diff --git a/arch/arm/boot/dts/lpc3250-ea3250.dts b/arch/arm/boot/dts/lpc3250-ea3250.dts
index f46a11827ef6cd1c270c115855e2ad72005898ba..4adf4c96f79815cfd98ff30e6ab6ba41faace934 100644
--- a/arch/arm/boot/dts/lpc3250-ea3250.dts
+++ b/arch/arm/boot/dts/lpc3250-ea3250.dts
@@ -201,6 +201,7 @@ isp1301: usb-transceiver@2d {
&mac {
phy-mode = "rmii";
use-iram;
+ status = "okay";
};
/* Here, choose exactly one from: ohci, usbd */
diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts
index ebd19258e22b57a0654993e7534598d3da57a124..1b15f798794b69ce00f02d696d892622335c757e 100644
--- a/arch/arm/boot/dts/lpc3250-phy3250.dts
+++ b/arch/arm/boot/dts/lpc3250-phy3250.dts
@@ -134,6 +134,7 @@ &key {
&mac {
phy-mode = "rmii";
use-iram;
+ status = "okay";
};
/* Here, choose exactly one from: ohci, usbd */
@@ -201,8 +202,6 @@ mtd4@604000 {
};
&ssp0 {
- #address-cells = <1>;
- #size-cells = <0>;
num-cs = <1>;
cs-gpios = <&gpio 3 5 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 20b38f4ade375defa9c856cc0add75ade4158d09..7b7ec7b1217b89515b6c4455e1bc10538274d305 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -1,14 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* NXP LPC32xx SoC
*
+ * Copyright (C) 2015-2019 Vladimir Zapolskiy <vz@mleia.com>
* Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
*/
#include <dt-bindings/clock/lpc32xx-clock.h>
@@ -152,6 +147,7 @@ mac: ethernet@31060000 {
reg = <0x31060000 0x1000>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk LPC32XX_CLK_MAC>;
+ status = "disabled";
};
emc: memory-controller@31080000 {
@@ -185,6 +181,8 @@ ssp0: spi@20084000 {
interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk LPC32XX_CLK_SSP0>;
clock-names = "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -192,6 +190,8 @@ spi1: spi@20088000 {
compatible = "nxp,lpc3220-spi";
reg = <0x20088000 0x1000>;
clocks = <&clk LPC32XX_CLK_SPI1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -205,6 +205,8 @@ ssp1: spi@2008c000 {
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk LPC32XX_CLK_SSP1>;
clock-names = "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -212,12 +214,15 @@ spi2: spi@20090000 {
compatible = "nxp,lpc3220-spi";
reg = <0x20090000 0x1000>;
clocks = <&clk LPC32XX_CLK_SPI2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
i2s0: i2s@20094000 {
compatible = "nxp,lpc3220-i2s";
reg = <0x20094000 0x1000>;
+ status = "disabled";
};
sd: sd@20098000 {
@@ -232,7 +237,8 @@ sd: sd@20098000 {
i2s1: i2s@2009c000 {
compatible = "nxp,lpc3220-i2s";
- reg = <0x2009C000 0x1000>;
+ reg = <0x2009c000 0x1000>;
+ status = "disabled";
};
/* UART5 first since it is the default console, ttyS0 */
@@ -275,7 +281,7 @@ uart6: serial@40098000 {
i2c1: i2c@400a0000 {
compatible = "nxp,pnx-i2c";
- reg = <0x400A0000 0x100>;
+ reg = <0x400a0000 0x100>;
interrupt-parent = <&sic1>;
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
#address-cells = <1>;
@@ -286,7 +292,7 @@ i2c1: i2c@400a0000 {
i2c2: i2c@400a8000 {
compatible = "nxp,pnx-i2c";
- reg = <0x400A8000 0x100>;
+ reg = <0x400a8000 0x100>;
interrupt-parent = <&sic1>;
interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
#address-cells = <1>;
@@ -297,7 +303,7 @@ i2c2: i2c@400a8000 {
mpwm: mpwm@400e8000 {
compatible = "nxp,lpc3220-motor-pwm";
- reg = <0x400E8000 0x78>;
+ reg = <0x400e8000 0x78>;
status = "disabled";
#pwm-cells = <2>;
};
@@ -396,7 +402,7 @@ gpio: gpio@40028000 {
timer4: timer@4002c000 {
compatible = "nxp,lpc3220-timer";
- reg = <0x4002C000 0x1000>;
+ reg = <0x4002c000 0x1000>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
clocks = <&clk LPC32XX_CLK_TIMER4>;
clock-names = "timerclk";
@@ -414,7 +420,7 @@ timer5: timer@40030000 {
watchdog: watchdog@4003c000 {
compatible = "nxp,pnx4008-wdt";
- reg = <0x4003C000 0x1000>;
+ reg = <0x4003c000 0x1000>;
clocks = <&clk LPC32XX_CLK_WDOG>;
};
@@ -453,7 +459,7 @@ tsc: tsc@40048000 {
timer1: timer@4004c000 {
compatible = "nxp,lpc3220-timer";
- reg = <0x4004C000 0x1000>;
+ reg = <0x4004c000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
clocks = <&clk LPC32XX_CLK_TIMER1>;
clock-names = "timerclk";
@@ -479,7 +485,7 @@ timer2: timer@40058000 {
pwm1: pwm@4005c000 {
compatible = "nxp,lpc3220-pwm";
- reg = <0x4005C000 0x4>;
+ reg = <0x4005c000 0x4>;
clocks = <&clk LPC32XX_CLK_PWM1>;
assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
@@ -488,7 +494,7 @@ pwm1: pwm@4005c000 {
pwm2: pwm@4005c004 {
compatible = "nxp,lpc3220-pwm";
- reg = <0x4005C004 0x4>;
+ reg = <0x4005c004 0x4>;
clocks = <&clk LPC32XX_CLK_PWM2>;
assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;