, "failed to transfer. status: 0x%x\n",
+ status);
+ return status;
+ }
+
+ return 0;
+}
+
+static void synquacer_spi_set_cs(struct spi_device *spi, bool enable)
+{
+ struct synquacer_spi *sspi = spi_master_get_devdata(spi->master);
+ u32 val;
+
+ val = readl(sspi->regs + SYNQUACER_HSSPI_REG_DMSTART);
+ val &= ~(SYNQUACER_HSSPI_DMPSEL_CS_MASK <<
+ SYNQUACER_HSSPI_DMPSEL_CS_SHIFT);
+ val |= spi->chip_select << SYNQUACER_HSSPI_DMPSEL_CS_SHIFT;
+ writel(val, sspi->regs + SYNQUACER_HSSPI_REG_DMSTART);
+}
+
+static int synquacer_spi_wait_status_update(struct synquacer_spi *sspi,
+ bool enable)
+{
+ u32 val;
+ unsigned long timeout = jiffies +
+ msecs_to_jiffies(SYNQUACER_HSSPI_ENABLE_TMOUT_MSEC);
+
+ /* wait MES(Module Enable Status) is updated */
+ do {
+ val = readl(sspi->regs + SYNQUACER_HSSPI_REG_MCTRL) &
+ SYNQUACER_HSSPI_MCTRL_MES;
+ if (enable && val)
+ return 0;
+ if (!enable && !val)
+ return 0;
+ } while (time_before(jiffies, timeout));
+
+ dev_err(sspi->dev, "timeout occurs in updating Module Enable Status\n");
+ return -EBUSY;
+}
+
+static int synquacer_spi_enable(struct spi_master *master)
+{
+ u32 val;
+ int status;
+ struct synquacer_spi *sspi = spi_master_get_devdata(master);
+
+ /* Disable module */
+ writel(0, sspi->regs + SYNQUACER_HSSPI_REG_MCTRL);
+ status = synquacer_spi_wait_status_update(sspi, false);
+ if (status < 0)
+ return status;
+
+ writel(0, sspi->regs + SYNQUACER_HSSPI_REG_TXE);
+ writel(0, sspi->regs + SYNQUACER_HSSPI_REG_RXE);
+ writel(~0, sspi->regs + SYNQUACER_HSSPI_REG_TXC);
+ writel(~0, sspi->regs + SYNQUACER_HSSPI_REG_RXC);
+ writel(~0, sspi->regs + SYNQUACER_HSSPI_REG_FAULTC);
+
+ val = readl(sspi->regs + SYNQUACER_HSSPI_REG_DMCFG);
+ val &= ~SYNQUACER_HSSPI_DMCFG_SSDC;
+ val &= ~SYNQUACER_HSSPI_DMCFG_MSTARTEN;
+ writel(val, sspi->regs + SYNQUACER_HSSPI_REG_DMCFG);
+
+ val = readl(sspi->regs + SYNQUACER_HSSPI_REG_MCTRL);
+ if (sspi->clk_src_type == SYNQUACER_HSSPI_CLOCK_SRC_IPCLK)
+ val |= SYNQUACER_HSSPI_MCTRL_CDSS;
+ else
+ val &= ~SYNQUACER_HSSPI_MCTRL_CDSS;
+
+ val &= ~SYNQUACER_HSSPI_MCTRL_COMMAND_SEQUENCE_EN;
+ val |= SYNQUACER_HSSPI_MCTRL_MEN;
+ val |= SYNQUACER_HSSPI_MCTRL_SYNCON;
+
+ /* Enable module */
+ writel(val, sspi->regs + SYNQUACER_HSSPI_REG_MCTRL);
+ status = synquacer_spi_wait_status_update(sspi, true);
+ if (status < 0)
+ return status;
+
+ return 0;
+}
+
+static irqreturn_t sq_spi_rx_handler(int irq, void *priv)
+{
+ uint32_t val;
+ struct synquacer_spi *sspi = priv;
+
+ val = readl(sspi->regs + SYNQUACER_HSSPI_REG_RXF);
+ if ((val & SYNQUACER_HSSPI_RXF_SLAVE_RELEASED) ||
+ (val & SYNQUACER_HSSPI_RXF_FIFO_MORE_THAN_THRESHOLD)) {
+ read_fifo(sspi);
+
+ if (sspi->rx_words == 0) {
+ writel(0, sspi->regs + SYNQUACER_HSSPI_REG_RXE);
+ complete(&sspi->transfer_done);
+ }
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static irqreturn_t sq_spi_tx_handler(int irq, void *priv)
+{
+ uint32_t val;
+ struct synquacer_spi *sspi = priv;
+
+ val = readl(sspi->regs + SYNQUACER_HSSPI_REG_TXF);
+ if (val & SYNQUACER_HSSPI_TXF_FIFO_EMPTY) {
+ if (sspi->tx_words == 0) {
+ writel(0, sspi->regs + SYNQUACER_HSSPI_REG_TXE);
+ complete(&sspi->transfer_done);
+ } else {
+ write_fifo(sspi);
+ }
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static int synquacer_spi_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct spi_master *master;
+ struct synquacer_spi *sspi;
+ int ret;
+ int rx_irq, tx_irq;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*sspi));
+ if (!master)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, master);
+
+ sspi = spi_master_get_devdata(master);
+ sspi->dev = &pdev->dev;
+
+ init_completion(&sspi->transfer_done);
+
+ sspi->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(sspi->regs)) {
+ ret = PTR_ERR(sspi->regs);
+ goto put_spi;
+ }
+
+ sspi->clk_src_type = SYNQUACER_HSSPI_CLOCK_SRC_IHCLK; /* Default */
+ device_property_read_u32(&pdev->dev, "socionext,ihclk-rate",
+ &master->max_speed_hz); /* for ACPI */
+
+ if (dev_of_node(&pdev->dev)) {
+ if (device_property_match_string(&pdev->dev,
+ "clock-names", "iHCLK") >= 0) {
+ sspi->clk_src_type = SYNQUACER_HSSPI_CLOCK_SRC_IHCLK;
+ sspi->clk = devm_clk_get(sspi->dev, "iHCLK");
+ } else if (device_property_match_string(&pdev->dev,
+ "clock-names", "iPCLK") >= 0) {
+ sspi->clk_src_type = SYNQUACER_HSSPI_CLOCK_SRC_IPCLK;
+ sspi->clk = devm_clk_get(sspi->dev, "iPCLK");
+ } else {
+ dev_err(&pdev->dev, "specified wrong clock source\n");
+ ret = -EINVAL;
+ goto put_spi;
+ }
+
+ if (IS_ERR(sspi->clk)) {
+ if (!(PTR_ERR(sspi->clk) == -EPROBE_DEFER))
+ dev_err(&pdev->dev, "clock not found\n");
+ ret = PTR_ERR(sspi->clk);
+ goto put_spi;
+ }
+
+ ret = clk_prepare_enable(sspi->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock (%d)\n",
+ ret);
+ goto put_spi;
+ }
+
+ master->max_speed_hz = clk_get_rate(sspi->clk);
+ }
+
+ if (!master->max_speed_hz) {
+ dev_err(&pdev->dev, "missing clock source\n");
+ return -EINVAL;
+ }
+ master->min_speed_hz = master->max_speed_hz / 254;
+
+ sspi->aces = device_property_read_bool(&pdev->dev,
+ "socionext,set-aces");
+ sspi->rtm = device_property_read_bool(&pdev->dev, "socionext,use-rtm");
+
+ master->num_chipselect = SYNQUACER_HSSPI_NUM_CHIP_SELECT;
+
+ rx_irq = platform_get_irq(pdev, 0);
+ if (rx_irq <= 0) {
+ dev_err(&pdev->dev, "get rx_irq failed (%d)\n", rx_irq);
+ ret = rx_irq;
+ goto put_spi;
+ }
+ snprintf(sspi->rx_irq_name, SYNQUACER_HSSPI_IRQ_NAME_MAX, "%s-rx",
+ dev_name(&pdev->dev));
+ ret = devm_request_irq(&pdev->dev, rx_irq, sq_spi_rx_handler,
+ 0, sspi->rx_irq_name, sspi);
+ if (ret) {
+ dev_err(&pdev->dev, "request rx_irq failed (%d)\n", ret);
+ goto put_spi;
+ }
+
+ tx_irq = platform_get_irq(pdev, 1);
+ if (tx_irq <= 0) {
+ dev_err(&pdev->dev, "get tx_irq failed (%d)\n", tx_irq);
+ ret = tx_irq;
+ goto put_spi;
+ }
+ snprintf(sspi->tx_irq_name, SYNQUACER_HSSPI_IRQ_NAME_MAX, "%s-tx",
+ dev_name(&pdev->dev));
+ ret = devm_request_irq(&pdev->dev, tx_irq, sq_spi_tx_handler,
+ 0, sspi->tx_irq_name, sspi);
+ if (ret) {
+ dev_err(&pdev->dev, "request tx_irq failed (%d)\n", ret);
+ goto put_spi;
+ }
+
+ master->dev.of_node = np;
+ master->dev.fwnode = pdev->dev.fwnode;
+ master->auto_runtime_pm = true;
+ master->bus_num = pdev->id;
+
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_DUAL | SPI_RX_DUAL |
+ SPI_TX_QUAD | SPI_RX_QUAD;
+ master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(24) |
+ SPI_BPW_MASK(16) | SPI_BPW_MASK(8);
+
+ master->set_cs = synquacer_spi_set_cs;
+ master->transfer_one = synquacer_spi_transfer_one;
+
+ ret = synquacer_spi_enable(master);
+ if (ret)
+ goto fail_enable;
+
+ pm_runtime_set_active(sspi->dev);
+ pm_runtime_enable(sspi->dev);
+
+ ret = devm_spi_register_master(sspi->dev, master);
+ if (ret)
+ goto disable_pm;
+
+ return 0;
+
+disable_pm:
+ pm_runtime_disable(sspi->dev);
+fail_enable:
+ clk_disable_unprepare(sspi->clk);
+put_spi:
+ spi_master_put(master);
+
+ return ret;
+}
+
+static int synquacer_spi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct synquacer_spi *sspi = spi_master_get_devdata(master);
+
+ pm_runtime_disable(sspi->dev);
+
+ clk_disable_unprepare(sspi->clk);
+
+ return 0;
+}
+
+static int __maybe_unused synquacer_spi_suspend(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct synquacer_spi *sspi = spi_master_get_devdata(master);
+ int ret;
+
+ ret = spi_master_suspend(master);
+ if (ret)
+ return ret;
+
+ if (!pm_runtime_suspended(dev))
+ clk_disable_unprepare(sspi->clk);
+
+ return ret;
+}
+
+static int __maybe_unused synquacer_spi_resume(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct synquacer_spi *sspi = spi_master_get_devdata(master);
+ int ret;
+
+ if (!pm_runtime_suspended(dev)) {
+ /* Ensure reconfigure during next xfer */
+ sspi->speed = 0;
+
+ ret = clk_prepare_enable(sspi->clk);
+ if (ret < 0) {
+ dev_err(dev, "failed to enable clk (%d)\n",
+ ret);
+ return ret;
+ }
+
+ ret = synquacer_spi_enable(master);
+ if (ret) {
+ dev_err(dev, "failed to enable spi (%d)\n", ret);
+ return ret;
+ }
+ }
+
+ ret = spi_master_resume(master);
+ if (ret < 0)
+ clk_disable_unprepare(sspi->clk);
+
+ return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(synquacer_spi_pm_ops, synquacer_spi_suspend,
+ synquacer_spi_resume);
+
+static const struct of_device_id synquacer_spi_of_match[] = {
+ {.compatible = "socionext,synquacer-spi"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, synquacer_spi_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id synquacer_hsspi_acpi_ids[] = {
+ { "SCX0004" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(acpi, synquacer_hsspi_acpi_ids);
+#endif
+
+static struct platform_driver synquacer_spi_driver = {
+ .driver = {
+ .name = "synquacer-spi",
+ .pm = &synquacer_spi_pm_ops,
+ .of_match_table = synquacer_spi_of_match,
+ .acpi_match_table = ACPI_PTR(synquacer_hsspi_acpi_ids),
+ },
+ .probe = synquacer_spi_probe,
+ .remove = synquacer_spi_remove,
+};
+module_platform_driver(synquacer_spi_driver);
+
+MODULE_DESCRIPTION("Socionext Synquacer HS-SPI controller driver");
+MODULE_AUTHOR("Masahisa Kojima <masahisa.kojima@linaro.org>");
+MODULE_AUTHOR("Jassi Brar <jaswinder.singh@linaro.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index d22f4d10413fece73cd4bf5f0427e6ac34eac4e8..39374c2edcf3b810bdf3bed7b35935dde8349f9f 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -84,8 +84,10 @@
(reg = (((val) & 0x1) << ((cs) * 8 + 5)) | \
((reg) & ~(1 << ((cs) * 8 + 5))))
#define SPI_SET_CYCLES_BETWEEN_PACKETS(reg, cs, val) \
- (reg = (((val) & 0xF) << ((cs) * 8)) | \
- ((reg) & ~(0xF << ((cs) * 8))))
+ (reg = (((val) & 0x1F) << ((cs) * 8)) | \
+ ((reg) & ~(0x1F << ((cs) * 8))))
+#define MAX_SETUP_HOLD_CYCLES 16
+#define MAX_INACTIVE_CYCLES 32
#define SPI_TRANS_STATUS 0x010
#define SPI_BLK_CNT(val) (((val) >> 0) & 0xFFFF)
@@ -156,6 +158,11 @@ struct tegra_spi_soc_data {
bool has_intr_mask_reg;
};
+struct tegra_spi_client_data {
+ int tx_clk_tap_delay;
+ int rx_clk_tap_delay;
+};
+
struct tegra_spi_data {
struct device *dev;
struct spi_master *master;
@@ -182,6 +189,7 @@ struct tegra_spi_data {
unsigned dma_buf_size;
unsigned max_buf_size;
bool is_curr_dma_xfer;
+ bool use_hw_based_cs;
struct completion rx_dma_complete;
struct completion tx_dma_complete;
@@ -194,6 +202,10 @@ struct tegra_spi_data {
u32 command1_reg;
u32 dma_control_reg;
u32 def_command1_reg;
+ u32 def_command2_reg;
+ u32 spi_cs_timing1;
+ u32 spi_cs_timing2;
+ u8 last_used_cs;
struct completion xfer_completion;
struct spi_transfer *curr_xfer;
@@ -711,14 +723,55 @@ static void tegra_spi_deinit_dma_param(struct tegra_spi_data *tspi,
dma_release_channel(dma_chan);
}
+static void tegra_spi_set_hw_cs_timing(struct spi_device *spi, u8 setup_dly,
+ u8 hold_dly, u8 inactive_dly)
+{
+ struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master);
+ u32 setup_hold;
+ u32 spi_cs_timing;
+ u32 inactive_cycles;
+ u8 cs_state;
+
+ setup_dly = min_t(u8, setup_dly, MAX_SETUP_HOLD_CYCLES);
+ hold_dly = min_t(u8, hold_dly, MAX_SETUP_HOLD_CYCLES);
+ if (setup_dly && hold_dly) {
+ setup_hold = SPI_SETUP_HOLD(setup_dly - 1, hold_dly - 1);
+ spi_cs_timing = SPI_CS_SETUP_HOLD(tspi->spi_cs_timing1,
+ spi->chip_select,
+ setup_hold);
+ if (tspi->spi_cs_timing1 != spi_cs_timing) {
+ tspi->spi_cs_timing1 = spi_cs_timing;
+ tegra_spi_writel(tspi, spi_cs_timing, SPI_CS_TIMING1);
+ }
+ }
+
+ inactive_cycles = min_t(u8, inactive_dly, MAX_INACTIVE_CYCLES);
+ if (inactive_cycles)
+ inactive_cycles--;
+ cs_state = inactive_cycles ? 0 : 1;
+ spi_cs_timing = tspi->spi_cs_timing2;
+ SPI_SET_CS_ACTIVE_BETWEEN_PACKETS(spi_cs_timing, spi->chip_select,
+ cs_state);
+ SPI_SET_CYCLES_BETWEEN_PACKETS(spi_cs_timing, spi->chip_select,
+ inactive_cycles);
+ if (tspi->spi_cs_timing2 != spi_cs_timing) {
+ tspi->spi_cs_timing2 = spi_cs_timing;
+ tegra_spi_writel(tspi, spi_cs_timing, SPI_CS_TIMING2);
+ }
+}
+
static u32 tegra_spi_setup_transfer_one(struct spi_device *spi,
- struct spi_transfer *t, bool is_first_of_msg)
+ struct spi_transfer *t,
+ bool is_first_of_msg,
+ bool is_single_xfer)
{
struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master);
+ struct tegra_spi_client_data *cdata = spi->controller_data;
u32 speed = t->speed_hz;
u8 bits_per_word = t->bits_per_word;
- u32 command1;
+ u32 command1, command2;
int req_mode;
+ u32 tx_tap = 0, rx_tap = 0;
if (speed != tspi->cur_speed) {
clk_set_rate(tspi->clk, speed);
@@ -765,13 +818,34 @@ static u32 tegra_spi_setup_transfer_one(struct spi_device *spi,
} else
tegra_spi_writel(tspi, command1, SPI_COMMAND1);
- command1 |= SPI_CS_SW_HW;
- if (spi->mode & SPI_CS_HIGH)
- command1 |= SPI_CS_SW_VAL;
- else
- command1 &= ~SPI_CS_SW_VAL;
+ /* GPIO based chip select control */
+ if (spi->cs_gpiod)
+ gpiod_set_value(spi->cs_gpiod, 1);
+
+ if (is_single_xfer && !(t->cs_change)) {
+ tspi->use_hw_based_cs = true;
+ command1 &= ~(SPI_CS_SW_HW | SPI_CS_SW_VAL);
+ } else {
+ tspi->use_hw_based_cs = false;
+ command1 |= SPI_CS_SW_HW;
+ if (spi->mode & SPI_CS_HIGH)
+ command1 |= SPI_CS_SW_VAL;
+ else
+ command1 &= ~SPI_CS_SW_VAL;
+ }
+
+ if (tspi->last_used_cs != spi->chip_select) {
+ if (cdata && cdata->tx_clk_tap_delay)
+ tx_tap = cdata->tx_clk_tap_delay;
+ if (cdata && cdata->rx_clk_tap_delay)
+ rx_tap = cdata->rx_clk_tap_delay;
+ command2 = SPI_TX_TAP_DELAY(tx_tap) |
+ SPI_RX_TAP_DELAY(rx_tap);
+ if (command2 != tspi->def_command2_reg)
+ tegra_spi_writel(tspi, command2, SPI_COMMAND2);
+ tspi->last_used_cs = spi->chip_select;
+ }
- tegra_spi_writel(tspi, 0, SPI_COMMAND2);
} else {
command1 = tspi->command1_reg;
command1 &= ~SPI_BIT_LENGTH(~0);
@@ -827,9 +901,42 @@ static int tegra_spi_start_transfer_one(struct spi_device *spi,
return ret;
}
+static struct tegra_spi_client_data
+ *tegra_spi_parse_cdata_dt(struct spi_device *spi)
+{
+ struct tegra_spi_client_data *cdata;
+ struct device_node *slave_np;
+
+ slave_np = spi->dev.of_node;
+ if (!slave_np) {
+ dev_dbg(&spi->dev, "device node not found\n");
+ return NULL;
+ }
+
+ cdata = kzalloc(sizeof(*cdata), GFP_KERNEL);
+ if (!cdata)
+ return NULL;
+
+ of_property_read_u32(slave_np, "nvidia,tx-clk-tap-delay",
+ &cdata->tx_clk_tap_delay);
+ of_property_read_u32(slave_np, "nvidia,rx-clk-tap-delay",
+ &cdata->rx_clk_tap_delay);
+ return cdata;
+}
+
+static void tegra_spi_cleanup(struct spi_device *spi)
+{
+ struct tegra_spi_client_data *cdata = spi->controller_data;
+
+ spi->controller_data = NULL;
+ if (spi->dev.of_node)
+ kfree(cdata);
+}
+
static int tegra_spi_setup(struct spi_device *spi)
{
struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master);
+ struct tegra_spi_client_data *cdata = spi->controller_data;
u32 val;
unsigned long flags;
int ret;
@@ -840,9 +947,16 @@ static int tegra_spi_setup(struct spi_device *spi)
spi->mode & SPI_CPHA ? "" : "~",
spi->max_speed_hz);
+ if (!cdata) {
+ cdata = tegra_spi_parse_cdata_dt(spi);
+ spi->controller_data = cdata;
+ }
+
ret = pm_runtime_get_sync(tspi->dev);
if (ret < 0) {
dev_err(tspi->dev, "pm runtime failed, e = %d\n", ret);
+ if (cdata)
+ tegra_spi_cleanup(spi);
return ret;
}
@@ -853,6 +967,10 @@ static int tegra_spi_setup(struct spi_device *spi)
}
spin_lock_irqsave(&tspi->lock, flags);
+ /* GPIO based chip select control */
+ if (spi->cs_gpiod)
+ gpiod_set_value(spi->cs_gpiod, 0);
+
val = tspi->def_command1_reg;
if (spi->mode & SPI_CS_HIGH)
val &= ~SPI_CS_POL_INACTIVE(spi->chip_select);
@@ -882,11 +1000,18 @@ static void tegra_spi_transfer_end(struct spi_device *spi)
struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master);
int cs_val = (spi->mode & SPI_CS_HIGH) ? 0 : 1;
- if (cs_val)
- tspi->command1_reg |= SPI_CS_SW_VAL;
- else
- tspi->command1_reg &= ~SPI_CS_SW_VAL;
- tegra_spi_writel(tspi, tspi->command1_reg, SPI_COMMAND1);
+ /* GPIO based chip select control */
+ if (spi->cs_gpiod)
+ gpiod_set_value(spi->cs_gpiod, 0);
+
+ if (!tspi->use_hw_based_cs) {
+ if (cs_val)
+ tspi->command1_reg |= SPI_CS_SW_VAL;
+ else
+ tspi->command1_reg &= ~SPI_CS_SW_VAL;
+ tegra_spi_writel(tspi, tspi->command1_reg, SPI_COMMAND1);
+ }
+
tegra_spi_writel(tspi, tspi->def_command1_reg, SPI_COMMAND1);
}
@@ -913,16 +1038,19 @@ static int tegra_spi_transfer_one_message(struct spi_master *master,
struct spi_device *spi = msg->spi;
int ret;
bool skip = false;
+ int single_xfer;
msg->status = 0;
msg->actual_length = 0;
+ single_xfer = list_is_singular(&msg->transfers);
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
u32 cmd1;
reinit_completion(&tspi->xfer_completion);
- cmd1 = tegra_spi_setup_transfer_one(spi, xfer, is_first_msg);
+ cmd1 = tegra_spi_setup_transfer_one(spi, xfer, is_first_msg,
+ single_xfer);
if (!xfer->len) {
ret = 0;
@@ -955,6 +1083,7 @@ static int tegra_spi_transfer_one_message(struct spi_master *master,
reset_control_assert(tspi->rst);
udelay(2);
reset_control_deassert(tspi->rst);
+ tspi->last_used_cs = master->num_chipselect + 1;
goto complete_xfer;
}
@@ -1188,11 +1317,14 @@ static int tegra_spi_probe(struct platform_device *pdev)
master->max_speed_hz = 25000000; /* 25MHz */
/* the spi->mode bits understood by this driver: */
+ master->use_gpio_descriptors = true;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST |
SPI_TX_DUAL | SPI_RX_DUAL | SPI_3WIRE;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
master->setup = tegra_spi_setup;
+ master->cleanup = tegra_spi_cleanup;
master->transfer_one_message = tegra_spi_transfer_one_message;
+ master->set_cs_timing = tegra_spi_set_hw_cs_timing;
master->num_chipselect = MAX_CHIP_SELECT;
master->auto_runtime_pm = true;
bus_num = of_alias_get_id(pdev->dev.of_node, "spi");
@@ -1268,6 +1400,10 @@ static int tegra_spi_probe(struct platform_device *pdev)
reset_control_deassert(tspi->rst);
tspi->def_command1_reg = SPI_M_S;
tegra_spi_writel(tspi, tspi->def_command1_reg, SPI_COMMAND1);
+ tspi->spi_cs_timing1 = tegra_spi_readl(tspi, SPI_CS_TIMING1);
+ tspi->spi_cs_timing2 = tegra_spi_readl(tspi, SPI_CS_TIMING2);
+ tspi->def_command2_reg = tegra_spi_readl(tspi, SPI_COMMAND2);
+ tspi->last_used_cs = master->num_chipselect + 1;
pm_runtime_put(&pdev->dev);
ret = request_threaded_irq(tspi->irq, tegra_spi_isr,
tegra_spi_isr_thread, IRQF_ONESHOT,
@@ -1340,6 +1476,8 @@ static int tegra_spi_resume(struct device *dev)
return ret;
}
tegra_spi_writel(tspi, tspi->command1_reg, SPI_COMMAND1);
+ tegra_spi_writel(tspi, tspi->def_command2_reg, SPI_COMMAND2);
+ tspi->last_used_cs = master->num_chipselect + 1;
pm_runtime_put(dev);
return spi_master_resume(master);
diff --git a/drivers/spi/spi-uniphier.c b/drivers/spi/spi-uniphier.c
index 5a6137fe172df6eb5633ee38b7b3be2c01a84305..b32c77df5d49cf8acd5c253d9f6965909383e834 100644
--- a/drivers/spi/spi-uniphier.c
+++ b/drivers/spi/spi-uniphier.c
@@ -328,7 +328,12 @@ static int uniphier_spi_transfer_one(struct spi_master *master,
struct spi_transfer *t)
{
struct uniphier_spi_priv *priv = spi_master_get_devdata(master);
- int status;
+ struct device *dev = master->dev.parent;
+ unsigned long time_left;
+
+ /* Terminate and return success for 0 byte length transfer */
+ if (!t->len)
+ return 0;
uniphier_spi_setup_transfer(spi, t);
@@ -338,13 +343,15 @@ static int uniphier_spi_transfer_one(struct spi_master *master,
uniphier_spi_irq_enable(spi, SSI_IE_RCIE | SSI_IE_RORIE);
- status = wait_for_completion_timeout(&priv->xfer_done,
- msecs_to_jiffies(SSI_TIMEOUT_MS));
+ time_left = wait_for_completion_timeout(&priv->xfer_done,
+ msecs_to_jiffies(SSI_TIMEOUT_MS));
uniphier_spi_irq_disable(spi, SSI_IE_RCIE | SSI_IE_RORIE);
- if (status < 0)
- return status;
+ if (!time_left) {
+ dev_err(dev, "transfer timeout.\n");
+ return -ETIMEDOUT;
+ }
return priv->error;
}
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 5e4654032bfa527787b66d6269b916e22b9a599b..91673351bcf396bc69a8026a5ed6496bd2422d7f 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1090,6 +1090,60 @@ static int spi_transfer_wait(struct spi_controller *ctlr,
return 0;
}
+static void _spi_transfer_delay_ns(u32 ns)
+{
+ if (!ns)
+ return;
+ if (ns <= 1000) {
+ ndelay(ns);
+ } else {
+ u32 us = DIV_ROUND_UP(ns, 1000);
+
+ if (us <= 10)
+ udelay(us);
+ else
+ usleep_range(us, us + DIV_ROUND_UP(us, 10));
+ }
+}
+
+static void _spi_transfer_cs_change_delay(struct spi_message *msg,
+ struct spi_transfer *xfer)
+{
+ u32 delay = xfer->cs_change_delay;
+ u32 unit = xfer->cs_change_delay_unit;
+ u32 hz;
+
+ /* return early on "fast" mode - for everything but USECS */
+ if (!delay && unit != SPI_DELAY_UNIT_USECS)
+ return;
+
+ switch (unit) {
+ case SPI_DELAY_UNIT_USECS:
+ /* for compatibility use default of 10us */
+ if (!delay)
+ delay = 10000;
+ else
+ delay *= 1000;
+ break;
+ case SPI_DELAY_UNIT_NSECS: /* nothing to do here */
+ break;
+ case SPI_DELAY_UNIT_SCK:
+ /* if there is no effective speed know, then approximate
+ * by underestimating with half the requested hz
+ */
+ hz = xfer->effective_speed_hz ?: xfer->speed_hz / 2;
+ delay *= DIV_ROUND_UP(1000000000, hz);
+ break;
+ default:
+ dev_err_once(&msg->spi->dev,
+ "Use of unsupported delay unit %i, using default of 10us\n",
+ xfer->cs_change_delay_unit);
+ delay = 10000;
+ }
+ /* now sleep for the requested amount of time */
+ _spi_transfer_delay_ns(delay);
+}
+
/*
* spi_transfer_one_message - Default implementation of transfer_one_message()
*
@@ -1148,14 +1202,8 @@ static int spi_transfer_one_message(struct spi_controller *ctlr,
if (msg->status != -EINPROGRESS)
goto out;
- if (xfer->delay_usecs) {
- u16 us = xfer->delay_usecs;
-
- if (us <= 10)
- udelay(us);
- else
- usleep_range(us, us + DIV_ROUND_UP(us, 10));
- }
+ if (xfer->delay_usecs)
+ _spi_transfer_delay_ns(xfer->delay_usecs * 1000);
if (xfer->cs_change) {
if (list_is_last(&xfer->transfer_list,
@@ -1163,7 +1211,7 @@ static int spi_transfer_one_message(struct spi_controller *ctlr,
keep_cs = true;
} else {
spi_set_cs(msg->spi, false);
- udelay(10);
+ _spi_transfer_cs_change_delay(msg, xfer);
spi_set_cs(msg->spi, true);
}
}
@@ -1369,10 +1417,32 @@ static void spi_pump_messages(struct kthread_work *work)
__spi_pump_messages(ctlr, true);
}
-static int spi_init_queue(struct spi_controller *ctlr)
+/**
+ * spi_set_thread_rt - set the controller to pump at realtime priority
+ * @ctlr: controller to boost priority of
+ *
+ * This can be called because the controller requested realtime priority
+ * (by setting the ->rt value before calling spi_register_controller()) or
+ * because a device on the bus said that its transfers needed realtime
+ * priority.
+ *
+ * NOTE: at the moment if any device on a bus says it needs realtime then
+ * the thread will be at realtime priority for all transfers on that
+ * controller. If this eventually becomes a problem we may see if we can
+ * find a way to boost the priority only temporarily during relevant
+ * transfers.
+ */
+static void spi_set_thread_rt(struct spi_controller *ctlr)
{
struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 };
+ dev_info(&ctlr->dev,
+ "will run message pump with realtime priority\n");
+ sched_setscheduler(ctlr->kworker_task, SCHED_FIFO, ¶m);
+}
+
+static int spi_init_queue(struct spi_controller *ctlr)
+{
ctlr->running = false;
ctlr->busy = false;
@@ -1392,11 +1462,8 @@ static int spi_init_queue(struct spi_controller *ctlr)
* request and the scheduling of the message pump thread. Without this
* setting the message pump thread will remain at default priority.
*/
- if (ctlr->rt) {
- dev_info(&ctlr->dev,
- "will run message pump with realtime priority\n");
- sched_setscheduler(ctlr->kworker_task, SCHED_FIFO, ¶m);
- }
+ if (ctlr->rt)
+ spi_set_thread_rt(ctlr);
return 0;
}
@@ -1804,9 +1871,18 @@ static void of_register_spi_devices(struct spi_controller *ctlr) { }
#endif
#ifdef CONFIG_ACPI
-static void acpi_spi_parse_apple_properties(struct spi_device *spi)
+struct acpi_spi_lookup {
+ struct spi_controller *ctlr;
+ u32 max_speed_hz;
+ u32 mode;
+ int irq;
+ u8 bits_per_word;
+ u8 chip_select;
+};
+
+static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
+ struct acpi_spi_lookup *lookup)
{
- struct acpi_device *dev = ACPI_COMPANION(&spi->dev);
const union acpi_object *obj;
if (!x86_apple_machine)
@@ -1814,35 +1890,46 @@ static void acpi_spi_parse_apple_properties(struct spi_device *spi)
if (!acpi_dev_get_property(dev, "spiSclkPeriod", ACPI_TYPE_BUFFER, &obj)
&& obj->buffer.length >= 4)
- spi->max_speed_hz = NSEC_PER_SEC / *(u32 *)obj->buffer.pointer;
+ lookup->max_speed_hz = NSEC_PER_SEC / *(u32 *)obj->buffer.pointer;
if (!acpi_dev_get_property(dev, "spiWordSize", ACPI_TYPE_BUFFER, &obj)
&& obj->buffer.length == 8)
- spi->bits_per_word = *(u64 *)obj->buffer.pointer;
+ lookup->bits_per_word = *(u64 *)obj->buffer.pointer;
if (!acpi_dev_get_property(dev, "spiBitOrder", ACPI_TYPE_BUFFER, &obj)
&& obj->buffer.length == 8 && !*(u64 *)obj->buffer.pointer)
- spi->mode |= SPI_LSB_FIRST;
+ lookup->mode |= SPI_LSB_FIRST;
if (!acpi_dev_get_property(dev, "spiSPO", ACPI_TYPE_BUFFER, &obj)
&& obj->buffer.length == 8 && *(u64 *)obj->buffer.pointer)
- spi->mode |= SPI_CPOL;
+ lookup->mode |= SPI_CPOL;
if (!acpi_dev_get_property(dev, "spiSPH", ACPI_TYPE_BUFFER, &obj)
&& obj->buffer.length == 8 && *(u64 *)obj->buffer.pointer)
- spi->mode |= SPI_CPHA;
+ lookup->mode |= SPI_CPHA;
}
static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
{
- struct spi_device *spi = data;
- struct spi_controller *ctlr = spi->controller;
+ struct acpi_spi_lookup *lookup = data;
+ struct spi_controller *ctlr = lookup->ctlr;
if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
struct acpi_resource_spi_serialbus *sb;
+ acpi_handle parent_handle;
+ acpi_status status;
sb = &ares->data.spi_serial_bus;
if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
+
+ status = acpi_get_handle(NULL,
+ sb->resource_source.string_ptr,
+ &parent_handle);
+
+ if (ACPI_FAILURE(status) ||
+ ACPI_HANDLE(ctlr->dev.parent) != parent_handle)
+ return -ENODEV;
+
/*
* ACPI DeviceSelection numbering is handled by the
* host controller driver in Windows and can vary
@@ -1855,25 +1942,25 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
sb->device_selection);
if (cs < 0)
return cs;
- spi->chip_select = cs;
+ lookup->chip_select = cs;
} else {
- spi->chip_select = sb->device_selection;
+ lookup->chip_select = sb->device_selection;
}
- spi->max_speed_hz = sb->connection_speed;
+ lookup->max_speed_hz = sb->connection_speed;
if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
- spi->mode |= SPI_CPHA;
+ lookup->mode |= SPI_CPHA;
if (sb->clock_polarity == ACPI_SPI_START_HIGH)
- spi->mode |= SPI_CPOL;
+ lookup->mode |= SPI_CPOL;
if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH)
- spi->mode |= SPI_CS_HIGH;
+ lookup->mode |= SPI_CS_HIGH;
}
- } else if (spi->irq < 0) {
+ } else if (lookup->irq < 0) {
struct resource r;
if (acpi_dev_resource_interrupt(ares, 0, &r))
- spi->irq = r.start;
+ lookup->irq = r.start;
}
/* Always tell the ACPI core to skip this resource */
@@ -1883,7 +1970,9 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
struct acpi_device *adev)
{
+ acpi_handle parent_handle = NULL;
struct list_head resource_list;
+ struct acpi_spi_lookup lookup = {};
struct spi_device *spi;
int ret;
@@ -1891,28 +1980,42 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
acpi_device_enumerated(adev))
return AE_OK;
- spi = spi_alloc_device(ctlr);
- if (!spi) {
- dev_err(&ctlr->dev, "failed to allocate SPI device for %s\n",
- dev_name(&adev->dev));
- return AE_NO_MEMORY;
- }
-
- ACPI_COMPANION_SET(&spi->dev, adev);
- spi->irq = -1;
+ lookup.ctlr = ctlr;
+ lookup.irq = -1;
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_resources(adev, &resource_list,
- acpi_spi_add_resource, spi);
+ acpi_spi_add_resource, &lookup);
acpi_dev_free_resource_list(&resource_list);
- acpi_spi_parse_apple_properties(spi);
+ if (ret < 0)
+ /* found SPI in _CRS but it points to another controller */
+ return AE_OK;
- if (ret < 0 || !spi->max_speed_hz) {
- spi_dev_put(spi);
+ if (!lookup.max_speed_hz &&
+ !ACPI_FAILURE(acpi_get_parent(adev->handle, &parent_handle)) &&
+ ACPI_HANDLE(ctlr->dev.parent) == parent_handle) {
+ /* Apple does not use _CRS but nested devices for SPI slaves */
+ acpi_spi_parse_apple_properties(adev, &lookup);
+ }
+
+ if (!lookup.max_speed_hz)
return AE_OK;
+
+ spi = spi_alloc_device(ctlr);
+ if (!spi) {
+ dev_err(&ctlr->dev, "failed to allocate SPI device for %s\n",
+ dev_name(&adev->dev));
+ return AE_NO_MEMORY;
}
+ ACPI_COMPANION_SET(&spi->dev, adev);
+ spi->max_speed_hz = lookup.max_speed_hz;
+ spi->mode = lookup.mode;
+ spi->irq = lookup.irq;
+ spi->bits_per_word = lookup.bits_per_word;
+ spi->chip_select = lookup.chip_select;
+
acpi_set_modalias(adev, acpi_device_hid(adev), spi->modalias,
sizeof(spi->modalias));
@@ -1944,6 +2047,8 @@ static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
return acpi_register_spi_device(ctlr, adev);
}
+#define SPI_ACPI_ENUMERATE_MAX_DEPTH 32
+
static void acpi_register_spi_devices(struct spi_controller *ctlr)
{
acpi_status status;
@@ -1953,7 +2058,8 @@ static void acpi_register_spi_devices(struct spi_controller *ctlr)
if (!handle)
return;
- status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+ SPI_ACPI_ENUMERATE_MAX_DEPTH,
acpi_spi_add_device, NULL, ctlr, NULL);
if (ACPI_FAILURE(status))
dev_warn(&ctlr->dev, "failed to enumerate SPI slaves\n");
@@ -2286,11 +2392,6 @@ int spi_register_controller(struct spi_controller *ctlr)
if (status)
return status;
- /* even if it's just one always-selected device, there must
- * be at least one chipselect
- */
- if (ctlr->num_chipselect == 0)
- return -EINVAL;
if (ctlr->bus_num >= 0) {
/* devices with a fixed bus num must check-in with the num */
mutex_lock(&board_lock);
@@ -2361,6 +2462,13 @@ int spi_register_controller(struct spi_controller *ctlr)
}
}
+ /*
+ * Even if it's just one always-selected device, there must
+ * be at least one chipselect.
+ */
+ if (!ctlr->num_chipselect)
+ return -EINVAL;
+
status = device_add(&ctlr->dev);
if (status < 0) {
/* free bus id */
@@ -2470,7 +2578,6 @@ void spi_unregister_controller(struct spi_controller *ctlr)
{
struct spi_controller *found;
int id = ctlr->bus_num;
- int dummy;
/* First make sure that this controller was ever added */
mutex_lock(&board_lock);
@@ -2484,7 +2591,7 @@ void spi_unregister_controller(struct spi_controller *ctlr)
list_del(&ctlr->list);
mutex_unlock(&board_lock);
- dummy = device_for_each_child(&ctlr->dev, NULL, __unregister);
+ device_for_each_child(&ctlr->dev, NULL, __unregister);
device_unregister(&ctlr->dev);
/* free bus id */
mutex_lock(&board_lock);
@@ -2633,12 +2740,9 @@ EXPORT_SYMBOL_GPL(spi_res_add);
*/
void spi_res_release(struct spi_controller *ctlr, struct spi_message *message)
{
- struct spi_res *res;
-
- while (!list_empty(&message->resources)) {
- res = list_last_entry(&message->resources,
- struct spi_res, entry);
+ struct spi_res *res, *tmp;
+ list_for_each_entry_safe_reverse(res, tmp, &message->resources, entry) {
if (res->release)
res->release(ctlr, message, res->data);
@@ -2702,8 +2806,7 @@ struct spi_replaced_transfers *spi_replace_transfers(
/* allocate the structure using spi_res */
rxfer = spi_res_alloc(msg->spi, __spi_replace_transfers_release,
- insert * sizeof(struct spi_transfer)
- + sizeof(struct spi_replaced_transfers)
+ struct_size(rxfer, inserted_transfers, insert)
+ extradatasize,
gfp);
if (!rxfer)
@@ -2987,6 +3090,11 @@ int spi_setup(struct spi_device *spi)
spi_set_cs(spi, false);
+ if (spi->rt && !spi->controller->rt) {
+ spi->controller->rt = true;
+ spi_set_thread_rt(spi->controller);
+ }
+
dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n",
(int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
(spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
@@ -3083,6 +3191,7 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message)
*/
message->frame_length = 0;
list_for_each_entry(xfer, &message->transfers, transfer_list) {
+ xfer->effective_speed_hz = 0;
message->frame_length += xfer->len;
if (!xfer->bits_per_word)
xfer->bits_per_word = spi->bits_per_word;
@@ -3762,4 +3871,3 @@ static int __init spi_init(void)
* include needing to have boardinfo data structures be much more public.
*/
postcore_initcall(spi_init);
-
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 422bac8cc3e0376f25f7acf6d908e7cbaa0ae0c0..255786f2e84472a1a9f4ceb416dd27402bca2fc9 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -663,6 +663,8 @@ static const struct of_device_id spidev_dt_ids[] = {
{ .compatible = "ge,achc" },
{ .compatible = "semtech,sx1301" },
{ .compatible = "lwn,bk4" },
+ { .compatible = "dh,dhcom-board" },
+ { .compatible = "menlo,m53cpld" },
{},
};
MODULE_DEVICE_TABLE(of, spidev_dt_ids);
diff --git a/include/linux/platform_data/spi-mt65xx.h b/include/linux/platform_data/spi-mt65xx.h
index 617a75336d569aec0e8593cfe8baa0c793289608..f0e6d6483e6279f7bfb2e46c825f65cfc9727d14 100644
--- a/include/linux/platform_data/spi-mt65xx.h
+++ b/include/linux/platform_data/spi-mt65xx.h
@@ -11,8 +11,6 @@
/* Board specific platform_data */
struct mtk_chip_config {
- u32 tx_mlsb;
- u32 rx_mlsb;
u32 cs_pol;
u32 sample_sel;
};
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 053abd22ad3167a0254e6a7403f10ab021f1630d..af4f265d0f67e021a6b38fde7ed10c609b94c1a7 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -109,6 +109,7 @@ void spi_statistics_add_transfer_stats(struct spi_statistics *stats,
* This may be changed by the device's driver, or left at the
* default (0) indicating protocol words are eight bit bytes.
* The spi_transfer.bits_per_word can override this for each transfer.
+ * @rt: Make the pump thread real time priority.
* @irq: Negative, or the number passed to request_irq() to receive
* interrupts from this device.
* @controller_state: Controller's runtime state
@@ -143,6 +144,7 @@ struct spi_device {
u32 max_speed_hz;
u8 chip_select;
u8 bits_per_word;
+ bool rt;
u32 mode;
#define SPI_CPHA 0x01 /* clock phase */
#define SPI_CPOL 0x02 /* clock polarity */
@@ -735,6 +737,9 @@ extern void spi_res_release(struct spi_controller *ctlr,
* @bits_per_word: select a bits_per_word other than the device default
* for this transfer. If 0 the default (from @spi_device) is used.
* @cs_change: affects chipselect after this transfer completes
+ * @cs_change_delay: delay between cs deassert and assert when
+ * @cs_change is set and @spi_transfer is not the last in @spi_message
+ * @cs_change_delay_unit: unit of cs_change_delay
* @delay_usecs: microseconds to delay after this transfer before
* (optionally) changing the chipselect status, then starting
* the next transfer or completing this @spi_message.
@@ -742,6 +747,9 @@ extern void spi_res_release(struct spi_controller *ctlr,
* (set by bits_per_word) transmission.
* @word_delay: clock cycles to inter word delay after each word size
* (set by bits_per_word) transmission.
+ * @effective_speed_hz: the effective SCK-speed that was used to
+ * transfer this transfer. Set to 0 if the spi bus driver does
+ * not support it.
* @transfer_list: transfers are sequenced through @spi_message.transfers
* @tx_sg: Scatterlist for transmit, currently not for client use
* @rx_sg: Scatterlist for receive, currently not for client use
@@ -824,9 +832,16 @@ struct spi_transfer {
u8 bits_per_word;
u8 word_delay_usecs;
u16 delay_usecs;
+ u16 cs_change_delay;
+ u8 cs_change_delay_unit;
+#define SPI_DELAY_UNIT_USECS 0
+#define SPI_DELAY_UNIT_NSECS 1
+#define SPI_DELAY_UNIT_SCK 2
u32 speed_hz;
u16 word_delay;
+ u32 effective_speed_hz;
+
struct list_head transfer_list;
};
@@ -967,6 +982,8 @@ static inline void spi_message_free(struct spi_message *m)
kfree(m);
}
+extern void spi_set_cs_timing(struct spi_device *spi, u8 setup, u8 hold, u8 inactive_dly);
+
extern int spi_setup(struct spi_device *spi);
extern int spi_async(struct spi_device *spi, struct spi_message *message);
extern int spi_async_locked(struct spi_device *spi,
@@ -997,6 +1014,26 @@ spi_max_transfer_size(struct spi_device *spi)
return min(tr_max, msg_max);
}
+/**
+ * spi_is_bpw_supported - Check if bits per word is supported
+ * @spi: SPI device
+ * @bpw: Bits per word
+ *
+ * This function checks to see if the SPI controller supports @bpw.
+ *
+ * Returns:
+ * True if @bpw is supported, false otherwise.
+ */
+static inline bool spi_is_bpw_supported(struct spi_device *spi, u32 bpw)
+{
+ u32 bpw_mask = spi->master->bits_per_word_mask;
+
+ if (bpw == 8 || (bpw <= 32 && bpw_mask & SPI_BPW_MASK(bpw)))
+ return true;
+
+ return false;
+}
+
/*---------------------------------------------------------------------------*/
/* SPI transfer replacement methods which make use of spi_res */