To support Rx in-band wakeup, one must create an interrupt specifier with
edge sensitivity on Rx pin and an addtional pinctrl to reconfigure Rx pin
to normal GPIO in sleep state. Driver will switch to sleep mode pinctrl and
enable irq wake before suspend and restore to default settings when
resuming.

Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert RDA Micro SoC bindings to DT schema format using json-schema.

Cc: "Andreas Färber" <afaerber@suse.de>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.

Reported-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The third argument 'nomap' of early_init_dt_reserve_memory_arch() is
bool. It is preferred to pass it with a bool type parameter.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

There is no need to cast "u64" to "unsigned long long" before printing
it, as both types have been made identical on all architectures many
years ago.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

The example of the EHCI binding generates a bunch of warnings now that the
examples are validated too.

Most notably, phy-names isn't used at all, and the node name should be USB.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

When adding support for the DWMAC (and derivatives) bindings,
phy-connection-type was required, even though the previous binding required
the equivalent phy-mode.

Let's fix this by using phy-mode as we should have.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Both the allwinner and amlogic compatibles require that either the
allwinner,pipeline or the amlogic,pipeline property is set. This was
dropped during the conversion since we didn't have conditionals back then,
but we can express this properly now.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The simple-framebuffer binding has a compatible that isn't one of the valid
options. Since an Allwinner pipeline is being described, let's add the
matching compatible.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The child nodes of a mdio bus are supposed to be ethernet PHYs, with a reg
property. Make sure that's validated as well.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

MDIO controllers should have child nodes with a singe value in their reg
properties being the ID of the PHY in the bus.

Let's add the proper constraints on #address-cells and #size-cells.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The node name of an MDIO controller should be MDIO. Let's add a rule for
this.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Mixing 'maxItems' and scalar properties doesn't make much sense, so drop
'maxItems' as a single item is implied.

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-mtd@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>

Matching on the 'cpus' node was a bad choice because the schema is
incorrectly applied to non-Arm cpus nodes. As we now have a common cpus
schema which checks the general structure, it is also redundant to do so
in the Arm CPU schema.

The downside is one could conceivably mix different architecture's cpu
nodes or have typos in the compatible string. The latter problem pretty
much exists for every schema.

Signed-off-by: Rob Herring <robh@kernel.org>

The '#address-cells' and '#size-cells' properties were not defined in
the lm3630a bindings and would cause the following error when
attempting to validate the examples against the schema:

Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
'#address-cells', '#size-cells' do not match any of the regexes:
'^led@[01]$', 'pinctrl-[0-9]+'

Correct this by adding those two properties.

While we're here, move the ti,linear-mapping-mode property to the
led@[01] child nodes to correct the following validation error:

Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml:
led@0: 'ti,linear-mapping-mode' does not match any of the regexes:
'pinctrl-[0-9]+'

Fixes: 32fcb75c ("dt-bindings: backlight: Add lm3630a bindings")
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reported-by: Rob Herring <robh+dt@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Dan Murphy <dmurphy@ti.com>
[robh: also drop maxItems from child reg]
Signed-off-by: Rob Herring <robh@kernel.org>

Even though the DWMAC driver uses some driver specific properties, the PHY
core has a bunch of generic properties and can deal with them nicely.

Let's deprecate our specific properties.

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rob Herring <robh@kernel.org>

Switch our Allwinner H3 EMAC controller binding to a YAML schema to enable
the DT validation. Since that controller is based on a Synopsys IP, let's
add the validation to that schemas with a bunch of conditionals.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Switch our Allwinner A20 GMAC controller binding to a YAML schema to enable
the DT validation. Since that controller is based on a Synopsys IP, let's
add the validation to that schemas with a bunch of conditionals.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Switch the STMMAC / Synopsys DesignWare MAC controller binding to a YAML
schema to enable the DT validation.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Switch our Allwinner A10 MDIO controller binding to a YAML schema to enable
the DT validation.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Switch our Allwinner A10 EMAC controller binding to a YAML schema to enable
the DT validation.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Unlike what was initially claimed in the PHY binding, the interrupt
property of a PHY can be omitted, and the OS will turn to polling instead.

Document that.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

While the Ethernet PHY framework was marked as maintained, the device tree
bindings associated to that framework was not listed under the maintained
files. Fix that.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The MDIO buses have a number of available device tree properties that can
be used in their device tree node. Add a YAML schemas for those.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

The networking PHYs have a number of available device tree properties that
can be used in their device tree node. Add a YAML schemas for those.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
[robh: drop maxItems from reg]
Signed-off-by: Rob Herring <robh@kernel.org>

The Ethernet controllers have a good number of generic options that can be
needed in a device tree. Add a YAML schemas for those.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the PSCI binding to use DT schema format.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert Conexant Digicolor SoC bindings to DT schema format using json-schema.

Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert NXP LPC32xx SoC bindings to DT schema format using json-schema.

Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert MOXA ART SoC bindings to DT schema format using json-schema.

Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert Axxia SoC bindings to DT schema format using json-schema.

Cc: Anders Berg <anders.berg@lsi.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The board bindings for IPQ4019 are undocumented. Add the missing bindings
to the schema.

Cc: Andy Gross <agross@kernel.org>
Cc: David Brown <david.brown@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

The SoC/board bindings for MSM8974 are undocumented. Add the missing
bindings to the schema.

Cc: Andy Gross <agross@kernel.org>
Cc: David Brown <david.brown@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

Convert Alpine SoC bindings to DT schema format using json-schema.

Cc: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

Pull in SPDX tag conversion from upstream dtc. This will replace the
conversion done in the kernel tree copy in v5.2-rc2.

This adds the following commits from upstream:

702c1b6c0e73 README.license: Update to reflect SPDX tag usage
4097bbffcf1d dtc: Add GPLv2 SPDX tags to files missing license text
94f87cd5b7c5 libfdt: Add dual GPL/BSD SPDX tags to files missing license text
c4ffc05574b1 tests: Replace license boilerplate with SPDX tags
a5ac29baacd2 pylibfdt: Replace dual GPLv2/BSD license boilerplate with SPDX tags
7fb0f4db2eb7 libfdt: Replace GPL/BSD boilerplate/reference with SPDX tags
acfe84f2c47e dtc: Replace GPLv2 boilerplate/reference with SPDX tags

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rob Herring <robh@kernel.org>

"git diff" says:

    \ No newline at end of file

after modifying the files.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

When CONFIG_OF_EARLY_FLATTREE is disabled, there is a compiler
warning,

drivers/of/fdt.c:129:19: warning: ‘of_fdt_match’ defined but not used [-Wunused-function]
 static int __init of_fdt_match(const void *blob, unsigned long node,

Since the only caller of of_fdt_match() is of_flat_dt_match(),
let's move the body of of_fdt_match() into of_flat_dt_match()
and eliminate of_fdt_match().

Meanwhile, move of_fdt_is_compatible() under CONFIG_OF_EARLY_FLATTREE,
as all callers are over there.

Fixes: 9b4d2b63 ("of/fdt: Remove dead code and mark functions with __init")
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Kontron is a leading embedded computer supplier. More information can be
found on: https://www.kontron.de/



Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>

STM32 serial can be reset via reset controller.
Add an optional reset property to stm32 usart bindings.

Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The "enable-method" property for cpu nodes needs to be "psci" for CPU
idle management to be setup correctly.

Add a note to the binding documentation to this effect to make it
obvious.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>