From e5868a318d1ae28f760f77bb91ce5deb751733fd Mon Sep 17 00:00:00 2001
From: Egbert Eich <eich@suse.de>
Date: Thu, 28 Feb 2013 04:17:12 -0500
Subject: [PATCH] DRM/i915: Convert HPD interrupts to make use of HPD pin
assignment in encoders (v2)
This allows to enable HPD interrupts for individual pins to only receive
hotplug events from lines which are connected and working.
v2: Restructured initailization of const arrays following a suggstion
by Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Egbert Eich <eich@suse.de>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
drivers/gpu/drm/i915/i915_irq.c | 155 +++++++++++++++++++-------------
drivers/gpu/drm/i915/i915_reg.h | 32 ++++++-
2 files changed, 125 insertions(+), 62 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 1a24744f7a27e..ef9fce50530d8 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -36,6 +36,59 @@
#include "i915_trace.h"
#include "intel_drv.h"
+static const u32 hpd_ibx[] = {
+ [HPD_CRT] = SDE_CRT_HOTPLUG,
+ [HPD_SDVO_B] = SDE_SDVOB_HOTPLUG,
+ [HPD_PORT_B] = SDE_PORTB_HOTPLUG,
+ [HPD_PORT_C] = SDE_PORTC_HOTPLUG,
+ [HPD_PORT_D] = SDE_PORTD_HOTPLUG
+};
+
+static const u32 hpd_cpt[] = {
+ [HPD_CRT] = SDE_CRT_HOTPLUG_CPT,
+ [HPD_PORT_B] = SDE_PORTB_HOTPLUG_CPT,
+ [HPD_PORT_C] = SDE_PORTC_HOTPLUG_CPT,
+ [HPD_PORT_D] = SDE_PORTD_HOTPLUG_CPT
+};
+
+static const u32 hpd_mask_i915[] = {
+ [HPD_CRT] = CRT_HOTPLUG_INT_EN,
+ [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_EN,
+ [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_EN,
+ [HPD_PORT_B] = PORTB_HOTPLUG_INT_EN,
+ [HPD_PORT_C] = PORTC_HOTPLUG_INT_EN,
+ [HPD_PORT_D] = PORTD_HOTPLUG_INT_EN
+};
+
+static const u32 hpd_status_gen4[] = {
+ [HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
+ [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_G4X,
+ [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_G4X,
+ [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
+ [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
+ [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
+};
+
+static const u32 hpd_status_i965[] = {
+ [HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
+ [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I965,
+ [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I965,
+ [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
+ [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
+ [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
+};
+
+static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */
+ [HPD_CRT] = CRT_HOTPLUG_INT_STATUS,
+ [HPD_SDVO_B] = SDVOB_HOTPLUG_INT_STATUS_I915,
+ [HPD_SDVO_C] = SDVOC_HOTPLUG_INT_STATUS_I915,
+ [HPD_PORT_B] = PORTB_HOTPLUG_INT_STATUS,
+ [HPD_PORT_C] = PORTC_HOTPLUG_INT_STATUS,
+ [HPD_PORT_D] = PORTD_HOTPLUG_INT_STATUS
+};
+
+
+
/* For display hotplug interrupt */
static void
ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
@@ -599,7 +652,7 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg)
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
- if (hotplug_status & dev_priv->hotplug_supported_mask)
+ if (hotplug_status & HOTPLUG_INT_STATUS_I915)
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
@@ -2034,17 +2087,21 @@ static void ibx_enable_hotplug(struct drm_device *dev)
static void ibx_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 mask;
-
- if (HAS_PCH_IBX(dev))
- mask = SDE_HOTPLUG_MASK |
- SDE_GMBUS |
- SDE_AUX_MASK;
- else
- mask = SDE_HOTPLUG_MASK_CPT |
- SDE_GMBUS_CPT |
- SDE_AUX_MASK_CPT;
-
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *intel_encoder;
+ u32 mask = I915_READ(SDEIER);
+
+ if (HAS_PCH_IBX(dev)) {
+ mask &= ~SDE_HOTPLUG_MASK;
+ list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
+ mask |= hpd_ibx[intel_encoder->hpd_pin];
+ mask |= SDE_GMBUS | SDE_AUX_MASK;
+ } else {
+ mask &= ~SDE_HOTPLUG_MASK_CPT;
+ list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
+ mask |= hpd_cpt[intel_encoder->hpd_pin];
+ mask |= SDE_GMBUS_CPT | SDE_AUX_MASK_CPT;
+ }
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
I915_WRITE(SDEIMR, ~mask);
I915_WRITE(SDEIER, mask);
@@ -2466,26 +2523,16 @@ static int i915_irq_postinstall(struct drm_device *dev)
static void i915_hpd_irq_setup(struct drm_device *dev)
{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 hotplug_en;
-
if (I915_HAS_HOTPLUG(dev)) {
- hotplug_en = I915_READ(PORT_HOTPLUG_EN);
-
- if (dev_priv->hotplug_supported_mask & PORTB_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & PORTC_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & PORTD_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTD_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I915)
- hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I915)
- hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
- hotplug_en |= CRT_HOTPLUG_INT_EN;
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
- }
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *encoder;
+ u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
+
+ hotplug_en &= ~HOTPLUG_INT_EN_MASK;
+ list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
+ hotplug_en |= hpd_mask_i915[encoder->hpd_pin];
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
/* Ignore TV since it's buggy */
@@ -2576,7 +2623,7 @@ static irqreturn_t i915_irq_handler(int irq, void *arg)
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
- if (hotplug_status & dev_priv->hotplug_supported_mask)
+ if (hotplug_status & HOTPLUG_INT_STATUS_I915)
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
@@ -2725,38 +2772,22 @@ static int i965_irq_postinstall(struct drm_device *dev)
static void i965_hpd_irq_setup(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *encoder;
u32 hotplug_en;
/* Note HDMI and DP share hotplug bits */
hotplug_en = 0;
- if (dev_priv->hotplug_supported_mask & PORTB_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTB_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & PORTC_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & PORTD_HOTPLUG_INT_STATUS)
- hotplug_en |= PORTD_HOTPLUG_INT_EN;
- if (IS_G4X(dev)) {
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_G4X)
- hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_G4X)
- hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- } else {
- if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS_I965)
- hotplug_en |= SDVOC_HOTPLUG_INT_EN;
- if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS_I965)
- hotplug_en |= SDVOB_HOTPLUG_INT_EN;
- }
- if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
- hotplug_en |= CRT_HOTPLUG_INT_EN;
-
- /* Programming the CRT detection parameters tends
- to generate a spurious hotplug event about three
- seconds later. So just do it once.
- */
- if (IS_G4X(dev))
- hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
- hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
- }
+ list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
+ /* enable bits are the same for all generations */
+ hotplug_en |= hpd_mask_i915[encoder->hpd_pin];
+ /* Programming the CRT detection parameters tends
+ to generate a spurious hotplug event about three
+ seconds later. So just do it once.
+ */
+ if (IS_G4X(dev))
+ hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+ hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
/* Ignore TV since it's buggy */
@@ -2822,7 +2853,9 @@ static irqreturn_t i965_irq_handler(int irq, void *arg)
DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
hotplug_status);
- if (hotplug_status & dev_priv->hotplug_supported_mask)
+ if (hotplug_status & (IS_G4X(dev) ?
+ HOTPLUG_INT_STATUS_G4X :
+ HOTPLUG_INT_STATUS_I965))
queue_work(dev_priv->wq,
&dev_priv->hotplug_work);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5e995ec0951d3..97033077d0017 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1642,6 +1642,12 @@
#define SDVOC_HOTPLUG_INT_EN (1 << 25)
#define TV_HOTPLUG_INT_EN (1 << 18)
#define CRT_HOTPLUG_INT_EN (1 << 9)
+#define HOTPLUG_INT_EN_MASK (PORTB_HOTPLUG_INT_EN | \
+ PORTC_HOTPLUG_INT_EN | \
+ PORTD_HOTPLUG_INT_EN | \
+ SDVOC_HOTPLUG_INT_EN | \
+ SDVOB_HOTPLUG_INT_EN | \
+ CRT_HOTPLUG_INT_EN)
#define CRT_HOTPLUG_FORCE_DETECT (1 << 3)
#define CRT_HOTPLUG_ACTIVATION_PERIOD_32 (0 << 8)
/* must use period 64 on GM45 according to docs */
@@ -1680,6 +1686,26 @@
#define SDVOB_HOTPLUG_INT_STATUS_I965 (3 << 2)
#define SDVOC_HOTPLUG_INT_STATUS_I915 (1 << 7)
#define SDVOB_HOTPLUG_INT_STATUS_I915 (1 << 6)
+#define HOTPLUG_INT_STATUS_G4X (CRT_HOTPLUG_INT_STATUS | \
+ SDVOB_HOTPLUG_INT_STATUS_G4X | \
+ SDVOC_HOTPLUG_INT_STATUS_G4X | \
+ PORTB_HOTPLUG_INT_STATUS | \
+ PORTC_HOTPLUG_INT_STATUS | \
+ PORTD_HOTPLUG_INT_STATUS)
+
+#define HOTPLUG_INT_STATUS_I965 (CRT_HOTPLUG_INT_STATUS | \
+ SDVOB_HOTPLUG_INT_STATUS_I965 | \
+ SDVOC_HOTPLUG_INT_STATUS_I965 | \
+ PORTB_HOTPLUG_INT_STATUS | \
+ PORTC_HOTPLUG_INT_STATUS | \
+ PORTD_HOTPLUG_INT_STATUS)
+
+#define HOTPLUG_INT_STATUS_I915 (CRT_HOTPLUG_INT_STATUS | \
+ SDVOB_HOTPLUG_INT_STATUS_I915 | \
+ SDVOC_HOTPLUG_INT_STATUS_I915 | \
+ PORTB_HOTPLUG_INT_STATUS | \
+ PORTC_HOTPLUG_INT_STATUS | \
+ PORTD_HOTPLUG_INT_STATUS)
/* SDVO and HDMI port control.
* The same register may be used for SDVO or HDMI */
@@ -3536,7 +3562,11 @@
#define SDE_PORTC_HOTPLUG (1 << 9)
#define SDE_PORTB_HOTPLUG (1 << 8)
#define SDE_SDVOB_HOTPLUG (1 << 6)
-#define SDE_HOTPLUG_MASK (0xf << 8)
+#define SDE_HOTPLUG_MASK (SDE_CRT_HOTPLUG | \
+ SDE_SDVOB_HOTPLUG | \
+ SDE_PORTB_HOTPLUG | \
+ SDE_PORTC_HOTPLUG | \
+ SDE_PORTD_HOTPLUG)
#define SDE_TRANSB_CRC_DONE (1 << 5)
#define SDE_TRANSB_CRC_ERR (1 << 4)
#define SDE_TRANSB_FIFO_UNDER (1 << 3)
--
GitLab