Make the frequently used lockdep global variable debug_locks read-mostly.
As debug_locks_silent is sometime used together with debug_locks,
it is also made read-mostly so that they can be close together.

With false cacheline sharing, cacheline contention problem can happen
depending on what get put into the same cacheline as debug_locks.

Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1539913518-15598-2-git-send-email-longman@redhat.com


Signed-off-by: Ingo Molnar <mingo@kernel.org>

It was found that when debug_locks was turned off because of a problem
found by the lockdep code, the system performance could drop quite
significantly when the lock_stat code was also configured into the
kernel. For instance, parallel kernel build time on a 4-socket x86-64
server nearly doubled.

Further analysis into the cause of the slowdown traced back to the
frequent call to debug_locks_off() from the __lock_acquired() function
probably due to some inconsistent lockdep states with debug_locks
off. The debug_locks_off() function did an unconditional atomic xchg
to write a 0 value into debug_locks which had already been set to 0.
This led to severe cacheline contention in the cacheline that held
debug_locks.  As debug_locks is being referenced in quite a few different
places in the kernel, this greatly slow down the system performance.

To prevent that trashing of debug_locks cacheline, lock_acquired()
and lock_contended() now checks the state of debug_locks before
proceeding. The debug_locks_off() function is also modified to check
debug_locks before calling __debug_locks_off().

Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1539913518-15598-1-git-send-email-longman@redhat.com


Signed-off-by: Ingo Molnar <mingo@kernel.org>

Wound/wait mutexes are used when other multiple lock
acquisitions of a similar type can be done in an arbitrary
order. The deadlock handling used here is called wait/wound in
the RDBMS literature: The older tasks waits until it can acquire
the contended lock. The younger tasks needs to back off and drop
all the locks it is currently holding, i.e. the younger task is
wounded.

For full documentation please read Documentation/ww-mutex-design.txt.

References: https://lwn.net/Articles/548909/


Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: rostedt@goodmis.org
Cc: daniel@ffwll.ch
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/51C8038C.9000106@canonical.com


Signed-off-by: Ingo Molnar <mingo@kernel.org>

For files only using THIS_MODULE and/or EXPORT_SYMBOL, map
them onto including export.h -- or if the file isn't even
using those, then just delete the include.  Fix up any implicit
include dependencies that were being masked by module.h along
the way.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

This reverts commit e0fdace1.

On-list discussion seems to suggest that the robustness fixes for printk
make this unnecessary and DaveM has also agreed in person at Kernel Summit
and on list.

The main problem with this code is once we hit a lockdep splat we always
keep oops_in_progress set, the console layer uses oops_in_progress with KMS
to decide when it should be showing the oops and not showing X, so it causes
problems around suspend/resume time when a userspace resume can cause a console
switch away from X, only if oops_in_progress is set (which is what we want
if an oops actually is in progress, but not because we had a lockdep splat
2 days prior).

Cc: David S Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Inspection is proving insufficient to catch all RCU misuses,
which is understandable given that rcu_dereference() might be
protected by any of four different flavors of RCU (RCU, RCU-bh,
RCU-sched, and SRCU), and might also/instead be protected by any
of a number of locking primitives. It is therefore time to
enlist the aid of lockdep.

This set of patches is inspired by earlier work by Peter
Zijlstra and Thomas Gleixner, and takes the following approach:

o	Set up separate lockdep classes for RCU, RCU-bh, and RCU-sched.

o	Set up separate lockdep classes for each instance of SRCU.

o	Create primitives that check for being in an RCU read-side
	critical section.  These return exact answers if lockdep is
	fully enabled, but if unsure, report being in an RCU read-side
	critical section.  (We want to avoid false positives!)
	The primitives are:

	For RCU: rcu_read_lock_held(void)

	For RCU-bh: rcu_read_lock_bh_held(void)

	For RCU-sched: rcu_read_lock_sched_held(void)

	For SRCU: srcu_read_lock_held(struct srcu_struct *sp)

o	Add rcu_dereference_check(), which takes a second argument
	in which one places a boolean expression based on the above
	primitives and/or lockdep_is_held().

o	A new kernel configuration parameter, CONFIG_PROVE_RCU, enables
	rcu_dereference_check().  This depends on CONFIG_PROVE_LOCKING,
	and should be quite helpful during the transition period while
	CONFIG_PROVE_RCU-unaware patches are in flight.

The existing rcu_dereference() primitive does no checking, but
upcoming patches will change that.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1266887105-1528-1-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: provide useful missing info for developers

Kernel taint can occur in several situations such as warnings,
load of prorietary or staging modules, bad page, etc...

But when such taint happens, a developer might still be working on
the kernel, expecting that lockdep is still enabled. But a taint
disables lockdep without ever warning about it.
Such a kernel behaviour doesn't really help for kernel development.

This patch adds this missing warning.

Since the taint is done most of the time after the main message that
explain the real source issue, it seems safe to warn about it inside
add_taint() so that it appears at last, without hurting the main
information.

v2: Use a generic helper to disable lockdep instead of an
    open coded xchg().

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1239412638-6739-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Otherwise lock debugging messages on runqueue locks can deadlock the
system due to the wakeups performed by printk().

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Generic lock debugging:

 - generalized lock debugging framework. For example, a bug in one lock
   subsystem turns off debugging in all lock subsystems.

 - got rid of the caller address passing (__IP__/__IP_DECL__/etc.) from
   the mutex/rtmutex debugging code: it caused way too much prototype
   hackery, and lockdep will give the same information anyway.

 - ability to do silent tests

 - check lock freeing in vfree too.

 - more finegrained debugging options, to allow distributions to
   turn off more expensive debugging features.

There's no separate 'held mutexes' list anymore - but there's a 'held locks'
stack within lockdep, which unifies deadlock detection across all lock
classes.  (this is independent of the lockdep validation stuff - lockdep first
checks whether we are holding a lock already)

Here are the current debugging options:

CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y

which do:

 config DEBUG_MUTEXES
          bool "Mutex debugging, basic checks"

 config DEBUG_LOCK_ALLOC
         bool "Detect incorrect freeing of live mutexes"

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>